Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    15,973 bluetooth jobs found, pricing in INR

    The experienced Embedded Engineer is required to assist with the development of a portion of the product for the automotive industry. Details will be shared over the zoom call. The project may take time from a few weeks to a few months. Also, if collaboration if successful, more work can be provided. Experience required: Bluetooth Low Energy. BLE = 5.0 (5.1 ideally). Experience with Nordic MCUs (critical), ideally with nrf528323 and nrf52840. Experience with BLE devices on Central and Peripheral configuration. Feel free to reach out to ask questions.

    ₹3284 / hr (Avg Bid)
    ₹3284 / hr Avg Bid
    5 bids

    The ultimate goal of this project is to develop a mobile application under iOS and Android that can interact with a bluetooth (Android and IOS) or USB (Android only) smartcard reader (ISO7861 compliant). The project will be executed in different phases. Phase 1: basic setup of the app (no interaction with a real SmartCardreader, only a mock of the reader) Phase 2: connectivity between the app and a BLE SmartCard reader on Android Phase 3: connectivity between the app and a BLE SmartCard reader on iOS Phase 4: connectivity between the app and a USB SmartCard reader on Android Note that the BLE device currently used is the ACSR3901SU. The details for phase 1 are described in attachment. For phase 1, we do not require that you have an experience with SmartCard reader...

    ₹50459 (Avg Bid)
    ₹50459 Avg Bid
    31 bids

    Need to build a sensor that using two points could measure the variation of a small current flow (mili Amps) going through a material when affected by heat or pressure. Data must be send through a Bluetooth interface.. The device must accept some basic configuration and offer a simple protocol communication with the linked application through the Bluetooth interface. Even when the drawing shows a finished product layout, the prototyping could be done on any type of board.

    ₹86587 (Avg Bid)
    ₹86587 Avg Bid
    12 bids

    Its native mobile app project (iOS and Android) to connect FORA blood glucose healthcare device (bluetooth 4.0 ble) and retrieve health data back to the mobile app. FORA is the brand name of the healthcare device.

    ₹127715 (Avg Bid)
    ₹127715 Avg Bid
    30 bids

    I am a dance teacher and I need an APP that acts as a digital metronome, using the vibration system of the devices, for helping my students to understand the rhythms of songs. The main idea is to create a shared metronome using the Bluetooth and the vibration of the mobile devices. The Main Device creates a vibration pattern, touching the screen 3 times in a row. This constant Pattern is transmitted by Bluetooth to the other devices making them vibrate. Due to possible time lags, the app must be able to stop the pattern to create a new one.

    ₹45831 (Avg Bid)
    ₹45831 Avg Bid
    23 bids

    i have a small project related to the reminder device. I'm using ESP32 controller to control my device and through Bluetooth data will be sent to App (ios+android). complete details are mentioned in document. Pakistani developer will be preferred. wanna hire long term for future projects.

    ₹3210 (Avg Bid)
    ₹3210 Avg Bid
    3 bids
    Android TV Games 4 days left

    Hi, I'm looking for a developer/team who can adapt HTML5 simple mobile games for Android TV along with developing a controller mobile application for browsing & playing games. In general, Controller mobile app should be able to establish the bluetooth &/Or WIFI connectivity with Android TV & once connectivity is established, user should be able to play games on TV via controller application. We will provide a HTML5 mobile game for this project which needs to be customised for TV screen along with above functionality.

    ₹120699 (Avg Bid)
    ₹120699 Avg Bid
    10 bids

    Bluetooth based mobile app, Real time data fetch from Bluetooth device, Used BLE manager to do the same, Nordic Bluetooth used in device

    ₹50011 (Avg Bid)
    ₹50011 Avg Bid
    12 bids

    Need to make a very simple app for remote control certain aspects of another phone via Bluetooth and Internet. Core things which will be needed to figure out - Background app refresh - Bluetooth connection - How to keep the app alive even with elongated periods of being in the background - How to make sure the controls work even if another app is in the foreground and active - Needs to be a simple and very little memory usage so that the device does not shut it down for want for memory - will he likely 4-5 screens only - Need one app for Google play store and one for apple - ideally a single app - Need to make sure that the iOS can control the android controls and vice versa as well - Will need a bit of design work as well - but the app is so simple that it should not be to...

