Antenna measurements jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    14,929 antenna measurements jobs found, pricing in INR

    I need a frequency reconfigurable SIW antenna and its simulations on HFSS. The design will be rectangular SIW antenna. Antennas will reconfigure between 3 different bands that I will provide. Design should be novel and antennas will be made to reconfigure using different slots in structure and PIN diodes. An optimal DC circuit will also be designed to control diodes which should provide good isolation between RF signal and DC signal. Microstrip to SIW transitions will also be used while exciting antennas. Antennas should provide good S 11 parameter and gain in all desired bands. You have to provide me formulas that will be used to calculate different parameters of antennas like lengths and widths etc, design and simulations in HFSS using PIN diode which will be modeled using ...

    ₹2233 - ₹18605
    ₹2233 - ₹18605
    0 bids

    We have a platform we designed, its needs to be modeled in Solidworks. Would prefer someone near the Cleveland, OH area to meet if modeling or measurements are needed. I have some CADS for a lot of the parts within the platform. Deadline: 90 days

    ₹161866 (Avg Bid)
    Local
    ₹161866 Avg Bid
    20 bids
    Need a ARCHITECT (CBC 2019) 5 days left
    VERIFIED

    Hi, I need an architect for many projects and jobs I have coming up here shortly. Must be able to design to California Building Code 2019 and California regulations. Licensed or not is fine. Please send examples of previous projects, and your experience. Also, Lets example bid a pr...coming up here shortly. Must be able to design to California Building Code 2019 and California regulations. Licensed or not is fine. Please send examples of previous projects, and your experience. Also, Lets example bid a project... Need FULL architectural plans (elevations, sections, floorplans) for a 1000sq.ft. addition to an existing home/structure. I would provide sketches of floor plans/measurements/photos/Scans of notes. How much would something like that cost to complete? and how long woul...

    ₹20838 (Avg Bid)
    ₹20838 Avg Bid
    36 bids
    Data entry 5 days left

    Need professional drawings to pull a permit for a deck to the front door of the house can provide measurements if interested message

    ₹33043 (Avg Bid)
    ₹33043 Avg Bid
    16 bids

    I need a ground floor and a few upper floor plans adjusted - some apartments need to be replaced by communal areas. The footprint needs to be made smaller as well - simply remove a part of the existing footprint. Some of the upper floors (top of the building) have a different layout - larger apartments....plans adjusted - some apartments need to be replaced by communal areas. The footprint needs to be made smaller as well - simply remove a part of the existing footprint. Some of the upper floors (top of the building) have a different layout - larger apartments. Job needs to be done by Sunday evening (23-1-2022). I have pdf files that can be imported into autocad. If possible I'd like to have some measurements added - can be as text block. Files will only be shown to the success...

    ₹10791 (Avg Bid)
    ₹10791 Avg Bid
    63 bids

    I need someone to work with me and draw up an 3d autocad architectural model of my house renovation project from the provided floor plans and of course I will provide any measurements, site specification, picture, video as needed. The output would be - autocad file of the whole project - pdf of floor plans, elevations, required sections - existing and proposed changes. - design the stairs to the new entrance door as illustrated in the attached picture (or suggest a better version).

    ₹33936 (Avg Bid)
    ₹33936 Avg Bid
    97 bids

    i need technical support. I’m trying to make an attempt to measure the space left after the loss of tooth structure with the help of AI. Initially I will be giving you the measurements(length of the area where tooth is absent) and images of the area where tooth is absent, with the help of this data we need to train the machine in such a way that It can predict the length of the area where tooth is absent when a new image is given to it.

