Plc scada profibus vfd jobs
I’m building a brand-new automation system to run a production-packaging machine and need a specialist who can take the job from blank page to startup. The focus is on complete PLC logic and a matching SCADA/HMI layer—everything must work seamlessly together before we roll the first unit off the line. What I expect you to handle • System architecture and I/O list for the machine • PLC programming with clear, well-commented logic • SCADA or HMI screens that mirror real-time status, alarms, and basic reporting • Simulation or bench testing before site work • Remote assistance during commissioning and fine-tuning Tools and platforms are flexible; bring the brand or software you know best. If you have proven success wit...
Hi Yahya, will this work?
We are seeking an experienced Automation & Electrical Control Engineer for ongoing, recurring elevator projects (starting with our first unit). Scope includes: 1. PLC programming (Xinje, Inovance, or Delta) and VFD parameter setup, delivering unlocked source code with English comments and a complete I/O mapping list. 2. Editable AutoCAD Electrical or EPLAN schematics, power/control wiring diagrams, safety circuit design, and Bill of Materials (BOM). 3. Live video simulation check before final payment. The final price is open to negotiation per elevator unit.
... Once the network is set, PLC logic and microcontroller firmware must be written, fully tested, and commented. Typical tasks include managing pump speed, regulating flow rate, synchronising nozzle actuation with robot motion, and reading safety-critical sensors (pressure, temperature, level). Closed-loop PID control for flow consistency is essential. Hardware support is also required. I need a bill of materials covering drives, I/O modules, valves, sensors, and any gateway hardware, followed by purchase specifications and datasheets. If cost-effective off-the-shelf boards are preferable to custom PCBs, outline that path; otherwise provide basic schematics for a custom design. Deliverables • System architecture diagram with chosen protocol highlighted • PLC...
...valves. Every piece should close out a mass- and energy-balance so the numbers reconcile. Because the plant will run largely unattended, a high-level PLC/SCADA narrative is also required. Describe temperature control loops, pH and pressure interlocks, emergency shutdown logic, and the commissioning sequence needed to start the biology safely the first time. Deliverables (all native files plus PDFs): • Block flow diagram, PFD, heat & material balance • P&IDs with annotated equipment and instrument tags • Equipment sizing calculations and datasheets • Gas upgrading package sizing and vendor recommendations • Control philosophy and PLC/SCADA I/O list • Commissioning and biological start-up plan Drawings can be...
...map Modbus registers to MQTT topics without vendor lock-in. • Throughput suitable for typical controller polling rates (please indicate benchmarked values). • Clear documentation covering installation, network segregation, and recovery procedures, plus sample configs for common brokers such as Mosquitto and HiveMQ. Acceptance will be based on a lab demo: I will feed live Modbus traffic from a PLC, observe that frames cross the diode only in the permitted direction, and verify that the same values appear as MQTT messages on the IT broker with no packet leakage the other way....
...6 machines waarbij een aantal temperaturen moeten worden gelogd en weergegeven. Jouw opdracht is om de volledige verbinding op te zetten en te documenteren: * Adviseer wat er nodig is om de verschillende PLC's in een netwerk te krijgen welke toegankelijk is voor de Fuxa server. * Configureer de S7-driver van FUXA voor elke PLC (inclusief de juiste rack/slot-instellingen, verbindingstype, polling-frequentie, enz.). * Koppel de relevante tags (ongeveer 30–40 per PLC; de lijst hiervoor lever ik aan). * Ontwerp overzichtelijke, responsieve schermen die actuele waarden, statusindicatoren en de verbindingsstatus van elke controller tonen. * Verwerk alles in mijn bestaande Docker-omgeving en lever het bijgewerkte 'compose'-bestand, het JSON-bestand va...
Fully Remote | Contract | $8/hr We're looking for an Electrical Engineer with 3+ years of industrial experience to handle electrical design and documentation for engineered equipment and systems. What You'll Do - Create and review single-line diagrams, load lists, schematics, and wiring diagrams in AutoCAD Electrical. - Select and integrate motors, heaters, instruments, and PLC hardware. - Review vendor drawings and specifications against project requirements and NEC/IEC standards. - Work with vendors, customers, and internal teams on deliverables and schedules. - Provide remote technical support during fabrication, installation, and startup. Must Have - BS in Electrical Engineering or a related field. - 3+ years of industrial electrical engineering experience. - Stro...
