Aircraft propulsion jobs
The goal is to complete a Final Year Project (FYP) focused on the design and optimization of a low-speed UAV tailored for cloud seeding. The project involves: - Using OpenVSP for wing planform area optimization. - Comparing airfoil shapes through published works, particularly at low Reynolds numbers, using tools like XFLR5. - Applying theoretical knowledge in aerodynamics and aircraft design to develop an optimized UAV design. - Deliverables include data validation on VSPAero and XFLR5, as well as performance evaluation focusing on airfoil selection and wing design. The interim report will be shared to serve as a foundation for this work.
My drone’s flight control software is showing serious stability problems—unexpected pitch and roll changes that make the aircraft drift even in calm conditions. I need an engineer or developer who can dive into the existing flight-control codebase, pinpoint what is causing the instability, and implement a solid, tested fix. The job starts with a code review to isolate the root cause in the flight-control module, followed by refactoring or patching the affected algorithms (PID tuning, sensor fusion logic, or any timing issues you uncover). Once the fix is in place, I’ll need a compiled firmware image plus clear documentation of the changes so I can reproduce the build and flash future units. Acceptance criteria • Drone must hover and track waypoints without...
...facilities, elevation, runway data and alert status. Simple pins or bare-bones text won’t be enough; the descriptive panel is essential. For each base, show the entire aircraft inventory and go beyond a mere list: – model name – full specifications (dimensions, power-plant, speed, ceiling, combat radius, weapon stations, endurance, upgrade block, etc.) – concise operational history plus its current status (active, reserve, undergoing MLU, retired). Regional context matters, so add an “external forces” layer that pulls in publicly sourced military details on Pakistan and China. I want weapon-system ranges, aircraft endurance envelopes and notable troop movements marked in a way that can be toggled on or off so the main map n...
...flying lessons. Sky Academy is about learning, theory and preparation. Audience: beginners (usually between 16 and 30 years old) who dream of flying. WHAT SHOULD THE LOGO COMMUNICATE: precision control freedom trust sense of calm DESIGN STYLE: Modern Minimalist Clean Inspiring ICON/SYMBOL You can use an Icon or a Symbol Keep it abstract and minimal IMPORTANT: Do NOT include any airplane No aircraft, no jet, no silhouette, no engine Aviation elements (like wings) can be used, but made very subtle TYPOGRAPHY Modern font Clean and easy to read COMPOSITION Free composition Must work in different formats (logo, social media, icon) COLORS: Colors are free, but maximum 4 colors Keep it simple and modern WHAT TO AVOID: No complex or busy designs No generic aviation logos FE...
I'm looking for a talented graphic artist to create custom, cartoonish aircraft-related designs for shirts, patches, pins, and caps. Requirements: - Use existing graphic as a starting point - Create designs for multiple item types Ideal Skills & Experience: - Proficiency in graphic design software - Experience with cartoon-style illustrations - Ability to adapt and modify existing graphics Please provide a portfolio showcasing similar work.
I’m outfitting my scale model airplane with an LED lighting system that switches on automatically whenever someone (or another object) comes close to the aircraft. The motion-sensing method must rely on proximity detection rather than vibration or general movement. already has lights. looking to install motion sensor and on off toggle switch. the touch sensor it currently has is shit and wont stay on for more then 20 sec.
...simple for the user yet sophisticated behind the scenes. A technician selects or scans the reported fault; the app immediately serves the relevant AMM decision tree, predicts the likeliest branch using predictive analytics, and records each action the mechanic takes. At the end of every task the app stores the completed log so that subsequent interventions on the same tail number draw on real, aircraft-specific history rather than a blank slate. Data you will be working with starts as manually entered maintenance logs exported from our existing MIS. I’m open to broadening that to sensor feeds or historical fault libraries later, so a clean, extensible data pipeline matters. Key deliverables • Cross-platform mobile app (iOS + Android) built with a modern stack&mdash...
title: fleet plannning - 3.5k words Purpose of the assessment: LO-1: Make rational choices in aircraft selection LO-2: Evaluate the global economics underlying fleet planning according to the market, constraints, and the airline’s need PLO: LO-3: Compute data to successfully carry out fleet planning analysis LO-4: Propose an appropriate fleet type for a particular market - Must be in Pdf format, 1.5 spacing, 12-pt Times New Roman font and 2.54 cm margins on all four sides of your page with appropriate section headings. • Reference sources must be cited in the text of the report and listed appropriately at the end in a reference list using Harvard referencing style. Scenario: You are working in the Fleet Planning Department of a commercial airline operator (fixed win...