    ₹27908 (Avg Bid)
    ₹27908 Avg Bid
    11 bids

    make some plans, there are some photos already with measurements and make some plans to be able to make that sieve. Someone who is a mechanical designer is needed, to be able to these projects hacer unos planos , hay unas fotos ya con medidas y hacer unos planos para poder hacer esa zaranda. Se necesita alguien que sea diseñador mecánico, to be able to these proyect

    ₹3944 (Avg Bid)
    ₹3944 Avg Bid
    31 bids
    Row of townhouses 3 days left
    VERIFIED

    I need someone to draw a simple picture of: Row of townhouses no garages. Then I need 2 samples of the inside A: 10 single bdrs ( 5 up/ 5 down) B: 5 double occupancy (3 up/ 2 down). Both with living room and kitchen. Both houses will have 2 1/2 bth - with 2 showers/ 2 toilets/ 2 sinks, same for the 1 down. 1/2 bth off the kitchen. I have attached samples. I don't need measurements. It must fit on a regular size paper

    ₹13396 (Avg Bid)
    ₹13396 Avg Bid
    54 bids

    Aim -------------------------------------------------- We are creating a weight monitoring app, which needs to connect to a set of WI-FI Tuya Scales and sync measurements via the Tuya network. The user shouldn’t know Tuya is involved. Requirements -------------------------------------------------- 1. The user installs the app. 2. The user connects the Tuya Scales to their Wifi network and sets up the scales via the app (The user shouldn’t know Tuya is involved ) 3. The app saves the authorization details needed to query the users weight using the Tuya API. 4. Every time the app is opened, it queries the Tuya Api and displays the latest weight measurement. Platform -------------------------------------------------- 1. Development platform - Xamarin ...

    ₹53137 (Avg Bid)
    ₹53137 Avg Bid
    8 bids

    Due to the disability of a programmer (long...discovered after he became unavailable. Provide new source code and compiled file in Windows. Test for 30 minutes remotely. 2. Add additional input formats to this Demo file for potential customers that will allow use with other brainwave biofeedback input systems. Also in Windows. Provide new Source Code and test for 30 minutes remotely. 3. Provide further testing of the SDK (for creating measurements of Focus, Alertness. Happiness, and better Mood) which the Demo contains and displays. This has also been compiled for Android and iOS, but needs validation. 4. Ongoing projects to support customers and licensees. The first agreement will be for Stages 1 and 2. The rest are separate and will follow upon their successful c...

    ₹88710 (Avg Bid)
    ₹88710 Avg Bid
    22 bids

    We shall give you structural drawings and measurements, that has to be rendered in SketchUp.

    ₹2977 (Avg Bid)
    ₹2977 Avg Bid
    10 bids
    Deck for Home 2 days left

    Need professional drawings to pull a permit for a deck to the front door of the house. Can provide measurements.

    ₹28503 (Avg Bid)
    ₹28503 Avg Bid
    40 bids

    Looking for an experienced architectural draftsman/woman to capture photographs and field measurements of (2) apartments buildings downtown Chicago. Spaces include but are not limited to; main entrance/lobby, elevator lobby, amenity spaces, outdoor amenity space, and unit corridors. This task can be completed within 1-2 days. Professional conduct is required, as this will be an occupied building with tenants and management present. Tools You'll Need: Graph Paper (or plain white paper) Pens (I like to use a couple of different colors as my drawings show) Tape Measure (Ideally at least 25 feet long) Phone Camera

    ₹2456 / hr (Avg Bid)
    Local
    ₹2456 / hr Avg Bid
    6 bids

    Very simple project - just need a drawing that is to scale for a zoning application. Sketch is attached. MUST be to scale, and measurements marked. Would like final file in PSD and PDF formats.

    ₹1488 (Avg Bid)
    ₹1488 Avg Bid
    16 bids
    Open space 50m² -- 2 2 days left
    VERIFIED

    I need a project for a kitchen/living room in open-space with 3/4 different environments and solutions to my nedds. I'll provide photos, measurements and blueprints. I want the interior design in 2d and 3d. I pay 50€.

