PLC & SCADA Programmers For Hire

  • PLC & SCADA
Suggestions:
more

Countries

Specific Location

Exams

Hourly Rate (USD)

Rating

Online

  • Hire trutony
    2.9
    3 reviews $30 USD per hour
    Control engineering & Power Electronics Expert, abundant experience in practical design and development of embedded systems. I controlled step motor, dc motor and different valves etc. with Motorola, Intel and PIC microcontrollers. I developed control system for ship engine and realized communication over CAN bus...
    Control engineering & Power Electronics Expert, abundant experience in practical design and development of embedded systems. I controlled step motor, dc motor and different valves etc. with Motorola, Intel and PIC microcontrollers. I developed control system for ship engine and realized communication over CAN bus between different control devices. I developed High speed and High torque control system for IPMSM(Interior Permanent Magnet Synchronous Motor). I have applied drive of LED, LCD and PWM etc. using all peripheral like GPIO, timers, UART, SPI, I2C and others of S3C2440- application processor for eLinux. -Matlab and Mathematics -Control Engineering -Power Electronics -Electrical Engineering -PLC & SCADA -Microcontroller -Embedded Software -Software Development -Algorithm -Artificial Intelligence(GA, IA, NN, Fuzzy Logic, PSO etc.) -C & C++ Programming -Electronics -Wireless less
  • Hire IdeaCentre
    3.0
    1 review $35 USD per hour
    Expertise in : ★ Research Writing. ★ PHP (Laravel, Cake, CI, YII, Zend) ★ AngularJs, , JavaScript ★ MySql, MongoDB ★ Magento, WooCommerce ★ WordPress, Drupal, Joomla ★ UI/UX Design ★ Graphic Designing (Photoshop, Illustrator) TERMS & CONDITIONS 1. I do not accept any award without creation of...
    Expertise in : ★ Research Writing. ★ PHP (Laravel, Cake, CI, YII, Zend) ★ AngularJs, , JavaScript ★ MySql, MongoDB ★ Magento, WooCommerce ★ WordPress, Drupal, Joomla ★ UI/UX Design ★ Graphic Designing (Photoshop, Illustrator) TERMS & CONDITIONS 1. I do not accept any award without creation of agreed amount of milestones. 2. After finishing your project I will only send you a final product ONLY if your profile has been verified i. e the email and phone number MUST be verified. 3. Remember to release milestone IMMEDIATELY you go through the product. 4. I offer revisions FREE of charge provided that no new instructions is introduced to the project. Revisions are limited to three times and no longer after two weeks. 5.I am bound to retain the copyrights of all content/product IF the employer is not willing to pay and this means that I can resell/publish the same at any given time without notice. 6. Freelancer Terms and Conditions APPLY. less
  • Hire ahmedmohamed85
    2.5
    1 review $50 USD per hour
    10 year's experience in digital system design using VHDL and verilog for FPGA's and CPLD's both for Xilinx and Altera Chips. I also have 10 years experience in working with Xilinx Ise form version 6.2 to 14.7 and Altera Quarus 2 for VHDL , verilog, system verilog and ip in addition to experience in Vivado design tool,...
    10 year's experience in digital system design using VHDL and verilog for FPGA's and CPLD's both for Xilinx and Altera Chips. I also have 10 years experience in working with Xilinx Ise form version 6.2 to 14.7 and Altera Quarus 2 for VHDL , verilog, system verilog and ip in addition to experience in Vivado design tool, and HLS and digital design using zynq7000 less
  • Hire rabbora
    2.4
    2 reviews $30 USD per hour
    ****I am 3D modeler&Architect& product designer!!! I also have experience to design and model house buildings by 3DS MAX, Sketchup, Autodesk Revit, Archicad, AutoCad, Chief Architect X9 and Lumion. I am using Solidworks, Creo, 3Ds max and Maya too to model some modeling. I have experience to design IC engines, Gas...
    ****I am 3D modeler&Architect& product designer!!! I also have experience to design and model house buildings by 3DS MAX, Sketchup, Autodesk Revit, Archicad, AutoCad, Chief Architect X9 and Lumion. I am using Solidworks, Creo, 3Ds max and Maya too to model some modeling. I have experience to design IC engines, Gas Turbine engines and various type jewelry ring using Solidworks , 3Ds max and maya, CATIA and Autocad. ****I am mechanical engineer(CFD/FEA)!!!! And I have experience to simulate CFD and strength analysis of IC Engine and Gas turbine engine using Ansys, Star CCM, and comsol. Especially, IC Engine modeling and combustion simulation and dynamical simulation and structure strength calculation. less
  • Hire arrowsoftSrls
    1.5
    1 review $50 USD per hour
    Hi everyone! Welcome in our Freelancer.com profile! We are a dynamic team of peoples that interact together in order to reach customers goals! We started our adventure in May 2015, in Castellabate, by merging together many skills come from heterogeneous environments. Starting from simple Wordpress website, We grew...
    Hi everyone! Welcome in our Freelancer.com profile! We are a dynamic team of peoples that interact together in order to reach customers goals! We started our adventure in May 2015, in Castellabate, by merging together many skills come from heterogeneous environments. Starting from simple Wordpress website, We grew up in Mobile App skills, 3D for Web (threejs & unity3d), Backend Integration and Data mining! We worked with great company and on big projects like Exerp, ACEA, Ecofficina and Adyen. Also, We follow the professionals by supporting them with our knowledge base. less
