Flash create video controller jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    2,939 flash create video controller jobs found, pricing in INR

    I have a Software Defined Networking (SDN) project, and I need to create a web page which takes an IP address from textbox in the web page then send it with the protocol and the exit interface to the Ryu controller ( the SDN server controller ) which is using a Linux operating system by using CURL command like the attachment, then show the routing table

    ₹7145 (Avg Bid)
    ₹7145 Avg Bid
    4 bids

    Looking for the "IR" code of the remote controller for the 10" Digital Photo Frame "EARME". Attached the photo frame and remote controller pictures for reference. I have the "Down" key IR code for the remote controller, for reference: This is "Down" key IR code it use, "0000 006D 0022 0002 0159 00AD 0016 0016 0016 0016 0016 0...

    ₹565 - ₹1694
    ₹565 - ₹1694
    0 bids

    I would like to have a wireless custom wearable DJ Controller built. and want to know how much that would cost? some of the specs are that it allows for scratching, hot cues, has a vocoder and talkbox vocal effect, etc. I want it to be light and portable. Similar to how guitarists wear a guitar strap except this is like a vest that can be put on.

    ₹272986 (Avg Bid)
    ₹272986 Avg Bid
    8 bids

    I I'm developing a unity game, I'm which the existing character controller is only for blocky characters. I need your help to change the character controller in game for humanoid characters. I also have third person character controller plugin for this. Need your assistance to replace it in game. The game is multiplayer using unity u net service.

    ₹1729 (Avg Bid)
    ₹1729 Avg Bid
    11 bids

    [login to view URL] pi work with load cell and HX711. [login to view URL] weight value on RPI and get realtime value from load cell. Trigger each relay output for each trigger value. [login to view URL] with HDMI : Realtime value, set weight(5 value for 5 relay output)

    ₹13197 (Avg Bid)
    ₹13197 Avg Bid
    23 bids

    Wireless LAN Controller is mostly configured but APs not getting IP from router WLC configured with 4 VLANS -- VLAN20 is for VOIP, on the LAN not wireless -- VLAN30 1st SSID -- VLAN40 2nd SSID -- VLAN50 3rd SSID 2 Cisco 3502i Aironet Access Points already in LW/CAPWAP mode

    ₹1969 (Avg Bid)
    ₹1969 Avg Bid
    10 bids

    Hi, I need to make a character controller like Limbo in a short time. With the same physics and with gearing (grabbing) on the edges of the platform, and with a rope.

    ₹17937 (Avg Bid)
    ₹17937 Avg Bid
    23 bids

    Get email leads from UK AND Luxembourg, Malta, from Those are the industry needed Boat and plane sellers People that work in that field aviation field. Flying boat aircraft Boating & Aviation Aviation Luxembourg Yachthub Horse sellers Horse rank Industrial Equipment supplier Industrials Consumer goods Consumer services Investment management company Funding business company Construction com...

    ₹24717 (Avg Bid)
    ₹24717 Avg Bid
    29 bids

    i WANT A TOTAL VERIFY LEADS FROM DIFFERENT INDUSTRY LIKE: Boat and Aircraft sellers People that work in that field. Flying boat aircraft Boating & Aviation Aviation Luxembourg Yachthub Horse sellers Horse rank Industrial Equipment supplier Industrials Consumer goods Consumer services Investment management company Funding business company Construction company Oil company Vessel Petroleum i...

    ₹71017 (Avg Bid)
    ₹71017 Avg Bid
    20 bids

    require a professional which can simulate a Fuzzy Logic Controller system on the matlab

    ₹11593 (Avg Bid)
    ₹11593 Avg Bid
    22 bids

    ...projects. Needed Information: Emails and Tiles and Company Revenues Email entry per company should be at least 2 to 3 Top Decision makers such as: Managing directors Directors Controller VP President Owner Chief Executive Officer CFO I am giving out First project for 5000 data entry for United Kingdom Oil Companies. There Revenues should be more than USD

    ₹30113 (Avg Bid)
    ₹30113 Avg Bid
    35 bids

    Hi, I need to create a Domain controller machine and another machines where I'll built my application. We've already the 2 machines etc. But we can't connect the machine application to the domain controller. I need to fix this or maybe use Microsoft Ad from aws. (the only thing is that we do not have much users: 2. So AD is much expensive than a micro

    ₹31863 (Avg Bid)
    ₹31863 Avg Bid
    32 bids

    Hi, I need to create a Domain controller machine and another machines where I'll built my application. We've the 2 machines etc. But we can't connect the machine application to the domain controller. I need to fix this or maybe use Microsoft Ad from aws. (the only thing is that we do not have much users: 2. So AD is much expensive than a micro instance

    ₹682 - ₹2559
    ₹682 - ₹2559
    0 bids

    ...control to pan levels left or right. Between 2 channels. Must be able to select which channels are panning relative to each other. Save settings to USB or SD card. Must display/create a unique file reference for each session and (at the least) display it so that the engineer can note it for later reference/recall. VU meters displayed. For selected bank

    ₹192344 (Avg Bid)
    ₹192344 Avg Bid
    12 bids

    Hi I need an expert to help me to model and simulate a defined controller in islanded microgrid in Matlab.

