Zigbee ime jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    1,103 zigbee ime jobs found, pricing in INR
    ₹62521 - ₹125042
    0 bids

    ...or smart phones. • Email or text message alerts when events do and don’t occur • All-in-one touch screen security panel which is simple to install and supports a host of devices. • Should also be able to reuse existing wired or wireless sensors, keypads and peripherals from previously-installed security systems. • The solution should combine wireless technologies (Wi-Fi Zigbee etc) with industry leading security control panels. • Web or smart phone access to your home security system remotely to look in on your children or pets by pulling up a live video feed from cameras at home(with local and remote recording) • Keep eyes on your property with a home security monitoring system when you're not at home. ...

    ₹58353 (Avg Bid)
    ₹58353 Avg Bid
    1 bids

    We have developed a product which has a zigbee chip installed and is working at a basic level. What we require is a expert in the area of creating software to faciliting secure communiocation between ours and other vendors zigbee enabled equipment. We will also require recommendations on the select of third party equipment for intergartion into the wireless mesh network created with the installtion of our proprientry devices. There is the possibilty of on going work for the right person.

    ₹63354 (Avg Bid)
    ₹63354 Avg Bid
    1 bids

    We are looking for an experienced electronics engineer with knowledge of ZWave or Zigbee wireless protocols and excellent circuit design skills to assist in a feasibility study for the development of a multi-node lighting controller. Please submit bids based on the study taking 20 hours to complete. (Note this is not to build a controller - just to investigate the requirement and identify possible technical issues.)

    ₹30010 (Avg Bid)
    ₹30010 Avg Bid
    4 bids

    This project was posted earlier but not enough technical details were provided. Now all the technical details are attached including software interface. We are looking for custom FTP / Replication software that will allow us to move files from one location to another. We are referencing features from the follow...us to move files from one location to another. We are referencing features from the following two applications. Please keep in mind that the software does not have to be very fancy but has to work. If you think some of the features are too costly to implement, please mention that to us before placing a bid. <> <> ## Deliverables Please see attached zip file for technical details.

    ₹73691 (Avg Bid)
    ₹73691 Avg Bid
    6 bids

    My project objective is to use a ZigBee star network to send temperature data and show it in the computer My board is DM1630275. I have set up a star network and able to send the data.I also have examples of temperature sensor program codes. I have three nodes communicating with the coordinator in a star coordinator is connected to the computer with RS232. The project is almost finish. Our main problem now is (1) Unable to extract temperature data from the sensor. (2) Unable to display the temperature data in the computer.

    ₹22508 (Avg Bid)
    ₹22508 Avg Bid
    5 bids

    * Zigbee wireless module in small form factor (10cm x 5 cm or similar) with PCB-mounted low-cost humidity/temp sensor (e.g. SHT10 or similar). - integrated PCB antenna - 2x AAA batteries * Sensor module communicates with Zigbee host (Zigbee Coordinator), implemented as small form-factor USB dongle. * Dongle plugs into host computer USB port, performs data read from sensor at programmed intervals and generates SMS, email, tweet alerts as programmed. * Setup and programming software will be downloaded from the dedicated website. Software to run on Win7/Vista/XP and Mac. * Zigbee sensor will be able to relay data from other sensors (if present). * Sensor module battery life at least 1 year, assuming 1000 data reads/year. * Target BOM for both sensor module ...

    ₹347533 (Avg Bid)
    ₹347533 Avg Bid
    24 bids

    We've upgraded our website. And there have been a few issues in the upgrade. We want to get everything working the way it used to: we have: Calendar not wanting to display items even though they are in the DB. (no php errors) Gallery wont show images. (even though they are saved on the system) wysiwyg has gone a bit crazy and won't stay inline. And we have a few ot...everything working the way it used to: we have: Calendar not wanting to display items even though they are in the DB. (no php errors) Gallery wont show images. (even though they are saved on the system) wysiwyg has gone a bit crazy and won't stay inline. And we have a few other small questions about Drupal in general. This project is to help us get these working. Our budget is $30USD. Say IME...

