Zigbee hardware jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    34,361 zigbee hardware jobs found, pricing in INR
    ZigbeeFirmware code 6 days left
    VERIFIED

    pls read this before you bid to avoid wasting of time an electrical expert need to complete a code use to generate firmware built for Zigbee for DL-22 module , more details will be given. You must have DL-22 cc2530 module to verify your code

    ₹5388 (Avg Bid)
    ₹5388 Avg Bid
    2 bids

    Wanted to develop mobile application to track any vehicle through GPS. We have hardware supplies but need someone who can develop mobile app to track those devices installed in vehicles.

    ₹12474 (Avg Bid)
    ₹12474 Avg Bid
    1 bids

    PROJECT OVERVIEW Automated Fare Collection Solution, which serves as a basis for cashless payments primarily in the transportation industry, but not exclusively limited to the transport sector. PROJECT HARDWARE AND SOFTWARE The software is a cloud-based solution, that is the backend of the whole payment platform. From handling customer accounts, to detailing transactions made daily in real-time....

    ₹184898 (Avg Bid)
    ₹184898 Avg Bid
    5 bids
    Hand washing detection model 6 days left
    VERIFIED

    I need a Machine Learning expert to create datasets and light model to detect hand washing using a 3-Axis Accelerometer strapped on your wrist. You must to have your own hardware.

    ₹11884 (Avg Bid)
    ₹11884 Avg Bid
    7 bids
    ₹1698 Avg Bid
    1 bids

    I need a developer than can develop a c++ Gstreamer libraray than must get video from rtsp ip camera , get audio from alsa hardware , mix them , syncronzied audio and video and save to an mp4 files splitted by 5 minutes , and also it must restream rtsp audio/video syncronzied.

    ₹18453 (Avg Bid)
    ₹18453 Avg Bid
    3 bids

    I need a new website. I need you to design and build a landing page.

    ₹34618 (Avg Bid)
    ₹34618 Avg Bid
    65 bids

    Need help in development of schematic for STM32G4 series controller 1. Programing using STLINK-V3 modular in-circuit debugger and programmer: Target board circuit design help needed. 2 . Pin mapping for IO peripheral 3 . Want to learn and clear doubt on some pins : VBAT, NRST, VDDA, Oscillators design, LED connections, Agnd vs Signal ground, We will take call to discuss and present screen...

    ₹590 / hr (Avg Bid)
    ₹590 / hr Avg Bid
    5 bids

    My project is "Wearable textile-base Microstrip Antenna" I am looking for an expert who can design microstrip patch antenna on HFSS software and then write a long report. I need in to assist me in developing the hardware of my project as well.

    ₹9300 (Avg Bid)
    ₹9300 Avg Bid
    8 bids
    VLSI Project -- 3 6 days left
    VERIFIED

    Looking for someone with experience in VLSI and the cadence virtuoso software. Need to implement a certain function in hardware. Please let me know if you are interested and we can discuss more. Thanks

    ₹11072 (Avg Bid)
    ₹11072 Avg Bid
    9 bids

    • Research, design & validate PCBs in the lab supporting Raspberry pi / Arduino & ESP32/8266 MCUs for embedded products. • Develop & maintain IoT systems, HW/SW interface on Pi and Arduino based microcontrollers • • Devise a method for Multi-sensor’s data to enhance its embedded computing with LoRa Raspberry Pi module using multiple frequencies and increase ef...

    ₹44730 (Avg Bid)
    ₹44730 Avg Bid
    23 bids

    Install, upgrade, support and troubleshoot Windows 7, 8,10 ,Linux and MAC OS Experience in Microsoft Office and other desktop applications Install, upgrade, support and troubleshoot for printers, computer hardware, mobile devices (iPhone and Android) and other authorized peripheral / equipment Good understanding of hardware peripherals and troubleshooting in laptop and desktop Performs general pre...