...chilling unit by adding a dedicated monitoring and alarm package in the Mitsubishi PLC. The refrigeration sequence itself is running well; what is missing is a robust set of alarms and automatic shutdown logic that will trip instantly on critical conditions and log everything for later analysis. Key alarm blocks that must be implemented and fully tested are: • Ammonia leak, pressure, and temperature alarms • Pump, compressor, and fan fault alarms • Emergency shutdown and automatic safety shutdown I am using a Mitsubishi platform (GX Works2/3 ‑ iQ-F series) so please be comfortable working with MELSOFT tools, ladder or structured text, and the built-in safety relays. Deliverables I expect include the commented PLC program, an address & tag list,...
I need a SCADA system built with Tatsoft to monitor and control PLCs and factory machines. Key functionalities include: - Monitoring: Operators should be able to view machine status and live values. - Control: Start, stop, and change machine settings directly from the SCADA screens. - Alarms: Receive and acknowledge alarms. Ideal skills and experience: - Proficiency in Tatsoft SCADA development - Experience with PLCs and factory machinery - Strong background in industrial automation and control systems - Ability to design user-friendly, intuitive dashboards
We’re building a SCADA application in Ignition (Inductive Automation, Perspective module) to replace a legacy HMI on an industrial process system, and we need an experienced Ignition developer to help carry it across the finish line. Current status: 40 of 65 operator screens are built. We need the remaining 25 screens completed, plus several platform features finished off. Scope of work: Complete ~25 remaining Perspective screens — consistent with the design and layout of the 40 already built. Finish tag binding on some existing screens where bindings are still incomplete (working from a provided tag list). User management — role-based access control, login, user roles/permissions. Audit trail — logging of operator actions and parameter changes (who / what...
...agreements and offer letters, merger and acquisition files, personal financial information, project documents, quotation, software product development files, source code, statement of work, strategic planning documents, tax documents, wire transfer. • P1: actuary reports, asset management, business context, completion certificates, compliance policies, construction specifications, control system and SCADA files, credit report, employee pension records, employee stocks and bond records, employment agreement, enterprise risk management, environmental permits, facility permits, factory incident reports, finance policies, financial audit, financial statement, freight documents, garnishment, gifts and entertainment, IT infrastructure and network security documents, information te...
I need a new Click PLC program developed from the ground up for a machine that used 10 sensors approximately and eight outputs. It uses click PLCs from automation direct. Must be willing to do a screen share, and a phone call or audio call
Starting with the control equipment: good quality Chinese servo and drives as well as PLC. Documentation available on line and in English. Create a complete UI per attached documents Program the robotic arm to perform per the created UI THIS IS A ROBOTIC CHALLANGE. I will only accept offers from programmers who are very familiar with any robotic operating system (like ROS2) and has a number of years experience with it.
I am ready to launch my clothing line, Shuvo PLC, and I need a logo that instantly signals luxury and elegance. The palette is set: rich black paired with refined gold. I would like the full name “Shuvo PLC” to appear in the design, supported by a stylish monogram that can stand on its own for smaller applications such as garment tags, zipper pulls, and social-media icons. The overall feel should mirror high-end fashion houses—clean lines, balanced spacing, and a sense of understated opulence rather than flashy ornamentation. This mark will live on woven labels, packaging, and our upcoming ecommerce site, so it must reproduce beautifully at both large and very small sizes. When delivering, please include: • The primary logo with the black-and-go...
...of motor of rails that keeps stopping mid-cycle, tripping protection devices and throwing alarms. I need a technician who can come on site, trace the exact failure point, carry out the repair, and prove the machine can run a full shift without further trips. What you’ll actually do • Inspect and test the machine in person, using whatever diagnostic tools you normally bring (multimeter, scope, PLC laptop, etc.). • Isolate the component or wiring fault that is causing the repeated stopping/tripping. • Repair or replace the faulty part right away when possible, or specify the parts I should source locally if they have a lead time. • Reset any alarms, verify safety interlocks, and fine-tune settings so the machine operates normally. • Provide...