    ₹8633 (Avg Bid)
    ₹8633 Avg Bid
    32 bids

    I need a logo for our brand in 3D format. We want a lion logo which will be specific enough for sampling including measurements etc. We would like a lion and happy for designer to use some personal creativity. Ideas attached as to what we have so far and what needs further development. - 3D drawing face forward - 3D drawing side ways - drawings in different formats.

    ₹7144 (Avg Bid)
    ₹7144 Avg Bid
    93 bids

    can you please give information about this project, and its material used, and enhancement

    ₹1116 (Avg Bid)
    ₹1116 Avg Bid
    5 bids

    I have measurements and photos and would like a floor plan put together

    ₹3275 (Avg Bid)
    ₹3275 Avg Bid
    24 bids

    I am looking to create some custom kitchen cabinet doors using plywood. I need help producing the CAD files that will be used with th...have a grain in one direction and it would be best if all the pieces that share will go next to each other share the same grain direction. Some of the pieces will need to have some holes drilled for screws and a recessed area for the hinge bracket. The hing hole has a depth of 12mm, with the screw holes being 6mm. I found these files online which can be used as a guide for the location and measurements of these holes: - it will be super important that these are hyper accurate. So your task will be to neatly layout the pieces onto the plywood sheet. Then place the holes for the hinges. Is this a project that you can help me with? Thanks!

    ₹6251 (Avg Bid)
    ₹6251 Avg Bid
    44 bids

    ...THE PROJECT: -The PCB board must be a support plate for mounting external modules or with additional outputs, components such as resistors, capacitors, connectors, modules, etc. They must be components of the most Universal possible. The objective is to make the project more efficient and thus avoiding cables. The total measurement of the pcb card must have a maximum size without exceeding the measurements 9x15cm. -The screen has a simple menu that displays the data sensed in real time and uses the encoder to modify parameters such as the time, color of the rgb led strip, humidity level required to turn the pump on or off. -110v power source with 12v output and 15 amp power Below are the sensors to include: 1) ESP32 2) ZMPT101B 3)ACS712 30A 4) HYGROMETER MODULE X2 5) DHT11 TO IN...

    ₹14438 (Avg Bid)
    ₹14438 Avg Bid
    34 bids
    ₹1563 Avg Bid
    17 bids

    Need to capture measurements (Centimeters/INCHES) of a body through live webcam. Like waist, hips, height, waist, chest/bust, shoulder, length (arms, legs).

    ₹3647 (Avg Bid)
    ₹3647 Avg Bid
    4 bids
    Expert with QNAP 17 hours left

    Hi guys I had the Q locker virus last year; managed to decrypt my files but now I'm in the process of trying to wipe my drive clean autoruns and do an entire restart of my QNAP system with ALL SECURITY measurements and back up solutions in mind. I've always had issues when I first set up the QNAP having problems connecting it to my pc laptop and macbook with read and write issues. I'm absolutely fed up of the QNAP support as they aren't hands on at all and they don't communicate. I need someone to guide me through setting up the Qnap properly with extensive security and perhaps guide me on other steps I can take to increase security measures. I also use Plex media server which is why I would ideally still have Plex/the Qnap accessible online. I want someon...

    ₹21805 (Avg Bid)
    ₹21805 Avg Bid
    3 bids

    ...drawing to be done per week. more or less essentially here were the deductions made; we take out 1/8" (to width and to the height) for the glass to wall clamps hardware. (gap between the wall and the glass.) we take out 1/2" for the gap at bottom of the door for the door sweep. we take out 5/16" each side (total 5/8") for the door gap for the door seals. drawings were made based on centerline measurements, and the fixed panel passes in front of the return panel at the corner, so i have added half of the thickness of the glass so 3/16" (10mm glass = 3/8" , 3/8"/2 = 3/16" ) to the total width of the fixed panel, i have removed 3/16" for the return panel width for the same reason and i have also removed 1/8" at the all for the...