    ₹1402 / hr (Avg Bid)
    ₹1402 / hr Avg Bid
    10 bids

    i am computer hardware networking work all network work and os installtion work done here and all printer installtion done

    ₹1033 (Avg Bid)
    ₹1033 Avg Bid
    4 bids

    I need a developer than can develop a c++ Gstreamer libraray than must get video from rtsp ip camera , get audio from alsa hardware , mix them , syncronzied audio and video and save to an mp4 files splitted by 5 minutes , and also it must restream rtsp audio/video syncronzied.

    ₹12991 (Avg Bid)
    ₹12991 Avg Bid
    3 bids

    iam computer hardware networking work all software installtion and networking work all network printer installation Done

    ₹960 (Avg Bid)
    ₹960 Avg Bid
    1 bids

    We have a host MCU nrf52840. We need to use CryptoAuthlib of ATECC608A to perform secure authentication of the secure hardware. For that, the secure HAL will need to be ported for this host MCU. [login to view URL]

    ₹12474 (Avg Bid)
    ₹12474 Avg Bid
    2 bids

    I need a developer than can develop a c++ Gstreamer libraray than must get video from rtsp ip camera , get audio from alsa hardware , mix them , syncronzied audio and video and save to an mp4 files splitted by 5 minutes , and also it must restream rtsp audio/video syncronzied.

    ₹19412 (Avg Bid)
    ₹19412 Avg Bid
    3 bids

    Hi Batyr, I would like to migrate from Windows to Linux, and have some experience; I have installed Ubuntu on a couple of machines in the past and have used the terminal to install new software, etc. I would like to get detailed feedback for the specific hardware I have to make sure all of it is compatible with Linux (new computer) before taking the plunge and wiping windows, as I teach online an...

    ₹738 / hr (Avg Bid)
    ₹738 / hr Avg Bid
    1 bids

    I need a hardware ID spoofer that will change serial numbers, model and manufacture with user friendly instructions. Applications that request hardware data should not receive real data, but those that will be emulated by your application. The real data about the hardware of the computer for application should be hidden. I need it to spoof serial numbers, model and Manufacturer: Obigious condit...

    ₹2214 - ₹18453
    ₹2214 - ₹18453
    0 bids

    We are looking for a CAD engineer to amend and Edit a CAD Step file of a Childs Car seat to add limit switches, PCB, Wiring, a variety of sensors, a fan and heating mat. you must have experience of researching and sourcing electrical components and switches to integrate into hardware. The ability to have the parts made via SLA Printing and putting the samples together is a bonus.

    ₹41556 (Avg Bid)
    ₹41556 Avg Bid
    22 bids

    I have 4 Dell PowerEdge servers. Looking for someone to build a Cluster of 2 Computing Servers and a Cluster of 2 Database servers. Basically, I can explain in detail my needs and looking for a possible solution too. Based on the solution provided, I'll move on with the setup part for the servers. All the Hardware and networking devices are available and I'm open to help with any hardwa...

    ₹44656 (Avg Bid)
    ₹44656 Avg Bid
    8 bids

    I need a developer than can develop a c++ Gstreamer libraray than must get video from rtsp ip camera , get audio from alsa hardware , mix them , syncronzied audio and video and save to an mp4 files splitted by 5 minutes , and also it must restream rtsp audio/video syncronzied.

    ₹14615 (Avg Bid)
    ₹14615 Avg Bid
    5 bids
    Telecommunication Engineers 4 days left
    VERIFIED

    I am looking for a telecommunication engineer who can work on this project "Wearable Textile-Based Microstrip Patch Antenna". I I need complete project including Coding, Simulation, Hardware and Report writing Further details I will share in chat.

    ₹8857 (Avg Bid)
    ₹8857 Avg Bid
    8 bids

    Measurement and control of power system Components involved : ESP 32/8266 , SIM 800L or Equivalent , ACS 712 current sensor , Z series Voltage sensor , 16 A relay Job : Development of hardware layout . development of software for the board . Communication of the board to be via MQTT

    ₹13803 (Avg Bid)
    ₹13803 Avg Bid
    10 bids

    hardware cheat csgo

    ₹6643047 (Avg Bid)
    ₹6643047 Avg Bid
    1 bids

    For increasing the range of my ZigBee devices, i would like an firmware, built for the DL-22 module (CC2530+CC2591) so it will act like an ZigBee router. My Coordinator should be able to find the new router, through scanning after the EUI (Like when pairing a regular ZigBee device). In general, the functionality of a regular smartplugs router capabilities, inserted into the DL-22 module. This is ...