I need a production-ready 3D model of the A-4 Skyhawk in Blue Angels livery. The file must be deliv... and flag any undercuts that can’t be machined in a two-piece mold. Acceptance criteria 1. STEP/IGES/OBJ files open error-free and show as single, manifold solids. 2. All four sections meet flush with ≤0.1 mm gap. 3. Panel lines and rivets remain sharp after a 0.25 mm machining radius is applied. 4. No negative draft angles unless clearly identified. If you have previous aircraft tooling or scale-model experience, please include a link or screenshot so I can gauge fit and finish. I’m ready to start as soon as I see a brief plan of attack and an estimated turnaround. Please do not respond if you lack the ability to understand the importance of...
...platform that lets flight schools generate conflict-free schedules by weighing aircraft hours and maintenance windows, instructor ratings, and every student’s stage in the syllabus. The core challenge is orchestrating all of those moving parts in real time, not building another calendar view. For the backend I’ve settled on Node.js and a relational store such as PostgreSQL or MySQL, so your thinking should be comfortable with modern JavaScript/TypeScript, an SQL schema, and clear, well-documented REST (or GraphQL) endpoints. Robust system design, clean data modelling and the ability to codify complex business rules are what I care about most. First, we’ll run a paid test: • Define the initial data models (aircraft, maintenance events, instructor...
Hi, I have an idea for a patch, but I'd like to see how it turns out. I'd like to make a rectangular PVC-style patch, keeping in mind that it might not need a lo...rectangular PVC-style patch, keeping in mind that it might not need a lot of detail given the type of material used. In a retrowave style with a sun. Imagine it’s for an air show, so there need to be lots of aircraft, but they don’t have to be detailed—just recognizable enough to see the silhouette. I’ll have to see if I can make it stand out in relief on the patch Attached is an idea of what I want to do (it’s AI-generated) because I don’t know how to draw—that’s why I’m asking you. I definitely want a certain mountain range in the background, which ...
...logic and ascent guidance to apogee-pointed payload deployment and recovery sequencing. Expect a ground station link budget and fully scripted flight software (e.g., PX4, custom RTOS, or comparable stack). Deliverables (all files in open formats) • Preliminary mission analysis: trajectory, Δv, and thermodynamic constraints • Detailed CAD assembly with material specs and mass breakdown • Propulsion design sheet (solid, hybrid, or liquid—justify choice), including thrust curve and chamber analysis • Avionics architecture: sensor suite, flight computer layout, antenna gain study • Control algorithms and simulation results (MATLAB/Simulink or Python) proving closed-loop stability through max-Q and vacuum phases • Manufacturing pl...
I have a clear, top-down photograph of a modern fighter jet ready for you. Your task is to remove the background entirely and translate the aircraft into a high-resolution vector with crisp, accurate outlines—no blurring, jagged edges, or pixel traces. The finished artwork needs to scale beautifully for large-format printing, so please build it natively in Adobe Illustrator and send me the final .ai file. You can take creative initiative on the exact level of stylisation; I’m after a realistic look rather than a cartoon, but I don’t need every rivet—think clean panel lines, sharp wing edges, and a balanced overall silhouette. I’ll share reference notes once you start, yet I’m counting on your judgement to keep the geometry true to the source phot...
...project goes beyond sketches—I want a rigorously calculated design that proves every gram of payload and every newton of thrust. Here is what I have in mind. First, translate my high-level idea into a detailed CAD model that balances aesthetics, aerodynamics, and ease of manufacture. While doing so, size the frame, motors, ESCs, propellers, and battery around real-world component data so that the aircraft lifts the Raspberry Pi camera plus any wiring and gimbal with an ample safety factor. I expect you to back each selection with load, thrust, and power calculations, including flight-time estimates for both confined indoor hovering and longer outdoor sorties. Because the machine will operate in mixed environments, please address vibration isolation for clean imagery, prop...