    ₹1191 / hr (Avg Bid)
    ₹1191 / hr Avg Bid
    19 bids
    Developing a LinkedIn Banner 9 hours left
    VERIFIED

    This project is about developing a banner for my LinkedIn profile. Normally, any LinkedIn profile has the default LinkedIn Banner is that big blue graphic above the profile photo. I want to replace it with a custom graphic that communicates my specialization. My specialty is Full Stack Developer. The banner should: 1. Has the required measurements of LinkedIn 2. Be clear and communicate the specialization 3. responsive and displayed properly in all devices and browsers. Terms & Conditions: - 1. The Designer should be willing to provide a couple of designs (max 3) 2. The Designer should be flexible and willing to modify the design 3. NO MONEY WILL BE PAIED without testing and verifying the banner. NOTE: Examples of banners could be shared with the Designer.

    ₹1712 (Avg Bid)
    ₹1712 Avg Bid
    31 bids

    Required floor plan drawing with 2d, 3d from all angles like realistic picture. All specification as given on floor plan, doors and window measurements with Materia specification as given. DWG format file required

    ₹2381 (Avg Bid)
    ₹2381 Avg Bid
    22 bids

    Please remove all indicia (designs, measurements, name, etc.) from the images. Keep the transparency look of the item.

    ₹7442 (Avg Bid)
    ₹7442 Avg Bid
    5 bids

    ...Proportional Control If you cannot complete the modelling exercise of Task 1, you will need to assume a suitable second order system for G1(s), with arbitrarily chosen parameters. Choose values to 1 decimal place, and not simple integer values. It is possible that you have developed a model for G1(s) which contains a right-half plane (unstable) pole. This is a legitimate outcome, depending on the measurements and calculations from Task 1, but also may be the result of an error in the working. In such as case, it is still possible that the control engineering problem is a perfectly reasonably one, however it may be more difficult to solve, and it some cases (depending on the value of the pole) the problem may be unsolvable, for example in Task 2. If you have deduced a model with a...

    ₹13991 (Avg Bid)
    ₹13991 Avg Bid
    4 bids

    ...Proportional Control If you cannot complete the modelling exercise of Task 1, you will need to assume a suitable second order system for G1(s), with arbitrarily chosen parameters. Choose values to 1 decimal place, and not simple integer values. It is possible that you have developed a model for G1(s) which contains a right-half plane (unstable) pole. This is a legitimate outcome, depending on the measurements and calculations from Task 1, but also may be the result of an error in the working. In such as case, it is still possible that the control engineering problem is a perfectly reasonably one, however it may be more difficult to solve, and it some cases (depending on the value of the pole) the problem may be unsolvable, for example in Task 2. If you have deduced a model with a...

    ₹149 / hr (Avg Bid)
    ₹149 / hr Avg Bid
    4 bids

    1600 square feet..I am looking for a cad drawing with measurements to submit for architect approval

    ₹8856 (Avg Bid)
    ₹8856 Avg Bid
    13 bids

    ...Proportional Control If you cannot complete the modelling exercise of Task 1, you will need to assume a suitable second order system for G1(s), with arbitrarily chosen parameters. Choose values to 1 decimal place, and not simple integer values. It is possible that you have developed a model for G1(s) which contains a right-half plane (unstable) pole. This is a legitimate outcome, depending on the measurements and calculations from Task 1, but also may be the result of an error in the working. In such as case, it is still possible that the control engineering problem is a perfectly reasonably one, however it may be more difficult to solve, and it some cases (depending on the value of the pole) the problem may be unsolvable, for example in Task 2. If you have deduced a model with a...

    ₹3795 (Avg Bid)
    ₹3795 Avg Bid
    7 bids

    ...the sports bar which is downstairs ( ground floor) DRAWING NO : 16-223 ARCH 2213 : Commercial 2 ( 154.0 m2) would be the proposed location for the Thai Restaurant which would be ( first floor) As explained above would need your expertise to produce an interior design both for the restaurant as well as the Sports Bar including the design, development , 3D Modelling and CAD drawings with measurements to suit for completion with a detailed plan. Myself and my colleague already had a detailed discussion of the proposal, and the idea is to have the Sports Bar ( downstairs) to be a Modern Bar equipped with state of art technology to suit modern needs with large screens etc. and good sound system and the Thai restaurant upstairs to be very Authentic feel and atmosphere as that ...