    ₹21701 (Avg Bid)
    ₹21701 Avg Bid
    4 bids

    Hi Burak, I noticed your profile and would like to offer you my project. We required a PID algorithm To achieve Set RPM and maintain SET TORQUE. This Dynamometer has 2 Electric BLDC Motors coupled and controlled using the controller. Once you agree we can discuss the price. Please find a reference video below how the hardware looks [login to view URL]

    ₹3691 (Avg Bid)
    ₹3691 Avg Bid
    1 bids

    Hi Burak, I noticed your profile and would like to offer you my project. We required a PID algorithm To achieve Set RPM and maintain SET TORQUE. This Dynamometer has 2 Electric BLDC Motors coupled and controlled using the controller. Once you agree we can discuss the price. Please find a reference video below how the hardware looks [login to view URL]

    ₹7381 (Avg Bid)
    ₹7381 Avg Bid
    1 bids

    Hi Burak, I noticed your profile and would like to offer you my project. We required a PID algorithm To achieve Set RPM and maintain SET TORQUE. This Dynamometer has 2 Electric BLDC Motors coupled and controlled using the controller. Once you agree we can discuss the price. Please find a reference video below how the hardware looks [login to view URL]

    ₹3691 (Avg Bid)
    ₹3691 Avg Bid
    1 bids

    Hi Burak, I noticed your profile and would like to offer you my project. We required a PID algorithm To achieve Set RPM and maintain SET TORQUE. This Dynamometer has 2 Electric BLDC Motors coupled and controlled using the controller. Once you agree we can discuss the price. Please find a reference video below how the hardware looks [login to view URL]

    ₹7381 (Avg Bid)
    ₹7381 Avg Bid
    1 bids

    Hello I am a student studying electrical engineering in my Master's degree. It is my dream to have an own product to sell. Therefor, I have many ideas in my free time and create the hardware myself. My biggest weakness is when one of my projects needs software. That's why I need the help of you. In this specific project, I want to provide the client a tool that allows the client to cre...

    ₹29377 (Avg Bid)
    ₹29377 Avg Bid
    2 bids
    I need Engineer 3 days left

    Building that was hardware shop converted into auto repair shop. Mechanical electrical and plumbing to provide to township for approval. As well as exterior design.

    ₹155521 (Avg Bid)
    ₹155521 Avg Bid
    19 bids

    I need a 3ds max file for this specific handle, as close as possible The handle is [login to view URL] or [login to view URL]

    ₹5336 (Avg Bid)
    ₹5336 Avg Bid
    4 bids

    are you able to help me reconfigure the Arduino and then we will upgrade the hardware to a better control board

    ₹10776 (Avg Bid)
    ₹10776 Avg Bid
    17 bids

    I have a tracking device based on an STM32 CPU and I need to connect to AWS-IOT using a GSM modem. I am looking for someone to provide me with the basic STM32Cube project which establishes the connection to AWS using credentials which I can provide. I will then be able to add the extra code I need myself once I have a working connection to AWS. I can discuss the project in more detail over chat an...

    ₹3174 / hr (Avg Bid)
    ₹3174 / hr Avg Bid
    4 bids

    Looking for an engineer who is experienced in Embedded C programming to complete the project for LED video wall Capable of finding the processor for requirement Should able to understand the datasheet and schematic   experience in working with ATMEL, microchip etc Experience with memories and selection aware of led Multiplexing using TI Led driver Familiar of interface protocols like I2c...

