You have chosen to sponsor your bid up to a maximum amount of .
I need a embedded c program/code for the project vehicle tracking and security system.
The project is based on the GPS, GSM modem and Cortex ARM M3 LPC1766-STK is used for in the project.
I have made the PCB for the project, I just need a software stuff for the same. The code should be for Cortex ARM M3 LPC1766-STK.
The code should contain following details.
1)The car doors can open or locked by SMS through mobile to system present in car.
2)The car ignition can be started or made off by SMS.
3)The tracking information at some time instant should be sent to owner's Mobile.
4)All the data should be stored as a logs in SRAM present in the system in car so that it will be checked further when connected to PC.
5) when someone trys to start the car the authentication SMS should be sent to owners mobile. If the person is familiar the keyword from owners mobile is sent to Device to start the engine. If owner denied the engine will remain off.
6) There should be 2 authentication mode. In 1 mode as owner's mode the car will start and no tracking information will be sent to owners mobile just stored in SRAM. and In 2nd mode the tracking information is continuously sent to owner after some instant and also stored in SRAM on system.
7) The feature should be such that the owner can send keyword to start or stop tracking anytime, also he can start stop car using SMS and also doors can be opened and and locked by the SMS.
ALL THE ABOVE CODING IS NEEDED FOR ARM CORTEX M3 1766-STK.
The development board schematic for the same project is attached below, Please find the attachment for the reference. You can also find out some details of development board on website www.olimex.com.
Also check the attach PPT file for the details of the project, software low and other details.
I AM COLLEGE STUDENT, NEED TO SUBMIT THIS PROJECT IN COLLEGE FOR PRESENTATION SO PLEASE BID ACCORDINGLY.