RTOS Programmers For Hire
Showing 16 results
Sponsored Freelancers
-
✋ Hi there! I’m Abdul Majeed, an experienced Embedded Systems Engineer and Professional PCB Designer with expertise across a wide range of cutting-edge technologies. Here’s what I bring to the table: ⚡ Microcontroller Programming: ✔ Nordic: nRF51, nRF52, nRF53 ✔ TI: CC13xx, CC25xx, CC26xx, CC32xx ✔ 8051: Atmel,...✋ Hi there! I’m Abdul Majeed, an experienced Embedded Systems Engineer and Professional PCB Designer with expertise across a wide range of cutting-edge technologies. Here’s what I bring to the table: ⚡ Microcontroller Programming: ✔ Nordic: nRF51, nRF52, nRF53 ✔ TI: CC13xx, CC25xx, CC26xx, CC32xx ✔ 8051: Atmel, Intel, Nuvoton ✔ STM: STM8, STM32, BlueNRG-1, BlueNRG-2 ✔ AVR: 8-Bit, 32-Bit ✔ Cypress: BLE PSoCs ✔ Dialog Semiconductor: DA1458x, DA1453x ✔ ESP: ESP12, ESP32, ESP8266, ESP32 S3, ESP32 C3 ⚡ Electronic Development Boards: ✔ Arduino Uno, Nano ✔ STM32 Nucleo and Discovery ✔ TI's Launchpad ⚡ Single Board Computers: ✔ Raspberry pi ✔ Banana Pi ✔ Beaglebone Black ⚡ Electronics Modules: ✔ RFID and Fingerprint Modules ✔ RF Transceivers: Silicon Labs chips, Zigbee, Wi-Fi, Nordic, etc. ✔ Camera Modules: Omnivision ✔ Storage: SD card and memory chips ✔ Display Modules: LCD, GLCD, TFT, LED, OLED, etc. ✔ IoT Modules ⚡ Computer Software: ✔ Development IDEs: Keil, Visual Studio Code, STM32 Cube IDE ✔ PCB Design: Altium, Eagle, KiCAD, Easy EDA ✔ App Development: Blynk IOT, Adafruit IO, Arduino cloud, Thingsboard ⚡ Simulations Software ✔ MATLAB Simulink ✔ Proteus ✔ Logisim ✔ Multisim ⚡ IoT & Wireless Communication ✔ Proficient in Wi-Fi, BLE, Zigbee, LoRa, HTTP / HTTPS, and MQTT protocol. ✔ Expertise in wearable IoT devices, smart home automation, and industrial IoT projects. ⚡ System Integration & Prototyping ✔ Firmware and hardware integration for sensors, motors, and actuators. ✔ Real-time protocols: FTP, TCP/IP, and RTSP ✔ Extensive experience with streaming, data acquisition, and remote control systems. ⚡ Microcontroller-Based Projects: ✔ Automatic Street Light System: STM32-based power-efficient lighting system controlled by ambient light sensors. ✔ Gesture-Controlled Robot: ATMEGA32-powered robot using accelerometer and gyroscope modules. ✔ Smart Trash Bin: A touchless waste management system using proximity sensors and servo motors. ⚡ Industrial Projects: ✔ Industrial IoT Gateway: A robust NodeMCU-based gateway for connecting industrial devices to cloud platforms. ✔ Battery Management System (BMS): STM32-based controller for monitoring lithium-ion battery packs. ✔ Motor Driver PCB Design: Compact and efficient PCB for controlling DC motors with ESP32. ⚡ PCB Designing Projects: ✔ Power Supply PCB: Design of a regulated dual-output power supply with overcurrent protection. ✔ Custom Sensor Node PCB: Low-power PCB with temperature, humidity, and pressure sensors for wireless data transmission. ✔ RF Module PCB: Compact PCB for RF communication with optimized antenna layout. ⚡ Why Choose Me? ✔ On-time delivery and top-notch quality at reasonable rates. ✔ Free support and maintenance after project completion. ✔ Client satisfaction is my top priority! Let’s bring your ideas to life with innovation and precision! Any questions? Interested in working with me? Send me a message or hit the ‘Hire Me Now’ button and let’s get started! less
Hire majeed219
-
I have a Bachelor of Science in Electrical Engineering and have been concentrating my design and development efforts in embedded control devices. I design discrete, microprocessor controls, analog, and firmware. My firmware experience includes assembly language in many microprocessors as well as higher level languages...I have a Bachelor of Science in Electrical Engineering and have been concentrating my design and development efforts in embedded control devices. I design discrete, microprocessor controls, analog, and firmware. My firmware experience includes assembly language in many microprocessors as well as higher level languages of C, C+, and C#. less
Hire DenisLeeLarson
-
Zephyr RTOS contributor and Technical Product Manager with 2 years of product management experience and 9+ years of hands-on technical expertise in IoT, embedded systems, and smart home technologies. Proven ability to bridge engineering and business needs, leading cross- functional teams to deliver...Zephyr RTOS contributor and Technical Product Manager with 2 years of product management experience and 9+ years of hands-on technical expertise in IoT, embedded systems, and smart home technologies. Proven ability to bridge engineering and business needs, leading cross- functional teams to deliver scalable hardware/software solutions. Deep knowledge of wireless protocols (BLE, Zigbee, LoRa, Matter) and agile product development. less
Hire molinary20
-