    ₹3585 (Avg Bid)
    ₹3585 Avg Bid
    5 bids

    ...this project is to implement an API to an off-the-shelf Zigbee device (acting as a coordinator) that will allow a program to join with, detect added/removed zigbee devices in the network and send/receive data to/from devices. API will generate a debug log optionally. API code must be commented and documentation provided for the API. You'll also need to create a test program to test the API. For testing purpose, we'll use temperature sensors, motion detectors, alarms and a remote control. These devices should be zigbee enabled and available off-the-shelf. You'll need to implement a daemon that utilizes this API to list the sensor devices and turn on/off and to activate and deactivate the alarms on receiving specific data from the zigbee dev...

    ₹28343 (Avg Bid)
    ₹28343 Avg Bid
    1 bids

    ...this project is to implement an API to an off-the-shelf Zigbee device (acting as a coordinator) that will allow a program to join with, detect added/removed zigbee devices in the network and send/receive data to/from devices. API will generate a debug log optionally. API code must be commented and documentation provided for the API. You'll also need to create a test program to test the API. For testing purpose, we'll use temperature sensors, motion detectors, alarms and a remote control. These devices should be zigbee enabled and available off-the-shelf. You'll need to implement a daemon that utilizes this API to list the sensor devices and turn on/off and to activate and deactivate the alarms on receiving specific data from the zigbee dev...

    ₹8336 - ₹41681
    ₹8336 - ₹41681
    0 bids

    Hello. I made a Jquery intro banner. Now I am having a hardt ime getting the jquery to work in nopcommerce. you can see my code at 003.spidercommerce.com. Any feasable work around will be accepted, just know I expect this gallery or the jquery function to work on the topic pages, the category pages and the home page that nopcommerce system makes

    ₹1751 (Avg Bid)
    ₹1751 Avg Bid
    2 bids

    ...Including interfacing to the XPortPRO (UART) where a web server will produce a web page to allow the user to setup the system. the XPortPRO software is not included in this contract. 6. Although the existing system works, it may be required to modify the existing code in the end devices to facilitate a robust system. AT Jennie is : • Based on IEEE802.15.4 MAC and PHY (similar to but simpler than ZigBee) • ATjennie is an AT command set (serial) version of Jennie. • PLEASE NOTE- AT Jennie is resident on the Jennic Radio Module. We communicate with the module serially (UART) using an AT command set. • Supports Star, Tree and Linear topologies • Recommended network size up to 500 nodes • Automatic route formation and repair • Network loa...

    ₹104201 (Avg Bid)
    ₹104201 Avg Bid
    4 bids

    Hi frelancers! I need a circuit using an accelerometer conected to the microcontroller via SPI. Every change on the acceleration OR every one second, the microcontroller must send the measured value to another microcontroler by air, using the ZigBee. Hardware: - Accelerometer: Freescale MMA6901Q - Microcontroller: Microchip PIC18F2520 - ZigBee: MRF24J40MB - Power Supply: 3.3V Firmware: - C Language using the Hi-TECH PICC18 or mikroC Pro compiller. I'll receive: - The schematic, - All the source code. Regards, Kenji

    ₹35762 (Avg Bid)
    ₹35762 Avg Bid
    7 bids

    Fix Website Contract Form (HTML) ASAP want website contact forms in working order. On going part-ime position

    ₹3084 (Avg Bid)
    ₹3084 Avg Bid
    10 bids

    different station pumping system can be controlled from control room,i cant interface micro-controller with zigbee.