    ₹10450 (Avg Bid)
    ₹10450 Avg Bid
    4 bids

    Hi Hong Thiet N., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    ₹5356 (Avg Bid)
    ₹5356 Avg Bid
    1 bids

    ...a swing (as rotated around to different angles on a 2D display). A properly operating software application is far more important first, and I have a couple of (Arduino-type?) hardware units put together by the most recent contractor that can hopefully be used. I have attached front and back images of one of the sensors for reference. While powered by USB cable, its data is sent wirelessly by Bluetooth, which is linked to my desktop. If it is important to know what any given components are and that cannot be made out on the images, please let me know. I would ideally like to proceed in two broad steps from here. First, I would preferably like to learn how to access all of the raw parameters and parameter data values the sensor is capable of providing when in use, be able to see ...

    ₹1791 / hr (Avg Bid)
    ₹1791 / hr Avg Bid
    10 bids

    I have some hardware that connects over bluetooth. I have traced the commands using a packet sniffer. I need to build a small test app that sends the commands as per my document and show outputs as needed.

    ₹746 - ₹6718
    Sealed
    ₹746 - ₹6718
    7 bids
    Android developer 3 days left
    VERIFIED

    Android App Developer Having Experience In Communicating With ESP32 Devices Over Bluetooth Interface To Help In Some Communication Issue Of Device Connection/Disconnection Problem Frequently n Some Data Reading Issue. Note: Android Code Is In KOTLIN (We Taken Some BT Code Reference In Our Code For Communication). Help Needed Remotely, We Have Device n Code With Us. Only Experience in BT Comm With ESP32 Device Candidate To Figure Out Issue Quickly.

    ₹1120 / hr (Avg Bid)
    ₹1120 / hr Avg Bid
    8 bids

    Need to develop a custom iOS app and interface with external bluetooth switch

    ₹1568 / hr (Avg Bid)
    ₹1568 / hr Avg Bid
    19 bids

    We have a web POS applicati... Units, Categories, Brand, Warranty) - Purchases Tab & Contents - Sell Tab (POS, List POS, Add Drafts, List Drafts, Add Quotation, List Quotations) - Expenses Tab & Contents - Reports (Profit & Loss, Product Sell Report, Register Report, Expense Report, Stock Report, Trending Reports) - Receipt Printers (We will provide 2 SDKs for 2 thermal printers) & add option to add a printer via Bluetooth - Add Bluetooth Printing - A link to Back Office at the bottom of the drawer menu - Toast reminder when internet is lost "You're currently working offline" user clicks ok to proceed. And can choose to either continue working offline or reconnect to the internet. Note* API has been provided from the web admin Please deliver ...

    ₹98753 (Avg Bid)
    ₹98753 Avg Bid
    51 bids

    We need a Bluetooth architect and developer to design and develop a file transfer and processing application between 2 mobile devices with Bluetooth technology installed.

    ₹2687 / hr (Avg Bid)
    ₹2687 / hr Avg Bid
    13 bids

    I use Bluetooth mobile printer not support Arabic font so I print Arabic text as bitmap Requirements - Select logo from picture & print as top - Print multi lines Arabic text as bitmap - Print 3 size for text printed - Print QR Code from enter text as bottom - EscPOS format printer - 2 Paper width 80mm & 58mm - print via Bluetooth - Use only C# with Xamarin Froms Android & iOS - Printer with both Android and iOS - Project with Full Source

    ₹10226 (Avg Bid)
    ₹10226 Avg Bid
    2 bids
    Trophy icon Speaker ID design 15 days left

    We would like to design a portable speaker with bluetooth which connect with notebooks or smartphones,it need novelty,portable and fashion. Also you can add some other elements for it if you have good we cannot accept the ID which already exist in market or very similar yoU.