    ₹47332 (Avg Bid)
    ₹47332 Avg Bid
    76 bids

    The App has to do the following things: 1 Management system to upload the artwork with estimated measurements, name, and price tag. 2 Project the artwork into a wall and self-adjust. 3 Be able to hide and show the size, artist, and pricetag 4 send interested people to a contact form that auto-fills with the specific artwork 5 Has to be easily customizable to upload gallery logo and gallery info.

    ₹16224 (Avg Bid)
    ₹16224 Avg Bid
    10 bids

    Project to be completed in a 3 hours.

    ₹14786 (Avg Bid)
    ₹14786 Avg Bid
    9 bids

    Create a racking system for my van with all the correct measurements so i can take the file to my local wood seller and get it cut. My van is a Renault Trafic 2014 SWB SL27

    ₹5163 (Avg Bid)
    ₹5163 Avg Bid
    7 bids

    The task is to Design a Data warehouse using SQL DEVELOPER. The data is about water measurements from the duration 2000 to 2016. You have to design a star schema then perform a cleaning operation on it after that using linear regression train the model and predict the result

    ₹10642 (Avg Bid)
    ₹10642 Avg Bid
    6 bids

    ...the same 10 type of hardware... essentially here were the deductions made; we take out 1/8" (to width and to the height) for the glass to wall clamps hardware. (gap between the wall and the glass.) we take out 1/2" for the gap at bottom of the door for the door sweep. we take out 5/16" each side (total 5/8") for the door gap for the door seals. drawings were made based on centerline measurements, and the fixed panel passes in front of the return panel at the corner, so i have added half of the thickness of the glass so 3/16" (10mm glass = 3/8" , 3/8"/2 = 3/16" ) to the total width of the fixed panel, i have removed 3/16" for the return panel width for the same reason and i have also removed 1/8" at the all for the ...

    ₹744 / hr (Avg Bid)
    ₹744 / hr Avg Bid
    65 bids

    I am a bass guitar builder starting out. I tried to produce diagrams with measurements for manufacture, and although not to scale, I have the measurements. I need a way to turn my hand drawn schematics into usable manufacture files, DWG or AI. I have uploaded an example. I would also need to create a side elevation and rear aspect

    ₹6624 (Avg Bid)
    ₹6624 Avg Bid
    11 bids

    ...for all medication needs Drug-to-drug interaction checker Family and caregiver support via “Medfriend” functionality Medicine tracker Refill reminders Dr appointment manager and calendar Support for complex dose schedules Add “as needed” medications, vitamins and supplements Full selection of medications Daily, weekly & monthly med reporting with logbook to share with your doctor Track health measurements for various medical conditions (diabetes, hypertension, cancer, anxiety, depression, HIV, multiple sclerosis, MS, Crohn’s, lymphoma, myeloma and leukemia) e.g. weight, blood pressure, blood sugar levels Android Wear enabled Customizable reminders and time settings (i.e weekend mode so you can sleep in) Automatic time zone detection Easily custom...

    ₹35350 (Avg Bid)
    ₹35350 Avg Bid
    21 bids

    i want to setup woocommerce store , with an option to provide custom measurements . Only apply if you have proper idea about woocommerce themes and strong knowledge of best themes that we can use .

    ₹23714 (Avg Bid)
    ₹23714 Avg Bid
    50 bids

    ...common sense and anticipate unnecessary expenses. The relationship will work as follows. At the time I bid on jobs for my clients, I need a rough sketch/render to inspire my client to hire me. I will take interior photo of particular room, forward to you to do the "magic" and send back to show what we can deliver for them. If our company wins the bid, I will then take additional photos and measurements and have the clients design done based on their wishes. My pay structure will be as follows: $25-$50 USD for initial design for bidding purposes. (Turn around time: 24-48 hours) $150-$500 for final design based on scope of work. (Turn around time: 5 days) If you are interesting in working within this structure, please message and show me links with before and after...