    ₹12421 (Avg Bid)
    ₹12421 Avg Bid
    5 bids

    Hi, I am looking for someone to design a smart meter with microchip components, i will buy any of the components required from microchip. It would be preferable if you are a U.A.E resident. I currently have the Explorer 16 kit and along with that i have the mcp 3909, and i have a few ZigBee components which i need to interface with either one of these boards. Please let me know if anyone can help me. Thanks, Regards

    ₹110954 (Avg Bid)
    ₹110954 Avg Bid
    3 bids

    You are required to simulate a wireless network environment by using network simulation tools as stated below. You may simulate IEEE 802.11, IEEE 802.16, cellular network, Zigbee, Bluetooth, satellite or even GPS. No specific or requirements are needed in the simulation environment (free to choose), but you must have at least 2 wireless nodes and 2 different types of traffic. Last but not least, show the performance of your simulation Omnet ++ ## Deliverables 1) All deliverables will be considered "work made for hire" under U.S. Copyright law. Employer will receive exclusive and complete copyrights to all work purchased. (No 3rd party components unless all copyright ramifications are explained AND AGREED TO by the employer on the site per the worker's Worker Legal ...

    ₹2501 - ₹3334
    ₹2501 - ₹3334
    0 bids

    I require a Flash to go in this area of my Tech Solutions site. A command prompt > is displayed but code seems to be typed by someone in about 10 lines of code, it is taken from a real programme so it looks like it is real. The ... Text is to be green should use half the space in the attached file. Background can be the same colour as attached. Include an icon/button of cola. This is an Increase speed button . Which makes the light globe ideas animation and stopping for thinking be taken out of the equation with the scrolling go faster and no deletion. Sound icon/button is to have sound of some key press eacht ime a letter is shown. Default should be off. Save icon , Shows a progress bar for about 1 second. Typing continues. Please provide the full swf file. ...

    N/A
    N/A
    0 bids

    Hello Bidders, i have a PSD web interface that needs to be converted to Latest version of Joomla. website has 3 major parts : 1 - PSD Conversion into Joomla. 2 - Creation of a Small Flash Banner like in : http://www.goldenmedia-mar...goes into Article X and edit it by writing : "we reached step 2" and he attaches an other word or pdf document or image to proove what he said. when customer X logs in he find "we reached step 2" and finds the new word / Pdf document, and so on ... the same thing for all customers ... Budget is 80$ inshaALLAH. "Nova Studios" Freelancer DOESN'T HAVE RIGHT TO BID ON THIS PROJECT, HE IS A BIG IME WASTER, HE WASTED MY TIME AND MY CLIENT'S TIME, SO PLZ I WANT TO DEAL JUST WITH PROFESSIONAL PEOPLE, NO...

    ₹20007 (Avg Bid)
    ₹20007 Avg Bid
    5 bids

    ...once you have a better idea of the scope. You must understand serial strings and RS232 protocols. any other protocol expertise would be advantageous eg: Zigbee, Lonworks, Bacnet, Zwave, EnOcean, KNX or any other experience in this field should be listed We will give the programmer instructions on how to install the drivers as they are completed. The following drivers are examples of what is to be written: Security Protege Commercial lighting / aircon etc BacNet Dali - Dynalite Energy Devices Plogg WattsUp Meters Zigbee AMI Zwave Wireless lighting Rako Enocean KNX AV products Elan These are a sample of the drivers that need to be written. The

    ₹41681 - ₹416806
    ₹41681 - ₹416806
    0 bids

    If you can help me take a 10 digit numeric reading off a very small digital display and bring it into a small Atmel Zigbee Wireless processor so it can be transferred wirelessly... and keep it in a very small package. We will then need to send it to a basic wireless receiver with RS232 or HID output. I will provide the hardware. .

    ₹286512 (Avg Bid)
    ₹286512 Avg Bid
    16 bids

    I I am seeking some one to assist me in designing three PCB boards using FR Zigbee XSC modules.

