Custom build pcb jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    10,316 custom build pcb jobs found, pricing in INR

    I have a working unit that a freelancer built for me in Aruduino (got a .ino file) and I built with the components list that the freelancer sent and the PCB that he planned (sent it to Seeed to print). It's about 90% tested but I have some issues that are code related that need to be fixed. I have attached the job description of the job of building

    ₹9774 (Avg Bid)
    ₹9774 Avg Bid
    10 bids

    We need a small PCB that has a Lithium ion battery Charge circuit that charges a 3.7 volt 180mah battery and also an RF 415 Mhz receiver circuit on one PCB. I would like the PCB to be 30 x 20 mm maximum in size. Is this possible? The board would need a micro USB port and on/off button on board.

    ₹29252 (Avg Bid)
    ₹29252 Avg Bid
    15 bids

    I have sketch board of special system. I need PCB design of this.

    ₹29740 (Avg Bid)
    ₹29740 Avg Bid
    28 bids

    Hi, I need one man who can help me install zuken CR5000 or CR8000 pcb layout to my computer.

    ₹1396 (Avg Bid)
    ₹1396 Avg Bid
    1 bids

    i am in need of someone to finish some prototypes for me. - a pic controlled optical tremolo distortion circuit (pic code all done, just need board layout which is part done, and a good layout to eliminate clock noise) -simple octave up and reverb circuit (layout done, but signal does not pass as should) - a simple two stage distortion circuit (layout done but gain is too large between stages) -a...

    ₹14784 (Avg Bid)
    ₹14784 Avg Bid
    21 bids

    To develop firmware for Following PCB (3 types -RTU,DTU,Repeaters). RTU PCB:- It has digital inputs & outputs & it should send data of inputs to remote(DTU- Data monitoring system in MODBUS RTU protocol & it communicates with DTU in wifi network. DTU PCB- It gets information from RTU & transmits the data to PC to which it is connected with ethernet

    ₹77006 (Avg Bid)
    ₹77006 Avg Bid
    12 bids

    To do a PCB schematic and layout design for a small foot-print PCB board for wireless module. PCB board contains USB, MCU, wireless chipset (IoT wireless chipset), antenna, and a number of connectors. Must have experience with antenna, RF, and USB impedance control, ground isolation and layers, and USIM and other connectors. CAD tool is EAGLE or Altium

    ₹22410 (Avg Bid)
    Featured NDA
    ₹22410 Avg Bid
    20 bids

    Engineering of Phone with PCB Details

    ₹5515 (Avg Bid)
    ₹5515 Avg Bid
    3 bids

    ...choose your liking also. 3) On front page, the logo, and company name - may be turned to white/khaki or any other color. 4) Use background/theme/or whatever as -- electronics/pcb tracks/technology/industrial. see the file [login to view URL] to understand what can u use. it is just my thought. u can use whatever u feel good wrt this theme. 5) keep the existing

    ₹8936 (Avg Bid)
    ₹8936 Avg Bid
    15 bids
    casing of pcb 5 days left

    We want to build plastic casing of our PCB board to hide wires and improve aesthetic design

    ₹412 / hr (Avg Bid)
    ₹412 / hr Avg Bid
    18 bids

    Design a PCB including Gerber and schematic. Led out puts 4 different type of LEDS Selectable by switch. Max current each led 1 amp Power source dual solar panel and 6v battery. Solar to charge battery. Current regulations for LED led supply 3.3 v 5 v supply output for mobile charging. Power input accept either solar or 12v 1 amp charger. Dimmer

    ₹1345 (Avg Bid)
    ₹1345 Avg Bid
    19 bids

    Research and Developments. Electronics Engineering. PCBs and SCH Designs. RF and Transmission Lines.

    ₹13404 (Avg Bid)
    ₹13404 Avg Bid
    29 bids

    We have a project ID: 17561761 We are working to create a mixer making machine in which pr...or powder in controlled way at a particular time per specified weight or measurement c. Shake mixer we have awarded for design and technical specification (schematic, PCB layour, PCB gerber) we need a mechanical engineer for prototype per specs and software.

    ₹49428 (Avg Bid)
    ₹49428 Avg Bid
    9 bids

    Designing and Developing the PCB for Battery operated and Bluetooth connected Drums Sticks, which when connected to Smartphone, creates music on the Mobile Music App. Drumsticks replace your figure from the Music App and create music when played on any surface.

    ₹20246 (Avg Bid)
    ₹20246 Avg Bid
    26 bids
    PCB CAD LAYout 3 days left

    I need to get the layout done for my PCB. Schematics has already been drawn for the same in OrCAD.

    ₹6227 (Avg Bid)
    ₹6227 Avg Bid
    32 bids

    This project has 3 part, PCB Hardware,Firmware inside that and Enclosure. Firmware should have these capability : * scan for BLE tags * gather their list * do some calculation on gathered list * send them by HTTP/Json to our server * also send device info to two server every 30 seconds. * easy to configure * connect to wireless networks easily

    ₹309899 (Avg Bid)
    ₹309899 Avg Bid
    45 bids

    communication between delta vfd and pc

    ₹8046 (Avg Bid)
    ₹8046 Avg Bid
    10 bids

    PCB as discussed by chat

    ₹3491 (Avg Bid)
    ₹3491 Avg Bid
    1 bids

    The PCB project is equipped with PIC16C622A and 24LC16BI-SN including the TD5200 radio receiver. A new code is required to decode and store RKE from different manufacturers for four output channels.