I need a Siemens-based control program that will run fully automatic temperature-and-humidity test cycles in a cascade chamber. The core logic must handle ramp, soak, and dwell sequences accurately, driving the chamber’s cooling, heating, humidification, and de-humidification elements while maintaining tight tolerances. The HMI (WinCC Comfort or Advanced) has to let an operator: • start or stop the current cycle and follow real-time values; • create, edit, and save custom temperature-humidity “recipes”; • see active alarms and download historical data or PDF/CSV reports directly to USB or the plant network. I will provide the P & ID, I/O list, and existing electrical drawings. You will deliver the TIA Portal project file, HMI runtime files, and ...
I need a complete program for the XGK-CPUH PLC. The PLC will control a pump and tank system. The programmer should ideally have experience with: - XGK-CPUH PLC programming - Pump and tank control systems - Automation and control logic
...Work Specification & Scope of Work Project Title: Automation, PLC Logic Programming, and HMI Screen Development for -70°C Cascade Cooling Environmental Test Chamber 1. System Overview & Hardware Architecture The supplier/programmer is required to develop, test, and commission the complete automation logic and HMI interface for a specialized -70°C multi-stage cascade refrigeration environmental test chamber. PLC Hardware: Delta DVP-16SS2 main CPU, DVP08SN (SN08) digital output expansion module, DVP04AD-S analog input module, and DVP04PT-S RTD temperature input module. HMI Hardware: Flexem 7000 Series HMI (FE7000 / FE7300) communicating via RS-485 Modbus RTU (COM1 port, 9600 baud, 7 data bits, Even parity, 1 stop bit). 2. Scope of PLC Programming (...
...ease of maintenance; changeovers between sizes should be tool-free or require only quick-change tooling. If you have experience with cam-driven benders, servo-based CNC wire forming, or hybrid approaches, let me know which architecture you would adopt and why. Please include in your proposal: • 3D CAD assemblies and detailed part drawings suitable for fabrication • Motion/control schematic (PLC or dedicated motion controller) with suggested sensor and actuator list • Bill of materials with manufacturer part numbers and estimated costs • Cycle-time estimate for the smallest and largest clip sizes • A brief note on safety guarding and CE/UL considerations if relevant I will review concepts based on mechanical soundness, projected throughput, an...
I’m putting an Omron NA-series HMI on a new line and I’d like you to create the complete project file in Sysmac Studio. The panel will be linked to a single Omron PLC and must cover the following operator functions: • Show machine status and alarms • Let operators control machine settings Alarm History and data logs Trending and recipe manager • Show production data and reports I already have the PLC tag list and alarm table exported from CX Programmer ( CJ2M PLC); you can import these directly. also can provide old project with NS HMI and required the similar features in new style and arrangements. The screens should follow Omron’s standard navigation style, use clear colour coding for alarm states, and include a simple produ...
I need assistance creating a new PLC and HMI program to control a conveyor. The HMI should allow operators to start, stop, and reset the machine, as well as view alarms, faults. Ideal skills include experience with PLC programming, HMI design, and interfacing with conveyor systems. I want to create a new tracking system for the conveyor belt. At each end there will be four PIR sensors. When the beam is broken, this will activate a pneumatic solenoid valve to move a cylinder. If the PIR is triggered for more than a predetermined amount of time this will give an output to an Amber Beacon to warn the operators that the belt is not tracking back. There will also be four limit switches and if they are broken by the conveyor belt it means the tracking has failed and the conveyor b...
I need an experienced Ignition developer to refresh several existing HMI screens so operators can work faster and with fewer errors. The project is strictly about modifying what is already in place—no brand-new SCADA build. The current screens have grown cluttered over time, so I want to: • update the screen layout and overall visual design • improve how alarms, trends, and live data are displayed • refine controls, buttons, and all operator actions All changes should follow proven usability practices, respect our plant’s color-coding standards, and remain fully compatible with the Ignition version we are running. Final deliverables are the updated project export, any custom scripts or templates you create, and a brief hand-off document that expla...