Do you have experience in developing on the Service Now platform including Scoped Application Development or Customer Service Management (CSM) or Flow Design, Form Design, Table creation and management? Here's what you'd do: This client Enterprise Information Technology position involves leveraging ServiceNow to provide automated workflow process in support of aircraft in the field F-35, C-130, C-5, U-2, F-16 and F-22. The position will be working with a 9-person agile team to automated processes and provide functionality to both internal and external customers. Leverage ServiceNow to automate processes Design, develop, test, deploy, and maintain applications which support key Aeronautics Sustainment Organization Develop code which interacts with relational databases (SQL...
...flightradar, etc. Please only bid if you have either access to such tools or understand a way to get around this and fetch the data from freely available sources (scalable). *** For each leg I need these mandatory columns in the file: • Flight Number • Departure Time (local and UTC) • Arrival Time (same time standard as departure) • Departure Terminal • Arrival Terminal If you also have the aircraft type, include it as an extra column; it’s optional. The file must represent the full calendar month—no gaps, charter or cargo flights excluded. A short excerpt (one day or one airport) will be required first as a sample so I can confirm structure and data accuracy before we proceed with the entire month. Preferred characteristics &b...
...UK-based deep tech aerospace R&D company developing a novel heavy-lift VTOL UAV called StaticWing. The aircraft uses a proprietary ducted propulsion system and has a unique visual profile unlike any existing drone or eVTOL platform on the market. We require a skilled 3D animator to produce high-quality, photorealistic animations depicting StaticWing operating across several real-world use cases, including: Defence and military logistics Commercial cargo and logistics delivery Construction and heavy-lift operations Search and rescue We have existing 3D animation reference material from previous work that can be shared with the successful applicant to establish the visual style, aircraft geometry, and flight behaviour. CAD data and technical drawings can also be...
## Aerodynamic, Stability and Structural Load Analysis (XFLR5) I am seeking a detailed aerodynamic and structural analysis of a light aircraft wing and horizontal stabilizer using XFLR5. ### 1. Input Data I will provide: * Wing and tail geometry (DAT/XFLR5 file) * Mass distribution and CG locations * Flight condition matrix (angles of attack, airspeeds, altitudes) * Predefined operating points in spreadsheet format ### 2. Flight Conditions The analysis shall cover: * **Maximum speed:** 230 km/h at 2000 m altitude * **Cruise speed:** 190 km/h at 2000 m altitude * **Stall speed:** 83 km/h at 100 m altitude Angles of attack will be defined in the supplied dataset. --- ## 3. Aerodynamic Analysis Run XFLR5 simulations and provide: * Lift coefficient (CL), drag coefficient (CD...
...Fulfillment Core Concept: User enters trip details Platform displays available aircraft options User selects an option Submits a request (no direct payment) Request is manually reviewed Payment link is sent after confirmation Booking is completed after payment Important (Data Source Handling): The platform must be able to fetch and display aircraft listings from external sources, such as: APIs (if available) Affiliate / broker integrations Or alternative methods to retrieve data even if no official API exists Requirements: No redirects to external websites No exposure of the original data source Fully white-labeled experience inside the platform Scope of Work: Premium luxury UI Search + results system Aircraft details page Booking request system Order status...
I’m exploring a next-generation surveillance platform that runs on either hydrogen fuel cells or an ion propulsion variant. The aircraft must operate confidently across mixed environments—from tight urban corridors to wide rural expanses—while carrying a compact payload that combines: • Night-vision optics • Thermal-imaging sensor • High-resolution daylight camera What I need from you is a complete concept package that shows the technical path forward. This should cover a propulsion trade-off study (hydrogen vs. ion), flight-time and range projections, preliminary airframe drawings, power-management calculations, and a clear integration plan for the three-sensor payload. If you have experience with hydrogen tanks, fuel stacks, i...
...four individuals. The artist will integrate us naturally and realistically into the scene many different photos of each of us— each of us doing something different, spread across the composition so that no two of us are immediately adjacent. The Signature Background: The St. Barths Plane St. Barths' Gustaf III Airport is one of the most photographed runways in the world. The image of a small aircraft taking off — or on final approach — just above the beach crowd is iconic to anyone who has visited. This element belongs in our composite. Placement: Background — upper left or right quadrant, not centered Treatment: Sepia tone OR black and white — the artist may propose either Lighting: Dusk — golden hour fading to twilight, or deep blue-...