    ₹37322 (Avg Bid)
    Guaranteed Top Contest
    ₹37322
    21 entries

    I need someone to make a feature to print Arabic text with Bluetooth thermal printer flutter... and stream check every second id printer connect now or disconnect

    ₹746 - ₹2239
    ₹746 - ₹2239
    0 bids

    Hi Mohd Syafiq A., I noticed your profile and would like to offer you a mobile app development project. Project brief: - Contract 1-3 months - iOS (Swift) or Android (Kotlin) - Based in Selangor / KL area - On site at Puchong - Bluetooth (BLE) connectivity experience required - Control machines using mobile app (think smart home app) We can discuss any details over chat.

    ₹1866 / hr (Avg Bid)
    ₹1866 / hr Avg Bid
    1 bids

    I would like to hire a professional developer/team that can develop an app for smartwatch. Below are the initial summarized requirements: To connect smartwatch with cellphone (Android/IOS) using Bluetooth to be able to share data such as: Make & receive calls using the watch Send & receive text using the watch Send & receive social media text on the watch Send & receive pictures & videos using the watch Make & receive WhatsApp calls using the watch I need to know a rough estimate: Estimated cost in CAD Estimated completion timeline Thanks Hamid Ayaz

    ₹207503 (Avg Bid)
    ₹207503 Avg Bid
    36 bids

    I would like to hire a professional developer/team that can develop an app for smartwatch. Below are the initial summarized requirements: To connect smartwatch with cellphone (Android/IOS) using Bluetooth to be able to share data such as: Make & receive calls using the watch Send & receive text using the watch Send & receive social media text on the watch Send & receive pictures & videos using the watch Make & receive WhatsApp calls using the watch I need to know a rough estimate: Estimated cost in CAD Estimated completion timeline Thanks Hamid Ayaz

    ₹243338 (Avg Bid)
    ₹243338 Avg Bid
    29 bids

    ** Skills Required - Knowledge of communication networking protocols like TCP and Eathernet - Languages like C , C#, and Python. - Should know how to carry out end to end IoT/IP systems that include connectivity, device, cloud, backend, applications, and analytics. - Experienced in working on wireless protocols like Wifi and Bluetooth - Experienced in acquiring field data through industrial gateway devices - Experienced in databases like Ms SQL. - Ability to Identify bottlenecks and bugs, and devise solutions to these problems - Experienced in dealing with Restful APIs **What's Required - Creating and developing devices, sensors and software - Designing, coding and testing features of IoT devices - Providing solutions to issues related to the connection of networks and platfor...

    ₹44189 (Avg Bid)
    ₹44189 Avg Bid
    21 bids

    I use Bluetooth mobile printer not support Arabic font so I print Arabic text as bitmap Requirements - Select logo from picture & print as top - Print multi lines Arabic text as bitmap - Print 3 size for text printed - Print QR Code from enter text as bottom - EscPOS format printer - 2 Paper width 80mm & 58mm - print via Bluetooth - Use only C# with Xamarin Froms Android & iOS - Printer with both Android and iOS - Project with Full Source

    ₹6046 (Avg Bid)
    ₹6046 Avg Bid
    4 bids

    We are using a 12V DC winch with a Remote. In Remote only two options. In and Out. If we hold the up button then it will rotate the motor in the forward direction. If we hold the down button it will rotate the motor in the reverse direction. I want to integrate that mechanism with Bluetooth mobile application. I have mobile application. Just need hardware list and programming code.

    ₹603 - ₹1508
    ₹603 - ₹1508
    0 bids

    We need a Network Stack Developer for our site - Work to be done: Peer to peer desktop application, related to network. Network administration Python Mongodb TCP & UDP Routers Wifi Bluetooth Wireshark

    ₹1493 / hr (Avg Bid)
    ₹1493 / hr Avg Bid
    8 bids

    Create an application which will be called as an intent from browser using javascript The parameters (or extras) will be printed to a connected bluetooth printer as pairs key : value The app should verify that the printer is available. and issue error messages if necessary. beside this it should work unvisible Calling the app 'stand alone' will open a screen which allows to enter 3 parameters and save them to a file. It will also allow to test the availability of the printer. The parameters will be read from the parameter file when the app starts. Use Kotlin - Should work o 4.4 +.