Delta PLC Programmer Required – Modbus RTU RS485 Machine Counter We require an experienced Delta PLC programmer for our factory production-counting system. PLC: Delta DVP14SS211R (SS2 Series) Communication: Modbus RTU RS485 Master: Dell Linux server using Python PyModbus 3.15 Requirements 1. Configure Modbus RTU slave communication at 9600 baud, 8N1, slave ID 10. 2. All 8 digital inputs (X0–X7) must function as independent production counters. 3. Each machine produces approximately 15,000 pulses per day. 4. Use independent 32-bit counters capable of handling millions of counts without overflow. 5. Each input must support individually adjustable debounce and pulse lockout from 100–2000 milliseconds, controlled through Modbus registers. 6. Preserve ...
Project Title: Urgent University Report on Vodafone – Corporate Governance, Stakeholders and Ethics Project Description I need an experienced academic writer or editor to help me with my university coursework on Vodafone Group Plc. The report is for my ACC1125 module and must be approximately 2,000 words. The report needs to analyse Vodafone’s corporate responsibility and accountability, focusing on corporate governance, stakeholder engagement, and ethics and modern slavery. Required report structure: Introduction (approximately 150 words): Introduce Vodafone, its background, business activities and the aim of the report. Corporate Governance (approximately 400 words): Discuss the UK Corporate Governance Code, the roles of the chairperson and CEO, board structure, ...
Summary Looking for an experienced Ignition SCADA developer to connect existing Excel-mapped PLC tags to buttons, controls, and indicators. Must work with me live via screen sharing and explain the process so I can learn while we develop.
Cavisa Oil Lda is upgrading its Seahawk cementing unit so every sack pumped, part replaced, and pressure test performed is captured automatically instead of on paper. What I need is a combined data-management and inventory-tracking system that plugs into the unit’s existing sensors and PLC signals, stores the raw readings securely, and turns them into useful information on a live dashboard. The dashboard should refresh in real time, giving operations staff instant visibility of: • Daily operation logs (volumes, rates, pressures, temperatures) • Cement-usage reports (blend, density, total sacks, leftovers) • Equipment-replacement records (part number, reason for change, time stamp) I expect clean database architecture, user-friendly web or tablet interfa...
... • High-level commentary on significant production swings, curtailment, or outages that materially affect the numbers. • Simple charts—daily and cumulative energy, capacity factors, and a single page that lets senior management grasp portfolio health at a glance. You’re free to choose the layout so long as it remains consistent month to month and the calculations are traceable back to raw SCADA or inverter data. I will supply the data dumps; you transform them into the polished summary. Acceptance criteria 1. Totals for each site reconcile exactly with source sheets. 2. Variances versus target are highlighted in both kWh and percentage terms. 3. The final report reaches me no later than the 5th business day of the following month. If you hav...
Need simulation of conveyor & robot system with motion control via Rockwell PLC using EIP communication to help diagnose the PLC software. 3 motion controllers in use. Current static model is built in Autodesk Inventor. Add more features into our solution. AI may be used to enhance its functionality as it is used. We shall rely on your expertise for features that you will suggest. submit your prior related experience as well. If no experience is attached, with 1st reply, will mean you have no experience & will treat you that way. Your 1st response will be the basis for our interaction. Must read & understand everything before going further. suggest any open source software if you are going to need. any tools or services used shall be provided, with their sources ...
A user-configurable web app (HW/OS/Brower agnostic) to emulate a physical crane control or general remote hand held pendant. 1. NxM cell matrix display. Each cell has 3 PLC addresses assigned to it. Read or write to PLC. 2. A background static display with label (showing live data) overlay. Each label like above cell. Maybe in 2 phases - 1. hardcoded configuration. 2 user configurable. Key Features... · Mobile HMI and graphics · Integrated camera support · QR and barcode scanning · Voice commands · Face recognition and user authentication · Cybersecurity and audit logs · OTA updates · Independent safe actions authorization · Emergency stop supervision · Deadman monitoring · Communication watchdog &mi...
...automated communication and control device. My concept is outlined, but I need a hands-on collaborator who can turn that concept into both a solid research report and a fully functioning prototype. The work spans mechanical and electrical domains: confirming design assumptions through literature review, running sizing and stress calculations, selecting sensors, motors, and a suitable microcontroller or PLC, and then integrating everything into a working assembly. From CAD layouts and wiring diagrams to firmware that drives the control logic, each piece must be documented so it can satisfy academic submission requirements as well as a live demonstration. Key deliverables • Research summary with cited references that validates design choices • Detailed mechanical draw...