I have a Lua script running in X-Plane that leverages X-Camera to move around the aircraft during a pre-flight walk-around while a set of prerecorded comments plays. Right now the first spoken line is wrong, several remarks are being cut short, and the whole narration drifts out of sync with the camera views—sometimes lines fire early, sometimes they never play at all. By the halfway point the order is completely jumbled. I need the script cleaned up so every comment triggers in the right place, at the right moment, and plays through in full without crashing FlyWithLua or X-Camera. Once fixed I should be able to start the walk-around, watch the camera hit each preset, and hear the matching narration precisely when that view appears—no missing or out-of-order calls. Del...
...CEOs, COOs, or executive assistants, even better. Feel free to supplement those contacts with cold outreach or email nurturing if you think it moves the needle, but face-to-face relationship building should dominate your strategy. Day-to-day expectations • Build and manage a live pipeline in our CRM (HubSpot or Salesforce—your choice). • Coordinate in real time with our ops team for pricing, aircraft availability, and trip customization. • Deliver concise weekly reports on leads generated, quotes issued, and deals closed. • Represent the brand professionally at trade shows and follow up relentlessly after each event. Acceptance criteria 1. Ten qualified corporate prospects added to the CRM within your first 30 days. 2. Three signed charter agre...
...this on a 79% scale fully flying replica WWII P-51 Mustang Fighter airplane that I am purchasing. Device should be powered by 14 DC, needs a push button activation that will be installed in the aircraft yoke, an on/off switch, volume control, and speaker output as input to a Garmin GTN750xi communication radio. The airplane manufacturer and avionics installation company at onboard with the project and willing to assist. I already have a circuit design that I believe will make the sound I am looking for. I need it built and designed into a small form factor that can be produced in small scale. The aircraft is built under experimental certification, so there will be no STC or certification necessary for the install of this device. The link below is a design I found that so...
...position.” From that aircraft, smooth, gently arcing red paths should animate outward and land on every carrot marker—as if the plane is radiating connections across the territory. Think of the living maps you see on an airplane seat-back screen: simple, informative, and slightly dynamic, without any distracting flourishes. I’m happy with a clean MP4 (ProRes or high-bitrate H.264), but feel free to build the project in After Effects, Blender, or any tool you prefer as long as the final render meets spec and looks crisp. Audio isn’t required. Deliverables • 3-second video, 1920×1080 or higher, 16:9 • All sixteen locations marked with the supplied bright carrot icon • Realistic Boeing 737 positioned over Iglulik, NU • ...
I need a highly detailed commercial aircraft model for simulation and training purposes. The model should accurately replicate both the exterior and interior of the aircraft. Aircraft: Boeing 767 family Interior and Exterior Requirements: - 3D modeling expertise, particularly in aircraft - Proficiency in software like Blender, Maya, or 3ds Max - Experience in creating highly detailed, realistic models - Understanding of aircraft design and architecture Ideal candidates should provide a portfolio showcasing similar work. Please include your estimated timeline and any relevant experience.
I'm seeking an experienced 3D modeler and flight dynamics expert to develop a highly detailed helicopter for MSFS 2024. Key Requirements: - Highly detailed model with full realistic features - Fully realistic interior and cockpit design - Accurate exterior visuals Ideal Skills and Experience: - Proven experience in developing aircraft for flight simulators, especially helicopters - Strong 3D modeling skills - Knowledge of flight dynamics and simulator integration - Attention to detail and a passion for aviation realism Please include samples of previous work, particularly in the aviation sector.
...fuselage sections, wing panels, winglets, control surfaces (elevons, drag rudders, droop slats), spars, ribs, keel structures, and skin panels • Internal layout modelling: engine bay, fuel tank cavity, payload bay, avionics tray, intake S-duct, and exhaust tailcone • Top-level assembly files with all parts correctly mated, including symmetry mirror of the right half to produce the full aircraft • Engineering drawings (ISO third-angle projection) with dimensions, tolerances, section views, detail views, and a ZYKAR title block • STEP and IGES export files suitable for CFD meshing and CNC/mould toolpath generation • Parametric design using global equations and linked dimensions so that design changes propagate automatically What ...
...Scope • Basic external airframe details are enough—fuselage, wings, tails, intakes, and separate canopy assembly. • Omit landing gear and interior components. • Dimensional accuracy is critical even though I cannot supply reference drawings or measurements, so you’ll need to source reliable geometry data yourself. Deliverables • One watertight, non-mesh OBJ or STEP file of the complete aircraft. • The canopy saved as a distinct solid body within the same file. Acceptance Criteria • File opens as a solid in standard CAD software (e.g., SolidWorks, Fusion 360, Rhino). • Overall length, wingspan, and major cross-sections match published Block 40/50 specifications within normal manufacturing tolerances. • No ST...