    ₹16123 (Avg Bid)
    ₹16123 Avg Bid
    19 bids

    ...Mode -> the phone must not be in power saving mode • Wi-Fi / Cellular -> Wi-Fi or mobile data must be enabled • Bluetooth -> Bluetooth must be activated The application must check the permissions granted at each start and if necessary request them: • Bluetooth -> Enabled + Background Modes: Uses Bluetooth LE accessories • Cellular Data -> Enabled • Location -> Always + Background Modes: Location updates • Precise Location -> Enabled • Background App Refresh -> Enabled • Notifications -> Enabled • Motion & Fitness -> Enabled + CMMotionActivity stationary walking running automotive cycling unknown The application must perform these functions: 1. Do a Bluetooth scan to fi...

    ₹19781 (Avg Bid)
    ₹19781 Avg Bid
    7 bids

    So in short I have a system similar to foodpanda, Uber eats and so on. The restaurant have a tablet or similar in the place. I need the possibility for a Thermal Printer to connect to it. It's a Web App (VueJS), so it might not have access to etc. Bluetooth. It's a PWA and therefor web based. So there are some possibilities: 1. Look at and their plug-ins for what has already been created or used () 2. Foodooma also has a thermal printer module: () 3. Check and how to utilize that 4. Check PaperCut Mobility Print 5. Setup a print server with a Raspberry PI as a print control box/ print server. I need the best and easiest solution

    ₹17541 (Avg Bid)
    ₹17541 Avg Bid
    9 bids

    From an existing Yocto version, we need to improve it by adding Bluetooth and CAN communications. The embedded plateform is a SMT32MP157F with a Cortex A7.

    ₹500112 (Avg Bid)
    ₹500112 Avg Bid
    2 bids

    So I want an animated cat (can be any level of spiriting, can provide sprites) to run across phone screen 1. When hitting the right edge of phone screen 1, it comes out the left end of phone screen 2. When it hits the right end of phone screen 2, it comes out the left end of phone screen 1 (or 3 if there are more phones linked in the application). I don't need advanced con...animated cat (can be any level of spiriting, can provide sprites) to run across phone screen 1. When hitting the right edge of phone screen 1, it comes out the left end of phone screen 2. When it hits the right end of phone screen 2, it comes out the left end of phone screen 1 (or 3 if there are more phones linked in the application). I don't need advanced connectivity, so any form of lan, or bluetooth...

    ₹8808 (Avg Bid)
    ₹8808 Avg Bid
    9 bids

    So I want an animated cat (can be any level of spiriting, can provide sprites) to run across phone screen 1. When hitting the right edge of phone screen 1, it comes out the left end of phone screen 2. When it hits the right end of phone screen 2, it comes out the left end of phone screen 1 (or 3 if there are more phones linked in the application). I don't need advanced conn...animated cat (can be any level of spiriting, can provide sprites) to run across phone screen 1. When hitting the right edge of phone screen 1, it comes out the left end of phone screen 2. When it hits the right end of phone screen 2, it comes out the left end of phone screen 1 (or 3 if there are more phones linked in the application). I don't need advanced connectivity, so any form of lan, or bluetooth...

    ₹8957 (Avg Bid)
    ₹8957 Avg Bid
    7 bids

    This is going to be a data logging App. It'll be able to connect with a car (through a Bluetooth dongle) and send all the necessary commands to the onboard control units to communicate with it and extract information in real-time. This information will be Simplified and displayed over the App in a predefined format. Some of the Apps similar to this (For example- carista, Torque pro etc.) are already available on the play store....you can check them out.