    ₹12917 (Avg Bid)
    ₹12917 Avg Bid
    7 bids
    Call Businesses 3 days left

    Hello, I am looking for someone to call Australia businesses to sell leads we generate. We only take a percenatge of what the business charges for the completed job so they only pay for what they use. You must have the abilbity to call Australia, I will not providing any hardware/software. I will provide a list of targets to call.

    ₹369 / hr (Avg Bid)
    ₹369 / hr Avg Bid
    7 bids
    FAMJ Group 3 days left

    connective ,loan and hardware business

    ₹45099 (Avg Bid)
    ₹45099 Avg Bid
    5 bids

    The central aim of this project is to design a system to identify objects on a conveyor belt using machine vision. Many different methods are available for object detection. But we will design such a system that not only detects the object but also separates and counting them. Due to the advantage of MATLAB software for effectively controlling the hardware, it will use in this work. The design an...

    ₹13803 (Avg Bid)
    ₹13803 Avg Bid
    10 bids

    Seeking to short-term contract an experienced developer. Must be familiar with Cypress PSoC, Power Delivery, I2C, and USB charging in general. Must be able to read schematics in order to manage hardware resources, write low level code to support non-standard hardware as well as making use of Cypress' supplied API's. Comfortable using PSOC Creator, MiniProg3, and CCG3 Development Kit. Wil...

    ₹316283 (Avg Bid)
    ₹316283 Avg Bid
    7 bids

    I am looking for someone with expertise in CV writing and skillful in graphics to help updating both my CV and LinkedIn profile. I have 26 yrs of work experience, mostly in the IT industry (Software, Hardware, Cloud). My roles were mostly around sales management, business development then shifted to customer success management and recently managing programs and PMO around cloud business and retent...

    ₹8857 (Avg Bid)
    ₹8857 Avg Bid
    10 bids

    We need developer, who have experience in IoT and various Sensors. Kindly suggest following things in your proposal: 1. Software Development Technologies (Without OS) 2. Hardware to be used in the Smart watch (Water proof, Fire Proof, Temperature Proof, Un Breakable) 3. Security features: End to End Encryption, Self Destruction of Hardware 4. Estimated cost of Hardware per unit

    ₹12745 - ₹38236
    ₹12745 - ₹38236
    0 bids

    Need to add NSX, in a very professional manner Please note that this is a NEsted deployment and will need a special approach and experience, Experience working with Besar metal and Hardware equipment only won't help Very good knowledge of Virtual networking is also essential.

    ₹11146 (Avg Bid)
    ₹11146 Avg Bid
    3 bids

    Transport 4K video from iPad (iOS) to single location (decoder) Hello we need a developer that will develop an app which can transport 4K video from an iPad to a single location. It's important to note that we need the incoming video to be 4K, that is an absolute must. The video will originate using the iPad's camera (using an iPad that has 4k camera). This app is not for the public, i...

    ₹163788 (Avg Bid)
    ₹163788 Avg Bid
    9 bids

    Hi! I need two apps. One main app and another app, the monitors the first app. Here is, how the apps should work and what they should do. app1 config file - storage type json array - values to be saved on config json array - portrait or landscape mode - start url - daily restart time (more than one schedules possible a day) - screen on/screen black times (more than one schedules possib...

    ₹29303 (Avg Bid)
    ₹29303 Avg Bid
    10 bids

    VHDL software and hardware help and kind of tutoring if possible, please.

    ₹738 (Avg Bid)
    ₹738 Avg Bid
    1 bids

    It includes helping with vhdl software and hardware. kind of tutoring if possible please

    ₹738 (Avg Bid)
    ₹738 Avg Bid
    1 bids

    I [login to view URL] engineer in computer science I am best excel expert and all file converter into any formate like-pdf, excel, word, jpg, jpeg etc. And I have also hardware and Networking diploma so I will full support you of any technical problems of IT related.

    ₹1107 (Avg Bid)
    ₹1107 Avg Bid
    6 bids

    We need to setup (hardware and software) a CNC 3018 router and a Anycubic MegaX 3d printer.

    ₹11810 (Avg Bid)
    ₹11810 Avg Bid
    2 bids