...View" This concept is clean and modern, focusing on the literal and metaphorical perspective of flight. Front Design A placeholder for your corporate logo is positioned on the upper left chest, keeping the print simple and untouched. Back Design Colors: Deep Navy and White. Visual: A graphic vector illustration depicting the viewpoint from inside an aircraft window, looking out over a simplified landscape with clouds and other aircraft silhouettes in the distance. Tagline: "Elevate Your Perspective." Why this works: It's professional yet visually captivating. The window-view idea creates a narrative that is both relatable to aviators and inspiring to general attendees. Concept 2: The "Flight Path Blueprint" This concept has a more te...
...a fully remote role supporting global business aviation operations, including turboprops and helicopters. The ideal candidate will have strong operational knowledge, excellent attention to detail, and the ability to work in a fast-paced, time-critical environment. Key Responsibilities: • Plan and optimize flight routes for global business aviation operations, including turboprop and rotary aircraft • Perform detailed fuel planning, payload calculations, and mass & balance • Ensure compliance with RCF (Redispatch/RecClearance Fuel) and EDTO/ETOPS requirements where applicable • Conduct flight following, ensuring full compliance with GADSS: • 15-minute tracking under normal conditions • 1-minute tracking under abnormal conditions • Co...
...View" This concept is clean and modern, focusing on the literal and metaphorical perspective of flight. Front Design A placeholder for your corporate logo is positioned on the upper left chest, keeping the print simple and untouched. Back Design Colors: Deep Navy and White. Visual: A graphic vector illustration depicting the viewpoint from inside an aircraft window, looking out over a simplified landscape with clouds and other aircraft silhouettes in the distance. Tagline: "Elevate Your Perspective." Why this works: It's professional yet visually captivating. The window-view idea creates a narrative that is both relatable to aviators and inspiring to general attendees. Concept 2: The "Flight Path Blueprint" This concept has a more te...
Do you have experience in developing on the Service Now platform including Scoped Application Development or Customer Service Management (CSM) or Flow Design, Form Design, Table creation and management? Here's what you'd do: This client Enterprise Information Technology position involves leveraging ServiceNow to provide automated workflow process in support of aircraft in the field F-35, C-130, C-5, U-2, F-16 and F-22. The position will be working with a 9-person agile team to automated processes and provide functionality to both internal and external customers. Leverage ServiceNow to automate processes Design, develop, test, deploy, and maintain applications which support key Aeronautics Sustainment Organization Develop code which interacts with relational databases (SQL...
...fuselage and window plugs along the cabin randomly to emulate window shades. The base aircraft model itself must remain untouched—you will work in Blender, create the new geometry, UV-map it, apply a realistic texture set, and then position and parent the parts so they export cleanly back into the sim. Level of finish: moderate, with convincing baked textures rather than ultra-dense geometry. I will supply clear reference photos that show dimensions, placement, and the metallic surface look I’m after; use these to match shape and panel lines closely. Deliverables • Blender file with Satcom and window plug meshes, UVs, and metallic PBR textures • Export-ready glTF package (or native MSFS 2024 aircraft XML/CFG entries if you prefer) that lets me d...
I will send you a scanned CT-4 Airtrainer plan that currently mixes build notes with the drawings. Your task is to isolate every aircraft component—wing, fuselage, ribs and all remaining parts—then trace them accurately in CAD so the whole plan is sharp, scale-correct and print-ready. Target scale is 1 : 10 with a final wingspan of exactly 1128 mm. Please keep all original proportions and geometry intact; I simply need the clutter removed and any faint or broken lines restored so the file can drive both foam-board templates and balsa cut-outs later. Preferred formats • Clean vector DXF as the master file • Print-ready PDF laid out on a single A0 sheet (no tiling needed on my end) Dimensions, part numbers and the brief notes that appear on the original pl...