Hello, I am Joaquin, a Professional Electronics and Electrical Engineer with strong hands-on experience in PCB design, embedded systems, IoT, and firmware development. I am specialized in RF & antenna design, wireless communication systems, and power electronics, including DC-DC converters and power management...Hello, I am Joaquin, a Professional Electronics and Electrical Engineer with strong hands-on experience in PCB design, embedded systems, IoT, and firmware development. I am specialized in RF & antenna design, wireless communication systems, and power electronics, including DC-DC converters and power management circuits. I also have experience in mechanical design and CAD modeling, including enclosures, thermal management, and integration of electronic systems into mechanical structures. I have a proven ability to take products from concept and schematic through PCB layout, firmware integration, prototyping, testing, mechanical integration, and production support. I am experienced in working with multidisciplinary teams and delivering reliable, manufacturable designs for commercial and industrial applications. less
Hire joaquinc48
-
mandalsurajkumar mandalsurajkumar
$50 USD / hour
Firmware Engineer | Embedded Software EngineerIndiaHii, I am Suraj Kumar Mandal. I am a Embedded Software Engineer and I have been working in this field from last 2 years. My skill include end to end harware project from ideation stage to production ready product. This include analyzinf idea, design circuit, PCB designing, firmware development, testing and...Hii, I am Suraj Kumar Mandal. I am a Embedded Software Engineer and I have been working in this field from last 2 years. My skill include end to end harware project from ideation stage to production ready product. This include analyzinf idea, design circuit, PCB designing, firmware development, testing and validation. My core skill include: PCB designing using KiCAD STM 32 Cube IDE, Arduino IDE, PlatformIO & VS code, ESP IDF STM 32, ESP 32, Arduino UNO FreeRTOS OpenOCD, GDB Thank you less
Hire mandalsurajkumar
-
My commercial experience has been primarily in embedded software development for medical device development - C programming, microcontrollers (PIC, Atmel AVR and STM32s), real-time operating systems, API design and communication protocols. I have experience in the development of Graphical display with TouchGFX tool...My commercial experience has been primarily in embedded software development for medical device development - C programming, microcontrollers (PIC, Atmel AVR and STM32s), real-time operating systems, API design and communication protocols. I have experience in the development of Graphical display with TouchGFX tool from STM32. less
Hire niikk93
-
⭐️⭐️⭐️⭐️⭐️ Embedded Systems Engineer with over 4 years of industry experience delivering complete, production-ready solutions in hardware design, firmware development, and product integration. As a freelance engineer, I’ve collaborated with startups and established companies to bring over 20 products to market...⭐️⭐️⭐️⭐️⭐️ Embedded Systems Engineer with over 4 years of industry experience delivering complete, production-ready solutions in hardware design, firmware development, and product integration. As a freelance engineer, I’ve collaborated with startups and established companies to bring over 20 products to market across the consumer, industrial, and medical sectors. I work across the full product lifecycle — from early specification and prototyping to manufacturing support and field testing. My expertise spans custom PCB design, RTOS-based and bare-metal firmware, and embedded Linux systems, using technologies like Altium, STM32, nRF52, ESP32, FreeRTOS, Zephyr, and more. I also support clients with architecture decisions, hardware/firmware co-design, and design optimization for cost, manufacturability, and reliability. Relevant Skills: ● Hardware design and PCB development (Expert) - Custom PCB design: Rigid, Flex and Rigid-flex technologies. - EDA tools: Altium Designer, OrCAD and KiCAD. - System-level design and project planning. - Schematic capture and library management. - Multilayer layout design following IPC and industry best practices. - High-speed digital, mixed-signal, RF/wireless, and power electronics design. - Interfaces: DDR, LVDS, HDMI, SATA, USB, Ethernet. - Circuitry: DC-DC converters, MCU/MPU/SoCs, ADCs/DACs, sensors, etc. - Familiar with PCBA manufacturing/assembly requirements and DFM/DFT rules. ● MCU Firmware programming (Advanced) - Languages: C, C++, Rust, ARM Assembly. - IDEs and tooling: Eclipse-based, VSCode, bare-metal toolchains, Make/CMake. - Firmware architectures: Bare-metal, RTOS, HAL/LL APIs. - RTOS: FreeRTOS, Zephyr (hands-on experience). - Ecosystems: STM32 (HAL/LL), Espressif (ESP-IDF), Nordic (nRF SDKs). - Version control: Git and SVN. - Familiarity with MISRA C/C++ standards - Architectures: ARM Cortex-M/R, Xtensa (ESP32). - Driver development: I2C, SPI, UART, ADC, PWM, external ASICs. - Protocols & stacks: BLE, LoRaWAN, HTTPS, MQTT. ● Embedded Linux development (Intermediate) - Linux for custom hardware platforms (MPUs). - Yocto Project: Linux distribution configuration and build. - Device tree and kernel driver development (sensors, ASICs, etc.).