    ₹7583 (Avg Bid)
    ₹7583 Avg Bid
    7 bids

    ...understands robot control, and how to implement a controller so that according to data from the camera, the robot will take this and be able to adjust it's course. Essentially I want to create a closed loop feedback system between the camera and robot. I believe this is why we need a PID controller? I'm not actually sure how to do this. I use PROS

    ₹2042 / hr (Avg Bid)
    ₹2042 / hr Avg Bid
    16 bids

    I have the vlans built the Firewall configured but the Vlans will not get an IP address.

    ₹802 / hr (Avg Bid)
    ₹802 / hr Avg Bid
    2 bids

    An up- and down- counting stopwatch with an LED matrix display has just a few other small features. The software for it has to be written in a month. Please find the details in the attached pdf document. Please read the pdf document carefully and ask, if anything is unclear. Thank you!

    ₹13708 (Avg Bid)
    ₹13708 Avg Bid
    24 bids

    use a simple topology to start the scenario. Build floodlight controller using Mininet. Then, create simple rules to apply: 1. ACL 2. Rate limit of the bandwidth. apply it between any two hosts in the topology. it is simple project, i need to see the methods that you are using to apply the ACL and Rate limit of the bandwidth.

    ₹3719 (Avg Bid)
    ₹3719 Avg Bid
    2 bids

    use a simple topology to start the scenario. Build floodlight controller using Mininet. Then, create simple rules to apply: 1. ACL 2. Rate limit of the bandwidth. apply it between any two hosts in the topology. it is simple project, i need to see the methods that you are using to apply the ACL and Rate limit of the bandwidth.

    ₹9916 (Avg Bid)
    ₹9916 Avg Bid
    5 bids

    Need to configure Aruba Wireless Controller to work with hotspot server (AAA server). You can train us if you have an Aruba controller with you (OR) you need to wait for a week to have access to aruba-controller at our customer end.

    ₹6416 (Avg Bid)
    ₹6416 Avg Bid
    5 bids

    A CISCO Wireless LAN controller with about 10 wireless access point needs to be configured from scratch. This is a straightforward configuration. No complicated setup. It should not take more than 1 to 2 hours The successful bidder will need to: 1. Dial in remotely to a PC and install whatever software is needed to access and configure the wireless

    ₹7145 (Avg Bid)
    ₹7145 Avg Bid
    30 bids

    Hi all, I'm working on an ARM assembly source code for a controller: STM32F103RB. The controller itself is available in a devolopment board, this one: [login to view URL] I'm trying to get up and running two separate peripherals: PWM ad USART, but they doesn't ! And I don't know why. I'm looking for an assembly

    ₹7218 (Avg Bid)
    ₹7218 Avg Bid
    7 bids

    I have Windows 2008R2 Domain controller VM that I want to move to a new physical server with fresh windows 2008R2 installed. It has to be done the way that the IP remains the same, and domain member computers won't need to be re-added to the domain ( After all done, old domain controller goes down, the new one comes up and nothing else needs to be done

    ₹5031 (Avg Bid)
    ₹5031 Avg Bid
    39 bids
    ₹1823 Avg Bid
    7 bids

    I need a responsive website. I would like it designed and built.

    ₹51185 (Avg Bid)
    ₹51185 Avg Bid
    11 bids

    I need some help with finding an experienced financial controller, or comptroller, to undertake all aspects of financial management, including corporate accounting, regulatory and financial reporting, budget and forecasts preparation, as well as development of internal control policies and procedures.

    ₹2917 / hr (Avg Bid)
    ₹2917 / hr Avg Bid
    35 bids

    I recently developed a microcontroller-based lighting controller for an art project with a local artist. It controls 3 x 3-colour LED strips. I also wrote a PC program in JAVA to define how the lights change/fade over time. The PC program has a similar UI to Audacity in that there is a timeline to represent each of the channels (the LED strips).

    ₹119140 (Avg Bid)
    ₹119140 Avg Bid
    22 bids

    I have 28 relays for 28 valves , 2 relays for three phase starter, 1 relay for single phase motor. all system operated using sms through android application.

    ₹15784 (Avg Bid)
    ₹15784 Avg Bid
    24 bids

    Hello, I tried to use nodejs (express) along with swagger (swagger-ui-express). However, I don't success to use my [login to view URL] to display most simple response. All I need is a code, which return "hello world" some api. Just for you to understand: "/person" just need to go to relevant javascript code and return "hello world"

    ₹9843 (Avg Bid)
    ₹9843 Avg Bid
    8 bids

    Hi, I build replacement parts for the older generation Amiga computers originally built by Commodore. I have recreated the Amiga 500 keyboard and want to replace the old controller(Commodore CSG 6570-036 MCU with a newer PIC chip) using a PIC18F45K50T-I/PT microcontroller as a replacement and hopefully be able to incorporate the extra logic circuit

    ₹6089 (Avg Bid)
    ₹6089 Avg Bid
    6 bids

    Needed to write a java controller to call an restful web service and map the response. Need to connect remotely and work on my machine

    ₹2844 (Avg Bid)
    ₹2844 Avg Bid
    27 bids

    we need a code in C, it should be written in Keil compiler with STM32 microcontroller and CMSIS libraries. sample devices for this purpose are JUMO ITRON seies in industry.