...rest) ⸻ Conversational AI Interface • Natural language chat interface for dispatchers • Context-aware responses tailored to operational workflows • Ability to handle complex, multi-step operational queries • Persistent session context for ongoing operational scenarios ⸻ Data Integration The platform must securely integrate with multiple aviation data sources, including: • Flight Plans • Aircraft Schedules • Crew Schedules • MEL/CDL (Minimum Equipment List / Configuration Deviation List) data • Operational and route-based risk assessments • Weather and NOTAM data (preferred) • Additional airline operational datasets as required ⸻ AI Capabilities • Deployment of private LLMs (open-source or fine-tuned mod...
I'm seeking an experienced mechanical engineer to finalize a fluid-based dispersal mechanism design. The concept is almost finished and needs to be detailed and prepared for CAD. Key requirements: - Mixing and combining two fluids in a 2.8:1 ratio. - Ejecting them laterally from an aircraft as a spray. Ideal skills and experience: - Proficiency in fluid dynamics and mechanical design. - CAD software expertise. System is designed to be simple, with minimal complexity/moving parts. Design brief will be given
...for each if the 10 chapters. This book is for Charity for MIND, I won't take any of the proceeds. Prologue Illustration – “Fleeting Moments” Scene Description: A wartime night sky over North Wales, centred around the tall chimney of the old Buckley Pottery. The chimney stands dark and solid in the foreground, slightly off-centre, acting as a silent landmark. In the sky above, a German bomber aircraft passes through low cloud, partially obscured, its silhouette lit faintly by moonlight. In the distance, searchlights cut through the sky, and a faint glow of fires or explosions can be seen on the horizon. Below, the landscape is quiet — rooftops, narrow streets, and shadowed buildings, untouched in this moment but under threat. One window is softly lit...
I'm looking for assistance in developing a liquid-fueled rocket engine for a high school research and testing project. This is a fun, educational endeavor rather than a commercial one. Key Requirements: - Design and build a liquid-fueled rocket engine - Ensure safety and compliance with regulations - Provide detail...rocket engine for a high school research and testing project. This is a fun, educational endeavor rather than a commercial one. Key Requirements: - Design and build a liquid-fueled rocket engine - Ensure safety and compliance with regulations - Provide detailed documentation and guidance Ideal Skills and Experience: - Background in aerospace engineering or related field - Experience with rocket propulsion systems - Strong understanding of safety protocols in roc...
...illustrations showing freight movement and process flows These must feel like they belong to the same illustration system. These illustrations will replace generic stock images and will be used throughout the website as key visual elements. Why illustrations (not stock photos) Most transport and logistics websites rely heavily on generic stock photos, often showing branded trucks, ships, or aircraft. This doesn’t suit our business model. Express Cargo is a 100% New Zealand–based freight broker. We do not own trucks, planes, or vessels — instead, we coordinate freight using a network of third‑party carriers. Because of this, we do not want imagery that promotes a branded fleet or suggests we operate our own vehicles. Illustrations allow us to: - Avoid misl...
...identify potential empty-leg opportunities on a daily basis. The goal is to spot aircraft availability early so I can act before brokers.. Scope of Work Each day, you will: - Monitor aircraft using: - ADS-B Exchange (primary) - Flightradar24 / FlightAware (for cross-checking) - Focus on: - Mumbai (VABB) - Bengaluru (VOBL) - Track only private jets (not airline flights) --- What You Need to Capture For each relevant aircraft: - Tail number (e.g., VT-XXX) - Aircraft type (Citation, Hawker, Falcon, Gulfstream, etc.) - Departure & arrival airports - Current position/status (parked / arriving / departing) - Estimated idle time (when aircraft may be available) --- Key Objective Identify: - Aircraft parked for long duratio...
I need a practical concept that embeds piezoelectric materials in a runway so that every aircraft landing converts impact and vibration into usable electrical power. The scope is strictly the landing phase, not take-offs, because the deceleration loads during touchdown offer the highest, most predictable pressure profile for piezo harvesting. Here is what I want to walk away with: • A conceptual layout of piezoelectric modules beneath or within the surface layers of the runway, sized for typical touchdown zones. • Material selection and justification (lead-zirconate-titanate, PVDF, or any advanced composite that meets aviation pavement tolerances). • Mechanical-to-electrical modelling that translates wheel loading, tyre pressure, landing speeds, and braking forc...