...together with a local copy of Llama so I can: • keep the system completely air-gapped, • pull live SCADA data, and • interact with it through the Llama model or route commands through OpenClaw. What I expect from you 1. A repeatable, step-by-step guide that starts with downloading the correct JetPack image, SDK Manager-ready packages, and all dependencies, then walks through flashing the Orin Nano from an offline host. 2. An offline installer (or clearly scripted process) for both OpenClaw and the Llama model version you recommend, verified to run locally with no external calls. 3. Configuration instructions or sample code that demonstrates how to ingest typical SCADA data (Modbus/TCP is fine as an example) and expose it to Llama/OpenCla...
I need a compact SCADA application that will simply display my level radar readings through a software interface running on Windows. The focus is strictly on clear, real-time visualisation—think straightforward value read-outs, trend graphs if convenient, and alarm pop-ups whenever limits are breached. My current use case is “Display level radar”, so the whole project circles around connecting to that single instrument, polling it at a sensible rate, and showing the data with zero clutter. If you can keep the install footprint light and the UI intuitive, we will be on the same page. Deliverables • Windows-ready executable or installer • Config file (or editable section) where I can set COM/IP parameters, thresholds, and units • Brief user...
...cm wide—so the mechanism can be optimised for those maximum dimensions. Existing Hardware & Control System (Must be integrated) • The electrical & pneumatic logic is already pre-engineered in our machine's schematics (Siemens S7-300 PLC). • 180° Turning Drive: We already have the original Siemens Sinamics S120 Servomotor (with encoder) on-site to drive the 180° turning frame. • Clamping & Pushing: Pneumatic clamping cylinders (grippers) to hold the mesh during rotation and a pneumatic pusher cylinder. • Stacking Trolley: Driven by a 400V AC brake motor (ABB VFD) on floor rails, equipped with a 2-stage pneumatic lifting/lowering system. Scope of work 1. Develop a native SolidWorks 3D model of the complete turning and stac...
I have an industrial machine project that now needs clear, build-ready documentation. I’m looking for precise electrical schematics together with a detailed 2-D control-panel layout that an electrician can follow without second-guessing anything. Scope – The schematics must cover the entire production-line control system, showing every motor, sensor, safety device, PLC, relay, contactor, power supply, push button, indicator light, and the touch-screen HMI. – Wire numbers, terminal references, and device tags should match across the schematic pages and the physical panel drawing. – Component spacing, DIN-rail positions, cable ducts, and panel cut-outs should be shown to scale so the shop can drill, punch, and wire directly from your drawing. Preferred ...
I’m replacing a bulky PLC in my six-slot battery-swapping station with a Raspberry Pi (or any reliable Linux SBC) and need end-to-end gateway firmware written in Python or Node.js. Core functions I must see working • MQTT link: publish live slot and battery data to my cloud server and accept commands from the same endpoint plus our mobile app. • Lock control: drive a 12 V relay board that energises the electromagnetic locks on all six slots. A cloud “unlock” or “lock” command should actuate the relay instantly. • Dual-bus BMS reading: collect SoC, voltage, temperature and any fault flags from the batteries over both CAN-Bus (MCP2515) and RS-485 Modbus, then forward the parsed payload upstream. • Connection-loss rule: if the ...
I have an existing RSLogix 500 ladder of 85 rungs. Its sole purpose is to control electric motors, specifically handling precise speed regulation and motor/cabinet use. This RSS needs to be rewritten into Click Plus C2-01-CPU-2. A-B plc has failed and being replaced to Click. Here is what I need: • RSLogix 500 translated into the Click Plus software environment. • All rungs organised logically, with clear rung comments and tag names so future maintenance is simple. • A brief overview (PDF or Word) describing the control strategy, the registers/timers you used, and how to tweak set-points.