  • Hire sky19130
    1.1
    1 review $20 USD per hour
    An innovative, creative and analytical person that enjoys to acquire new knowledge and experience and to work with challenging tasks. I have 8+ years experience in electronics & circuit design, PCB Layout, manufacturing, wireless, embedded system. In these yerars, I have developed many products using various...
    An innovative, creative and analytical person that enjoys to acquire new knowledge and experience and to work with challenging tasks. I have 8+ years experience in electronics & circuit design, PCB Layout, manufacturing, wireless, embedded system. In these yerars, I have developed many products using various microcontroller including STM32 serial, Arduino, Raspberry Pi, Atmel, CPLD, FPGA, DSP, ARM, ADuC, USB controller etc. Also I have good experience in machine learning and Artificial intelligence, NN, mathematical algorithm analytics, statistics, communcation and control system theory. I am experienced in working with communication devices like WIFI, Bluetooth, Zigbee,...... etc. -Development Tools & Application Altium Designer, KICAD, EAGLE,NI Multisim, Logisim, OrCAD, ADS, HFSS, MATLAB, Quartus, CCS,Atmel studio, Micro C,MPLAB, Keil, AutoCad, Solidworks,Quatus II,programming language skill as python, C++, C,C # . I will always be to meet your requirements. Best Regards! less
  • Hire dsuclla88
    0.6
    1 review $22 USD per hour
    Hello World: Thanks for your read. +5 years documentated experience in most demanding work conditions around the largest mining operations of the world located in Peru. I have participated on more than 60 well succeed projects, used to accomplish 100% of the customer requiremets and more. A man of few words, no social...
    Hello World: Thanks for your read. +5 years documentated experience in most demanding work conditions around the largest mining operations of the world located in Peru. I have participated on more than 60 well succeed projects, used to accomplish 100% of the customer requiremets and more. A man of few words, no social media, and highly motivated. Academics: - M.Sc. Electrical & Electronics Engineering. - Specialist. Industrial Automation & Control Systems. Skills: - PLC, VFD & SCADA (Siemens, Omron , ABB, Rockwell AB and Schneider). - PCB Design (EAGLE, Altium), prototyping and line production. - Matlab (Math modeling and control design) - Native in PIC & Atmel microcontrollers. - Renewable energies for Industries. - Technical Drawing (AutoCAD). - LaTex, Professional & Academic reports. - Custom Design Control and Phase tracking for power Ultrasonics Systems. - Fluency in Spanish, Portuguese and English. Regards. less
  • Hire writer075
    0.7
    1 review $20 USD per hour
    With 10+ years of experience I've developed projects for wide variety of clients maintaining high standards to grow their business. I have worked with clients from all over the world and delivered on time quality service with end to end solutions. I deliver services on the following area: ☍ PHP and WordPress...
    With 10+ years of experience I've developed projects for wide variety of clients maintaining high standards to grow their business. I have worked with clients from all over the world and delivered on time quality service with end to end solutions. I deliver services on the following area: ☍ PHP and WordPress development ☍ Responsive Website Design & Development ☍ E-commerce development (Magento, WooCommerce, Joomla, Opencart, Prestashop and Other Open Source CMS) ☍ Logo & Banner Design ☍ Web Security, Malware Removal & Recovery ☍ Migration of Domain & Hosting ☍ Subscription Service & CRM Integration ☍ Bug Testing, Fixing & Reporting ☍ Website Maintenance & Products Upload ☍ Google Tag Manager, Webmaster Tools & Analytics Configuration ☍ Third Party Tracking Pixels, Custom Events & Conversions Tracking Integration Contact me today with your quiries and I'm available to answer your questions within short notice. less
  • Hire farazahmad759
    1.3
    1 review $20 USD per hour
    My areas of expertise are: 1- Circuit Design 2- Control Systems 3- Programming (Assembly, C, C++, Java, Matlab, HTML, PHP, CSS) 4- Matlab Simulink 5- Softwares: Etap, Keil, Orcad, Proteus, Matlab, PWS CONTACT HOURS: Monday: 3:30 GMT to 11:00 GMT Tuesday: 3:30 GMT to 11:00 GMT Wednesday: 3:30 GMT to 11:00...
    My areas of expertise are: 1- Circuit Design 2- Control Systems 3- Programming (Assembly, C, C++, Java, Matlab, HTML, PHP, CSS) 4- Matlab Simulink 5- Softwares: Etap, Keil, Orcad, Proteus, Matlab, PWS CONTACT HOURS: Monday: 3:30 GMT to 11:00 GMT Tuesday: 3:30 GMT to 11:00 GMT Wednesday: 3:30 GMT to 11:00 GMT Thursday: 3:30 GMT to 11:00 GMT Friday: 3:30 GMT to 7:15 GMT Saturday/Sunday: OFF less
  • Hire grinfactor
    2.0
    1 review $40 USD per hour
    Electrical Engineer - Controls & Automation Allen Bradley, Rockwell ABB Siemens Wonderware WinCC RS View FT
    Electrical Engineer - Controls & Automation Allen Bradley, Rockwell ABB Siemens Wonderware WinCC RS View FT less

Hey , here are some offline freelancers

Hey , here are some offline freelancers matching ""