    ₹1935 / hr (Avg Bid)
    ₹1935 / hr Avg Bid
    61 bids

    Design a simple floor layout for a steel bearer/joist floor. Measurements are metric system. Width 5m / Length 9m joist spacing 40cm U200/1,5mm & C200/1,5mm Only Outer walls will be load bearing on the floor Open to suggestions. Bid with a drawing this will safe me lots of time

    ₹9600 (Avg Bid)
    ₹9600 Avg Bid
    38 bids

    ...quality content to attract new users and to preserve existing users. Website Characterization - User Friendly CMS - User Friendly Dashboard - Leads Capture & Management - Hebrew Language - Section to insert & manage inside the dashboard scripts for non-tech users of the system, scripts such as Google Ads, Facebook, Google analytics etc... - Few features in the front-end such as calculators for measurements Requirements - Proof of work & Reviews is required - Perfect English and communication skills, effective communication is a must for this project. I must understand your accent easily or else I will not hire you. Limitations - WordPress is not accepted in this project or any other form of website builders, I want my website to be coded using custom code such as H...

    ₹33564 (Avg Bid)
    ₹33564 Avg Bid
    20 bids

    Design nice moulds for an alarm system Pir sensor Window and door contact sensor Sample is attached, our design should not look like that, our design should should show how the chip will fit into the mould Design of outside and inside Examples attached-ours must be attractive Measurements must be included

    ₹11684 (Avg Bid)
    ₹11684 Avg Bid
    33 bids

    We need a small guest cottage design done. I have basic measurements and a very crude drawing to work from. We live in Florida and would need the drawings stamped by an engineer here in Florida for permitting. Slab on grade pocket doors on bathroom and bedroom doors. stick frame w/ stucco exterior. roof trusses w/ asphalt shingle roof.

    ₹26494 (Avg Bid)
    ₹26494 Avg Bid
    17 bids

    Im looking for an architect to professionally design for me this house, the floor plan is on the pictures I have attached so they don't have to be creative and make something new. I will also need the details so that when I go to the glass manufactures I know what to show them when they make the glass for the house. ...looking for an architect to professionally design for me this house, the floor plan is on the pictures I have attached so they don't have to be creative and make something new. I will also need the details so that when I go to the glass manufactures I know what to show them when they make the glass for the house. As you can see from the pictures, the glass house is steel framed. So I will need measurements also. This is my first house so I will need all the...

    ₹29248 (Avg Bid)
    ₹29248 Avg Bid
    83 bids

    I have the measurements and details but need a cad drawing to bring it to life

    ₹11386 (Avg Bid)
    ₹11386 Avg Bid
    101 bids

    I have a home that is 24x65 have all measurements just need a digital rendering

    ₹8112 (Avg Bid)
    ₹8112 Avg Bid
    22 bids

    Fitness App Workout plan - videos (algorithm through questionnaire) Exercises - videos (algorithm through questionnaire) Nutrition - recipes & videos (algorithm through questionnaire) Habits Daily challenges (algorithm through questionnaire) Music (stre...videos (algorithm through questionnaire) Exercises - videos (algorithm through questionnaire) Nutrition - recipes & videos (algorithm through questionnaire) Habits Daily challenges (algorithm through questionnaire) Music (stress relief) Programs Packages Marketing e-shop (sports wear, supplements) financials (Swiss, German & Austrian market) Contacts Calendar (reminders - schedule measurements) Events Chat Groups Files Forms - Questionnaire Settings Support (very important) Connect with wearab...

    ₹2009 / hr (Avg Bid)
    ₹2009 / hr Avg Bid
    83 bids