    ₹35256 (Avg Bid)
    ₹35256 Avg Bid
    5 bids

    We are looking for person who can Select Proper components, Design Block diagram, Design Schematic and Design PCB based on our requirement.

    ₹23036 (Avg Bid)
    ₹23036 Avg Bid
    56 bids
    Tempo Velocity 1 day left
    VERIFIED

    Need an electronics engineer to design an encoder based rotary velocity transducer. The objective of this project is to arrive at a design that will produce an analo...with quadrature output. To successfully do this project you will need to be familiar with quadrature digital encoders, microprocessors, electronic part specifications, and PCB layout.

    ₹93898 (Avg Bid)
    ₹93898 Avg Bid
    28 bids

    ...frequencys/signal processing/upconvert and down convert a signal/amplify a signal/relay a signal/LF & UHF/modulate & Demodulate signals/ sniff signals/ Micro controllers Electronics PCB layout RFID Rasberry pi zigbee RF CIRCUIT You should have SDR tools, to be able to check for signals etc.. IF YOU DO NOT MEET THESE REQUIRMENTS DO NOT WASTE YOUR TIME OR MINE

    ₹175998 (Avg Bid)
    ₹175998 Avg Bid
    18 bids
    PCB design 1 day left

    I am looking for PCB designer.

    ₹29391 (Avg Bid)
    ₹29391 Avg Bid
    77 bids

    Attach PDF files for projects SOWI and FLOWI. First we need a waterproof ultrasonic sensor to detect trees. Second, design a PCB BASE with wifi, inputs, ouputs, … for SOWI and FLOWI. Third, design APP for: -One SOWI. -FLOWI. -Two SOWI (SOWI+). We start with an small project (SOWI wired) but we will add more work with Android APPs.

    ₹49703 (Avg Bid)
    ₹49703 Avg Bid
    14 bids
    PCB designer 1 day left

    Hii, All I want a PCB designer.

    ₹8607 (Avg Bid)
    ₹8607 Avg Bid
    44 bids

    Expert PCB and Schematic designer for simple reference based complete Altium Project with 3D bodies/ component libraries and output files for production

    ₹14102 (Avg Bid)
    ₹14102 Avg Bid
    42 bids

    need an engineer to lay out a PCB track, preferably in Altium Designer. There are 2 tracks that need to be layout out on a PCB. The tracks MUST have a specific impedance, and MUST have a specific power handling. Please only bid on this project if you know how to calculate PCB track impedances AND temperature rise of a PCB track with a certain current

    ₹11449 (Avg Bid)
    ₹11449 Avg Bid
    11 bids

    Need someone to design PCB... I have a lot of schematics that need to be worked on anyone willing to process the same... PCB manufacturing will be an added advantage...but not mandatory "The below-added image file is just sample, not the actual design..."

    ₹4782 (Avg Bid)
    ₹4782 Avg Bid
    31 bids

    i will share via chatting detail.

    ₹2025 (Avg Bid)
    ₹2025 Avg Bid
    35 bids

    I need help to figure the PCB board schematics and write a demo graphic project to prove that the schematic is correct.

    ₹2443 (Avg Bid)
    ₹2443 Avg Bid
    1 bids

    Looink for an experienced Electrical Engineer for an LED Project. You will build an LED light driver from scratch. I will provide you the making reference videos of the product. The PCB driver is about combining (DC-DC 10-32V To 12-35V 150W Boost Adjust Module + DC-DC Adjustable Step Down Module Power Supply Converter + Battery protection Circute)

    ₹12010 (Avg Bid)
    ₹12010 Avg Bid
    27 bids

    I have designed an RF/hardwired button controller that integrates an existing hardwire button controller interface with an RF button interface. The integration sends to a PC, via USB, what button is presently pressed (closed) and open. I have already hand-built 10 of these and am now seeking design/mfg facilities that could produce such en masse.

    ₹10262 (Avg Bid)
    ₹10262 Avg Bid
    23 bids

    Project requires : 1- remote monitoring and control of raspberry pi (via Wifi) to: Monitor 0-265 V AC c...raspberry pi (via Wifi) to: Monitor 0-265 V AC current, and voltage using raspberry pi zero W. An android App to show voltage and current, disconnect output . Circuit and PCB design (preferably with Altium) and also raspberry pi skill is a must.