I need an experienced Renu PLC professional to run live, one-to-one sessions with me online. I am a complete beginner, so the course must start from the absolute basics of PLC theory and ladder logic, then move gradually into practical work. Scope of learning • Core PLC concepts and ladder logic, explained step by step • Integrating sensors and HMI panels for real-world I/O • Controlling stepper and servo motors • PLC communication set-ups and fault-finding techniques • Guided mini-projects that replicate industrial automation tasks I can build at home What I’ll have on my side I will buy the recommended Renu PLC, associated I/O modules, sensors, and motors so I can practise between classes. Sessions will be he...
...Center BMS, EPMS, SCADA & PLC Testing and Commissioning Project Overview I successfully executed testing, commissioning, and system integration activities for Building Management Systems (BMS), Electrical Power Monitoring Systems (EPMS), and automation architectures in data center projects. My responsibilities included system configuration, troubleshooting, functional testing, and coordination with multidisciplinary teams to ensure reliable system operation and successful project delivery. Roles & Responsibilities 1. BMS & EPMS Testing and Commissioning Performed onsite system delivery, testing, and commissioning of BMS, EPMS, and automation systems for data center projects, ensuring compliance with project requirements and operational expectations. 2...
I need a production-ready PCB that will sit at the heart of an advanced industrial automation and control system. The board must coordinate multiple high-speed sensor inputs, drive several actuator channels, and communicate reliably with a PLC over both Ethernet and RS-485. Because the application environment is electrically noisy, careful attention to EMI/EMC, differential pair routing, and galvanic isolation is essential. Scope of work • Translate my functional block diagram into a complete multi-layer schematic • Lay out the board for compact, high-integration placement while respecting creepage/clearance and thermal restraints • Provide a clean power architecture that supports 24 V industrial rails and generates the regulated logic rails with minimal ripple...
City of Iowa Park SCADA Improvements STRUCTURAL DELEGATED DESIGN GENERAL NOTES: 1. CONTRACTOR SHALL OBTAIN COMPREHENSIVE ENGINEERING ANALYSIS BY QUALIFIED PROFESSIONAL STRUCTURAL ENGINEER, USING PERFORMANCE REQUIREMENTS AND DESIGN CRITERIA INDICATED IN THESE DRAWINGS AND SPECIFICATIONS. EVALUATE EXISTING SOIL CONDITIONS, WIND SPEED FACTORS, AND THE SPECIFIED MATERIALS TO DETERMINE THE STRUCTURE REQUIRED. PROVIDE PROFESSIONAL SIGNED RECOMMENDATIONS AND/OR DESIGN DOCUMENTS FOR THE FOLLOWING: 2. 1.1. ELECTRICAL H-RACK DETAILS. 1.2. ANTENNA DETAILS. CONTRACTOR SHALL PROVIDE STRUCTURAL EXPERT WITH ALL RELEVANT INFORMATION REQUIRED TO MAKE COMPETENT RECOMMENDATIONS, INCLUDING BUT NOT LIMITED TO THE FOLLOWING: 2.1. 2.2. 2.3. 3. PLANS AND SPECIFICATIONS FROM THIS PACKAGE. STRUCTURE'S P...
...multi-depth bays. • Specify electrical and control components that allow semi-automatic travel, pallet pick-up / drop-off, basic obstacle detection, and manual override. • Produce clear CAD files (STEP + native format), fabrication drawings, and a bill of materials that a metal-fabrication shop can follow. • Provide a brief control logic diagram and recommended firmware platform so an in-house PLC team can integrate the shuttle with existing warehouse management software. • Include maintenance notes—battery change/charging strategy, lubrication points, and spare-parts list. Success criteria • Dimensional fit within a typical 100 mm clearance envelope of standard racking channels. • Verified load calculations showing deflection and sa...
I need a Twincat software application modifying to perform controls and interfaces for an environmental test cell. Key requirements: - Modify existing control logic - Integrate with existing test cell hardware - Ensure safety and reliability in operations - Provide commissioning support Ideal Skills and Experience: - Proficiency in Twincat control and HMI - Experience Safety functions (Estop) within TwinCAT - Ability to simulate prior to commissioning - Good documentation practices
# Kinco GH043E HMI & PLC Development — Proprietary Controls, Wireless Customer Access and Remote Commissioning We are seeking an experienced industrial controls programmer to develop a complete HMI and PLC control system for our proprietary Bud Dryer equipment, including **mandatory customer wireless monitoring, operation and programming capabilities**. This is a joint project between **TCI Scientific Innovations LLC** and **The Original Resinator LLC**. The project IP will be jointly owned by both companies under our separate written agreement. **HMI:** Kinco GH043E **Machine location:** Our partner company’s facility in Santa Rosa, California, USA **Work arrangement:** Remote development, integration, testing and commissioning on our actual machine ...