    ₹166314 (Avg Bid)
    ₹166314 Avg Bid
    31 bids

    I need to build a demo of a high speed calculation on Raspberry Pi 3. I need to calculate a simple set of equations every 10ms. In parallel, I would like to chart the results on a slower basis (updating say 5 times/second). I would like to use an environment like qt or similar for the GUI and charting. I would like to start with advice on the best way to proceed. Additional programming devel...

    ₹2698 / hr (Avg Bid)
    ₹2698 / hr Avg Bid
    17 bids

    We need to control a stepper motor with a simple logic algorithm depending on the reading of two analog pressure sensors.

    ₹36092 (Avg Bid)
    ₹36092 Avg Bid
    39 bids

    I will like to control the pressure in an Autoclave with 2 solenoid valves ( in and out) to keep pressure at a desired value, with an lcd to display pressure and desire pressure, with a stop, start and empty option, but the main is to keep pressure between 5 psi of the desired pressure, I use a pressure sensor and 2 solenoid valves. I could design the circuit I’m looking for some SB to devel...

    ₹11958 (Avg Bid)
    ₹11958 Avg Bid
    42 bids

    I have a server that we are currently using for running quickbooks. I will have a new user in the office with a new computer., I need this computer properly connected to the server, so they are able to utilize quick books and any other functions properly.

    ₹6781 (Avg Bid)
    ₹6781 Avg Bid
    53 bids

    Need to update firmware over the air for STM32F030C8 controller using GPRS . GPRS module used quectel MC60

    ₹26905 (Avg Bid)
    ₹26905 Avg Bid
    5 bids

    I am looking for some one to build flight controller software for my stm32f4 board that I have developed

    ₹8239 (Avg Bid)
    ₹8239 Avg Bid
    3 bids

    I want to learn how to assemble quadcopter from ready parts which I have. I have problem with setting up of Ardupilot.

    ₹583 / hr (Avg Bid)
    ₹583 / hr Avg Bid
    6 bids

    Looking for an intermediate or experienced electrical engineer who wants to help design and create a novel car accessory. A good candidate will have experience with micro controllers and their programming; high-power switching, regulating, and PWM; sensor integration, and Bluetooth (BLE) implementation to communicate with a yet-to-be created iOS/Android

    ₹39300 (Avg Bid)
    ₹39300 Avg Bid
    39 bids

    Hi I am looking for an embedded Software Programmer for ECU Project, Whose having strong knowledge on 32 bit controller programming with automotive experience. Protocols: SPI, CAN (Must) Device drivers: ADC , DAC, PWM Should have good understanding about electronics hardware. Duration of the project: 45 Days to 60 Days Deliverable : Complete

    ₹109734 (Avg Bid)
    ₹109734 Avg Bid
    26 bids

    Have a scene that display, but needs another component with Tabbed Scenes to be added. Each with new thread/call. You should know JAVA/FX well. This is a Desktop application.

    ₹3864 (Avg Bid)
    ₹3864 Avg Bid
    7 bids

    I'm building a 3 axis camera motion slider and I need someone who can modify an existing sketch to suit different outputs and also add PS3 bluetooth control using the PS3BT.h library and the AccelStepper.h / MultiStepper.h libraries. This should be a pretty simple job for someone with the right skills as most of the sketch already exists.

    ₹2333 (Avg Bid)
    ₹2333 Avg Bid
    2 bids

    I modified my SQL database and had the website PHP re-written using an MVC architectural pattern. I have a mobile app that needs to be updated since the database table has changed. I need the mobile app called routine and the mobile app "get-data" routine updated. I have a file that includes the following. 1. Unload of database table - you have the structure and data for a small table (3...

    ₹18739 (Avg Bid)
    ₹18739 Avg Bid
    17 bids

    I am from Industrial Automation Engineer. We need a report format in excel format which is directly generated from PLC(programming Logic Controller) to EXCEL. This is customized report i.e. We insert date and time then it's showing this inserting data in excel.

    ₹9770 (Avg Bid)
    ₹9770 Avg Bid
    12 bids

    Gas gauge load cell based 3 inch display Mobile application for same. REGARDS Girish [Removed for encouraging offsite communication which is against our Terms and Conditions -Section 13:Communication With Other Users]

    ₹2479 (Avg Bid)
    ₹2479 Avg Bid
    15 bids

    I'm looking for someone can help me model and fullly rig (facial expression,etc.) a Baby (unlike any other 3D baby on the market) in C4D for me. If you can do it, please let me know.

    ₹21145 (Avg Bid)
    ₹21145 Avg Bid
    10 bids

    On farm roller mill controller monitoring 8 RPM inputs, 2 temperature input, fan switch, 12v shutdown solenoid, linear actuator and 2 240v auger motors.

    ₹1531 / hr (Avg Bid)
    ₹1531 / hr Avg Bid
    28 bids