    ₹61432 (Avg Bid)
    ₹61432 Avg Bid
    5 bids

    Restaurant waiter robot Components: - A robot trolley up to 5 trays - Ultrasonic sensors - Motor (big stepper motor) - Infrared - Speaker - Button - Wifi / Bluetooth - LCD display - Lithium ion battery The robot need to follow the line drawn on the restaurant floor and move in one direction only. The shop worker will use a mobile phone to setup the shop layout with table numbers, charging station and pickup station. A simple console and report need to be shown in the App to indicate the battery percentage, distance travelled and tables served daily. The App can be used to instruct the robot to self charge at charging station. After shop worker enter the table number for each tray and press Go, the robot will follow the line and send the food to each table. When arrived at the tab...

    ₹43219 (Avg Bid)
    ₹43219 Avg Bid
    30 bids

    I want to create a Bluetooth speaker that can be connected to a mobile. Dial to +[Removed by Freelancer.com] for a detailed description

    ₹7987 (Avg Bid)
    ₹7987 Avg Bid
    3 bids

    I am facing a problem in connecting proximity sensor to Bluetooth headphone and sending sensor data to mobile. like I want that Bluetooth headset can connect to some sensor and within we can send sensor data through Bluetooth to the mobile app.

    ₹1045 (Avg Bid)
    ₹1045 Avg Bid
    3 bids

    Hi Bhavya Sai D., I noticed your profile and would like to offer you my project. We can discuss any details. I got these sensors sending measurment data on bluetooth BLL, and i need a gateway that can take these bluettooth data and send them wia the internet to an api server. Is that something you are into

    ₹18661 (Avg Bid)
    ₹18661 Avg Bid
    1 bids

    الاولية لمن يتحدث العربية محتاج مبرمج يشتغل على Java + flutter Swift + flutter لكي يعمل عملية وصل بين Bluetooth printer وبرنامج الflutter الوصل عن طريق Swift and Java not flutter الطبيق هو جاهز باقي عملية وصل الطابعة بلوتوث اجهزة الطابعة هي طابعة حرارية صغيره طابعة فواتير واجهزة سونمي v2 المكتبه الخاصة ب بأجهزة سونمي وهذي المكتبه الخاصة ب الطابعة الصغيره شكل الفاتوره في الصورة المرفقة

    ₹18885 (Avg Bid)
    ₹18885 Avg Bid
    6 bids

    I need code to print Arabic font by Bluetooth printer . Use only C# with Xamarin Forms.

    ₹12839 (Avg Bid)
    ₹12839 Avg Bid
    9 bids

    ...through SMS and use of a progressive web application instead of client having to download the mobile application.    Information security is of key importance and therefore the infrastructure should be exceptionally difficult to infiltrate.    All access rights will be predefined for set duration and all information captured will be sent to primary control center. Access will be granted through Bluetooth or NFC for now, however, other hardware compatibility such as biometrics and RFID should also be possible.  3 layers will be constructed for this program:• Top layer - Central command center will have access to all information and can control all access rights• Middle layer - Access to limited information defined by the ...

    ₹158468 (Avg Bid)
    ₹158468 Avg Bid
    17 bids

    I would like a simple project that contains the following modules: 1. Back Office (C#) a. Customer Register b. Item Register c. Cash Sales d. Order Registration e. Database Mysql 2. Android a. Order Registration b. Cash Sales c. Online/Offline Mode d. Should be able to Sync Items, Sales and Orders to the back office database when online ...project that contains the following modules: 1. Back Office (C#) a. Customer Register b. Item Register c. Cash Sales d. Order Registration e. Database Mysql 2. Android a. Order Registration b. Cash Sales c. Online/Offline Mode d. Should be able to Sync Items, Sales and Orders to the back office database when online e. Database Mysql f. Print to bluetooth p...

    ₹36725 (Avg Bid)
    ₹36725 Avg Bid
    17 bids

    ...playlists and favorites and synchronize it remotely using google/Facebook/apple Id/email with Firebase. Music player integrated with regular functions: • Play music, Next, Previous, Repeat, Play next automatically, show text or images corresponding to the hymn automatically, show current playlist playing. Music player can be used with the phone blocked, from the Music Control Center screen and by Bluetooth devices connected. Themes and colors available. (Night Mode, blue, pink, green, purple) Able to change the font size. Images and music files can be managed in one screen to be deleted/downloaded in group. Show ads (AdMob) Able to buy subscriptions to remove ads Please download the Android application and explore it, I'll require all the functions included there, it ...