I have a Cognex vision camera already mounted above a high-speed food-and...delivers reliable results), setting proper exposure and calibration, then mapping the pass/fail result to our PLC over Ethernet/IP so the reject gate triggers in real time. Deliverables • Completed In-Sight job file, ready to load • Brief documentation covering tool settings, lighting guidance, and I/O mapping • Two remote sessions: initial commissioning and one follow-up after a full shift for final tweaks Acceptance criteria: during a controlled test the system must catch at least 95 % of known packaging defects with fewer than 1 % false rejects. I can schedule flexible hours for the remote sessions to match our production windows and will supply all images, part drawings, and P...
I need an experienced ABB service engineer who can come to our plant, access both the ACS 800 and ACS 5000 series drives, pinpoint whatever is tripping them and get us running reliably again. The job is entirely on-site; I will arrange direct access to each VFD cabinet and any schematics you might request. Standard plant safety rules apply—nothing beyond the usual PPE and lock-out procedures. Your task starts with a full diagnostic: download fault logs, inspect power sections, check cooling, and verify parameter sets against ABB recommendations. Once the root causes are clear, I expect you to carry out or guide the physical repairs—whether that involves component replacement, board swap-outs, firmware updates, or even simple parameter corrections—and then commissi...
I need an experienced ABB service engineer who can come to our plant, access both the ACS 800 and ACS 5000 series drives, pinpoint whatever is tripping them and get us running reliably again. The job is entirely on-site; I will arrange direct access to each VFD cabinet and any schematics you might request. Standard plant safety rules apply—nothing beyond the usual PPE and lock-out procedures. Your task starts with a full diagnostic: download fault logs, inspect power sections, check cooling, and verify parameter sets against ABB recommendations. Once the root causes are clear, I expect you to carry out or guide the physical repairs—whether that involves component replacement, board swap-outs, firmware updates, or even simple parameter corrections—and then commissi...
...optimisation. • Configuring and fine-tuning Siemens SCADA along with its associated automation hardware; familiarity with platforms such as Rockwell Automation or Schneider Electric is welcome but not essential. • Integrating third-party vendor packages—typical PLC, instrumentation, and communication subsystems—into the main control architecture. • Leading on-site troubleshooting, coordinating with OEM representatives, and closing punch-list items quickly. • Generating clear daily progress reports and final commissioning dossiers for client sign-off. Key requirements • Minimum 10 years’ field commissioning experience specific to SWRO or closely related desalination/water-treatment plants. • Proven track record work...
Ignition HMI/SCADA screen designer — operator UI redesign (regulated life-sciences) I’m looking for an experienced HMI/SCADA designer to redesign a set of operator screens for a regulated life-sciences application. The existing screens work but need a cleaner, modern, more user-friendly redesign. Scope: Redesign existing operator screens for clarity and ease of use Good HMI practice: clear layouts, logical navigation, readable alarm/status presentation, consistent styling Deliver a clean, modern, professional look Ideal experience: Ignition (Perspective and/or Vision) — required Industrial HMI/SCADA screen design Familiarity with GMP / 21 CFR Part 11 environments a plus Please share relevant HMI/SCADA work samples. Project specifics and s...
...and 2-D layout drawings, P&IDs, mechanical details, pipe-work and skid design, equipment sizing, instrument lists, cable routing and a coordinated bill of materials. Component selection must balance energy efficiency, durability and ease of maintenance; typical items will be high-pressure pumps, energy-recovery devices, membrane housings, cartridge filters, chemical dosing, control valves and a PLC/HMI package. Compliance & performance The plant should be engineered to meet commonly accepted international codes for pressure vessels, electrical safety, and quality management (ISO/ASME/EPA or equivalent). Target permeate quality is potable-grade, with recovery and specific energy consumption comparable to best-in-class commercial units. Process & milestones 1. Concept...