- Application development in C, C++, Python, Rust. - ARM Cortex-A architecture familiarity. ● FPGA & HDL Development (Intermediate) - FPGA/SoC development using Verilog, SystemVerilog, and VHDL. - Platforms: Xilinx Spartan-7, Zynq-7000; Intel (Altera) Cyclone, MAX series. - Custom IP design and hardware/software integration. - Familiarity with AXI/AMBA bus architectures. If you’re interested in working with me, I’m available via Freelancer and will always answer your questions or requests promptly. Thank you for your time and have a great day. less
Hire cmsivolella
-
I have 7 years experiance in my bussiness. I graduated from ITU electronic(bec). Problem solver one of my best tags. Some keywords that I am professional on: Raspberry Pi Python Embeded systems Microcontrollers,ARM, STM32, C8051. UART,I2C,I2S,SPI,RS232,RS485. PMBus, SMBus. More than 4 years I am working for a company...I have 7 years experiance in my bussiness. I graduated from ITU electronic(bec). Problem solver one of my best tags. Some keywords that I am professional on: Raspberry Pi Python Embeded systems Microcontrollers,ARM, STM32, C8051. UART,I2C,I2S,SPI,RS232,RS485. PMBus, SMBus. More than 4 years I am working for a company working on transmitters and broadcasting. I am team leader on R&D department. We have a break as company because of Covid-19. I am going to glad to work with someone who need professional help. less
Hire hakanulusoy
-
I am experienced embedded developer and HW designer/developer with 10+ years of experience. For HW design, I am experienced with Autodesk Eagle and I have some experiences with another electronics and PCB design SW (Mentor Graphics suite and much more). I am embedded C programmer with experience of using different...I am experienced embedded developer and HW designer/developer with 10+ years of experience. For HW design, I am experienced with Autodesk Eagle and I have some experiences with another electronics and PCB design SW (Mentor Graphics suite and much more). I am embedded C programmer with experience of using different platforms (MSP430, PIC, ARM,...), using most of microcontroller's peripherals and embedded and low-level industrial buses. I have some experiences in using RTOSes (TI-RTOS (Sysbios), RTX, ...). I developed multiple PC applications using C# with WindowsForms less
Hire Payne003
-
Thank you for visiting my profile. I am a Japanese senior software engineer. I work across IoT, embedded systems, firmware, web, and mobile. I like simple plans, small milestones, and steady delivery. My style is calm and precise. I do not overpromise. I design and ship real products end-to-end ( IoT + Firmware +...Thank you for visiting my profile. I am a Japanese senior software engineer. I work across IoT, embedded systems, firmware, web, and mobile. I like simple plans, small milestones, and steady delivery. My style is calm and precise. I do not overpromise. I design and ship real products end-to-end ( IoT + Firmware + Apps. From sensor to dashboard, clean and reliable. ) : * Firmware – ESP32/STM32/Arduino, FreeRTOS, BLE/Wi-Fi, sensors, OTA * Embedded Linux – Raspberry Pi setup, services, device I/O * Electronics bring-up – pin assignment, drivers, test firmware, basic PCB tweaks * Web dashboards – React/Next.js, charts, auth, APIs * IoT backends – Node.js, MQTT, AWS IoT/Azure IoT, alerting * Mobile apps – React Native/Flutter with BLE/Wi-Fi device control * QA & Docs – test plans, acceptance criteria, handover training # Tech Stacks I will provide : * Firmware: C/C++, ESP-IDF, STM32 HAL/LL, FreeRTOS, OTA, drivers * Embedded Linux: Raspberry Pi, Python/C++, systemd, Bash * Protocols: BLE, Wi-Fi, MQTT, Modbus, CAN (basic), REST/WebSocket * Web: React, Next.js, TypeScript, Node.js, Express, PostgreSQL * Mobile: React Native, Flutter, Bluetooth integrations * Cloud/DevOps: AWS IoT, Azure IoT, GCP, Docker, GitHub Actions * Tools: Git, JIRA, Zephyr (basic), Altium/KiCad (review & handoff) I write clean, tested code and clear README. I document pins, protocols, and build steps. I share short demos often. Time zones: PST/UK friendly. Languages: Japanese (native), English (Fluent). If you have a device to connect, data to visualize, or a prototype to turn into a stable product, I will help. Please send a short brief. I will reply with a simple plan, estimate, and timeline. less
Hire Taiga0420