I need a practical concept that embeds piezoelectric materials in a runway so that every aircraft landing converts impact and vibration into usable electrical power. The scope is strictly the landing phase, not take-offs, because the deceleration loads during touchdown offer the highest, most predictable pressure profile for piezo harvesting. Here is what I want to walk away with: • A conceptual layout of piezoelectric modules beneath or within the surface layers of the runway, sized for typical touchdown zones. • Material selection and justification (lead-zirconate-titanate, PVDF, or any advanced composite that meets aviation pavement tolerances). • Mechanical-to-electrical modelling that translates wheel loading, tyre pressure, landing speeds, and braking forc...
...the fuselage and window plugs along the cabin randomly to emulate window shades. The base aircraft model itself must remain untouched—you will work in Blender, create the new geometry, UV-map it, apply a realistic texture set, and then position and parent the parts so they export cleanly back into the sim. Level of finish: moderate, with convincing baked textures rather than ultra-dense geometry. I will supply clear reference photos that show dimensions, placement, and the metallic surface look I’m after; use these to match shape and panel lines closely. Deliverables • Blender file with Satcom and window plug meshes, UVs, and metallic PBR textures • Export-ready glTF package (or native MSFS aircraft XML/CFG entries if you prefer) that lets me dr...
...producing a giveaway T-shirt for an upcoming aviation conference and need a designer who can balance simplicity on the front with something that is cool and inspirational on the back. Front Our corporate logo only—left side and left untouched so it prints clean. Back I want a aviation-themed illustration or scene that can grab attention. Think two or three colors at the max. Feel free to weave in aircraft outlines, a window view, headsets and an ispirational feeling. Style cues • Do a design that stands out in a crowded expo hall. • Artwork should stay conference-appropriate: clever but professional. Deliverables • Print-ready vector artwork (AI or EPS) for front and back, each on its own artboard. • High-resolution PNG mock-ups for quick previe...
...amazing, dressed in camo cargo shorts that rode low on her hips, with a white crop top and a floppy boonie hat and a matching OD green backpack. She was already running late for her “freedom flight” back to the states. She was doing her best to try and make him smile but he couldn’t, or wouldn’t. She was leaving and that was that. The rest of the USO celebrities were already on board the giant C-17 aircraft, but she was still standing in front of him, trying to make him smile. The load master was getting impatient, motioning for her to get on board. He still wouldn’t smile. He couldn’t hold himself back if he allowed any emotion at all. Then, she started walking slowly to the plane. When she stepped up on the cargo ramp, she turned, once again...
...each on its own page and built for easy copy-paste into a Word document: • Total operating costs: fleet lease/finance, parking, landing, and fuel, broken down by month and summed for the year. • Annual promotion & branding spend: itemised media channels, events, digital campaigns, aircraft livery, and contingency lines. • Full-year payroll: headcount, job titles, gross salary, statutory costs, and benefits totals. • Ticket pricing matrix: finalised high-season and low-season fares for each route or aircraft class. • Unit sales forecast: projected tickets sold per season, highlighting load factors and any assumed growth rates. • summary: consolidated annual sales revenue with notes on methodology and key drivers. add a concise...
I want to commission a complete design package for a foam-board C-130-inspired RC aircraft with a 12-foot wingspan. Its primary mission is cargo transport, so the airframe has to lift and safely fly a 10–12 lb payload stored in an internal bay positioned as close to the CG as practical. That bay must hold roughly five gallons of candy and let me load, secure, and, if desired, release the cargo in flight. Smooth ground handling and stable slow-speed behaviour are critical so that drops happen without drama. Structure & materials • All major components must be optimised for common dollar-store or Adams foam board, reinforced only where absolutely necessary to keep weight down. • A four-motor layout stays true to the Hercules look; please size powerplants and p...
...cathedral reverb Scene Breakdown Scene 1 — The Decision Time: 0:00–0:20 Visual Night. A dimly lit presidential office. Rain against the windows. A president sits alone behind a desk. A military advisor places a folder labeled: “TARGET AUTHORIZATION” The president hesitates. He signs. Narration Have mercy upon me, O God, according to Thy loving kindness. Scene 2 — The Launch Time: 0:20–0:45 Visual Aircraft carrier in the dark ocean. Technicians arm cruise missiles. Missiles ignite. Launch into the night sky. Narration According to the multitude of Thy mercies, blot out my transgressions. Scene 3 — The Flight Time: 0:45–1:05 Visual Missiles flying over clouds. Infrared targeting screens. A blinking target marker. Narration Wash me tho...