    ₹201911 (Avg Bid)
    ₹201911 Avg Bid
    94 bids

    ...should be capable of being powered by typical usb from laptop or alternate power supply, but built using usb-c preferably. Input power should range from 5VDC to 30VDC or higher. Adjustable output voltage up to 30 VDC minimum with 16 bit resolution. Adjustable output current up to 2 amps minimum with 16 bit resolution. Preference is to have a socket for the Arduino (embedded Bluetooth and UART) or the ESP32 (embedded Bluetooth and UART) in the case of failure. Drawings, schematics, and GERBER files should be included as well as a bill of materials, along with two working prototypes. Bonus: it would be nice for battery powered, while charging from the same one usb input. Estimated battery life should be calculated for 24VDC at 20 ma load for a period of 8 hours . It would...

    ₹38740 (Avg Bid)
    ₹38740 Avg Bid
    19 bids

    need an android as figured bellow and when i press print button, it must show print dialog from this projects :// and when i press print button, it must show print dialog from this projects and if i press print by bluetooth, it should print content of detail can read here

    ₹17168 (Avg Bid)
    ₹17168 Avg Bid
    3 bids

    App requirements -Must communicate with Bluetooth devices to capture the local data, request can be single characters or hex codes -Programmable IO commands and URLs for Bluetooth and server/database communication -To capture and present the data from server in a selected graphical format -Master App or web based dashboard for user management -Email and SMS alerts -Login and password

    ₹25827 (Avg Bid)
    ₹25827 Avg Bid
    10 bids

    I need code to print Arabic font by Bluetooth printer . Use only C# with Xamarin Forms.

    ₹4479 (Avg Bid)
    ₹4479 Avg Bid
    2 bids

    Hi Stephan L., I noticed your profile and would like to offer you my project. Is this something for you. I got temperatur sensors running bluetooth BLE and I need a raspberry pi to collect the data and make it awaible via an api solution. The rest is already done. Is it something for you? The price we can talk about

    ₹746 (Avg Bid)
    ₹746 Avg Bid
    1 bids

    I want an app that once connected via Bluetooth passes WiFi network parameters to my accessory device and configure buttons on it. I have developed the app via Web but want to create an Android App to do it. I am attaching the instructions with the difference that instead to connect WiFi to the device I would be connecting via Bluetooth, then pass the config parameters of the WiFi network and other config.

    ₹32395 (Avg Bid)
    ₹32395 Avg Bid
    10 bids

    ...to detect a person and the temperature of that person - Power control - Sleep mode, low power modes, Active modes - 5V Fan control - low speed, medium speed, max speed - Additional Limit switch to be added - Bluetooth and ESP32 experience essential - 5V battery - USB-C charging and Firmware update capability - Experience with innovative and exciting light panels Project 2: - Experience with Peltier modules and power control to those modules - Independently control multiple fans - Low speed, medium speed, Max speed - Experience with Step up and step down voltage and power - Bluetooth and ESP32 experience essential - 11.1V power supply - battery life preservation essential We are looking for a very high quality electronics expert, a successful project will lead to additi...

    ₹108159 (Avg Bid)
    ₹108159 Avg Bid
    36 bids

    Write a bluetooth device locator, like AirTag, Tile, SmartTag, Chipolo. Code with Xcode 13, Swift 5. The app should run in the background even if the app is closed. Display a notification to the user if Bluetooth or location is turned off. Store each received Bluetooth frame in an array. When the Bluetooth scan finishes, send the table of received Bluetooth frames with the longitude and latitude of the current location of the IOS device to a TCP socket server. After server aknowledge empty the array. Use the startMonitoringSignificantLocationChanges () function to make it restart even after restarting the device.

    ₹8957 (Avg Bid)
    ₹8957 Avg Bid
    4 bids

    Top bluetooth Community Articles