    ₹43005 (Avg Bid)
    ₹43005 Avg Bid
    28 bids

    I need someone who can design a PCB + complete 3D view for a given schematic

    ₹1676 (Avg Bid)
    ₹1676 Avg Bid
    6 bids

    I have an almost completed schematics in pdf format, I want you to help to complete it and draw the schematics and PCB layout in Eagle or Altium format. Have to include BOM. The components selected should be able to buy in common spot-buy market (such as digit-key, arrow, mouser)

    ₹11868 (Avg Bid)
    ₹11868 Avg Bid
    20 bids

    -Design an Orcad PCB for a 4 layer PR4 board with appro dimension as 2.5"x7", including generation of gerber and manufacturing documentation. -Convert allegro formatted netlist schematic to an Orcad PCB format netlist schematic -Provide 4 hours of online training and knowledge transfer to our inhouse engineers -Provide a short video for training

    ₹40073 (Avg Bid)
    ₹40073 Avg Bid
    29 bids

    We have urgent requirement PCB Designer for our one of project.

    ₹1466 (Avg Bid)
    ₹1466 Avg Bid
    31 bids

    We have urgent requirement PCB Designer for our one of project.

    ₹1117 (Avg Bid)
    ₹1117 Avg Bid
    18 bids

    We are working to create a mixer ma...weight or measurement c. Shake mixer FIrst We need complete design requirement with technical specification like Writing Technical specification, procurement, schematic, PCB layour, PCB gerber, fabrication, prototype building, testing. We will open a second project for software writing and third for prototyping.

    ₹12636 (Avg Bid)
    ₹12636 Avg Bid
    17 bids

    Hi loi09dt1, I noticed your profile and would like to offer you my project. We can discuss any details over chat. Got a project require some changes to PCB board, but I am not sure how to do.

    ₹4538 (Avg Bid)
    ₹4538 Avg Bid
    1 bids

    I want a pcb design for a device. I'm using 2 sample board. I would like to combine them in one PCB. I don't want a new device and design just want to combine them together. Everything is ready, (the connections, altium and eagle files) End of the job, I want a Gerber file and Eagle or Altium file of project.

    ₹8936 (Avg Bid)
    ₹8936 Avg Bid
    74 bids

    I need 4 pcbs made in altium from an eagle brd file and add 4 leds to the 5th pcb that is already in altium format. I can provide the schematic for all. I also need the pcb that is already in altium format to have vias added for pins that I can connect 4 leds to. 1 of the pcbs in eagle file is just a dxf shape. that one will need traces added

    ₹34348 (Avg Bid)
    ₹34348 Avg Bid
    40 bids

    Need an Expert for simple 12mm by 12 mm PCB with single C port and PD IC Complete project will include modified schematic based on reference design, full production Altium files and 3D files as well as all libraries of components Ultra Compact 4 Layer PCB with component selection to make sure its the smallest possible footprint

    ₹12217 (Avg Bid)
    ₹12217 Avg Bid
    55 bids

    ...help: - Help me move part on new plane (into casing) [blue in sketch]. - Help create cutouts for display and buttons [yellow in sketch] - Help me adjust height ofspacers so PCB is properly fit in case. - Help me create back side of case. Billed by the hour, [Removed for encouraging offsite communication which is against our Terms and Conditions -Section

    ₹1047 / hr (Avg Bid)
    ₹1047 / hr Avg Bid
    18 bids

    want a P.C.B design for home automation project which have Node MCU,Relays n power in one P.C.B with their base

    ₹7889 (Avg Bid)
    ₹7889 Avg Bid
    51 bids

    I requi...flashing function. I require the components to consume as minimal power as possible, this is essential to my design success. I don't have all the exact specification for the PCB layout as yet however I think we may be able start on the schematic. I do have some questions ask initially to ensure the concept I have in mind is possible. Dean

    ₹25482 (Avg Bid)
    ₹25482 Avg Bid
    31 bids

    ...requirements on shape and size. The receiver will need to able to have a 'learning function' button to add 1 or multiple receivers. I don't have all the exact specification for the PCB layout as yet however I think we may be able start on the schematic. I do have some questions to ask you to ensure the concept I have in mind is possible. Hope this project

    ₹360 / hr (Avg Bid)
    ₹360 / hr Avg Bid
    1 bids

    We require a housing design for a LED light up module for a cosplay T-shirt, the piece will contain a simple PCB, LED's in a pattern, batteries and on/off switch. We require a CAD design for the Module housing The housing can be modified from a previous sample that was made some time ago or designed from scratch. the housing will require a battery

    ₹10193 (Avg Bid)
    ₹10193 Avg Bid
    5 bids

    ...able to bring both signals from DACs to oscilloscope to see Lissajous patterns. Project can be done on the STM Discovery board, but the delivered solution should work on my PCB with STM32F745. I should be able to compile the delivered source code in Keil uVision V5.24.2.0. Freelancers with experience in STM32F7 FFT and Hilbert please place your bets

    ₹43144 (Avg Bid)
    NDA
    ₹43144 Avg Bid
    3 bids

    Design a PCB per the attached schematic. Prefer to use Eagle for the design. Design Assumptions: 1. 120VAC design 2. 5A circuit rating for all circuit traces 3. Prefer Phoenix Contact parts for terminal blocks 4. L, N, G are all 12AWG connections 5. SW1, SW2, S1, S2 are #18 AWG Deliverables: 1. Circuit board design 2. Bill of Material for selected

    ₹1815 (Avg Bid)
    ₹1815 Avg Bid
    5 bids