    ₹416806 (Avg Bid)
    Featured Full Time
    ₹416806 Avg Bid
    3 bids

    I have two Xbee Zigbee radios () that need to be used to pass Digital signals back and fourth to each other using the API Stacks. The program needs to take signals from the "end node" and route them to the "cordinator". I would prefer to use the freescale mcu embeded into the Xbee programable version () for the cordinator, but I am willing to make a change if cost prohibits this. ## Deliverables 1) All deliverables will be considered "work made for hire" under U.S. Copyright law. Employer will receive exclusive and complete copyrights to all work purchased. (No 3rd party components unless all copyright ramifications are explained AND AGREED TO by the employer on the site per

    ₹14171 (Avg Bid)
    ₹14171 Avg Bid
    2 bids

    ...understand technical documentation. the skills required are programming in VB and / or C# with Systems integration experience ## Deliverables The following drivers are to be written: Security Protege Commercial lighting / aircon etc BacNet Dali - Dynalite Energy Devices Plogg WattsUp Meters Zigbee AMI Zwave Wireless lighting Rako Enocean KNX AV products Elan These are a sample of the drivers that need to be written. The process for writing a driver would be as follows: 1. We will source the technical documentation and put it up on our project management site 2. you will read and understand the technical documentation 3. you will work with one of our guys in the

    ₹122124 (Avg Bid)
    ₹122124 Avg Bid
    8 bids

    ...or as required. The second device is a wireless relay. Consisting of 2 (4 and 8 as a possibility) relays to switch mains voltages. The device accepts commands to turn on or off a particular relay and to report the relays current state. This device should be mains powered. The Third Device is a USB Wireless Interface it is to plug into a USB port allowing for access to the wireless network. If Zigbee is used then this device would be considered the coordinator. This device will be communicated with PC software through a virtual comm port to configure the sensor device and to manually control the relay device. We need all three devices designed and programmed including PCB layout and a Bill of Materials. The main concern with the project is reliability and cost. When placing...

    ₹214655 (Avg Bid)
    ₹214655 Avg Bid
    5 bids

    ...12VDC switching power supply or as required. The second device is a wireless relay. Consisting of 2 (4 and 8 as a possibility) relays. The device accepts commands to turn on or off a particular relay and to report the relays current state. This device should be mains powered. The Third Device is a USB Wireless Interface it is to plug into a USB port allowing for access to the wireless network. If Zigbee is used then this device would be considered the coordinator. This device will be communicated with PC software through a virtual comm port to configure the sensor device and to manually control the relay device. * More Information Below * ## Deliverables 1) All deliverables will be considered "work made for hire" under U.S. Copyright law. Employer will receive exclus...

    ₹126125 (Avg Bid)
    ₹126125 Avg Bid
    6 bids

    ...know it is an Android device or have access to anything but my app. - I want to keep the features built in Android: - To be able to launch the browser from my app - Use WiFi to connect to the internet - File, battery, IO, TCP/HTTP, USB management - Multitouch (not a requirement) - etc - I need to be able to read data from the USB port to get the elliptical data. This will likely be over Atom+ or Zigbee (from the elliptical to the Android device). - I need to be able to upgrade my app remotely (app connects to server periodically and if there is an update, it downloads and installs it). - I would like to be able to upgrade the drivers and OS remotely as well (not a requirement) You must speak excellent English. Qualified candidates only please. If you don't have experience wi...

    ₹8336 - ₹41681
    ₹8336 - ₹41681
    0 bids

    I am creating a new service model where I provide temperature monitoring and control to clients. I have ordered a iDigi Zigbee development kit. The Gateway works with Python and needs basic programming. This has been completed to some extent. I am looking for a out of the box solution where each building/clients location can be configured with a gateway, sensors, routers and I/O. I need an application built where my clients and I can log on a password protected site and look at the various sensors/temperatures graphically and the status of the boiler, fan etc. Google app with Python is the preferred language. If you have experience and can build this, that is preferable ## Deliverables 1) All deliverables will be considered "work made for hire" under U.S. Copyright law....

    ₹8336 - ₹16672
    ₹8336 - ₹16672
    0 bids

    ...LED for IN or a red LED for OUT, and tweets In/Out status to Twitter.? ? ? ? Each LED needs a reset button for status reset.? Have diagram of the physical In/Out board for clarity.? This is your basic in/out board with RFID capability and visual feedback. ? V2.0 Phase two of the project.? Future dev, not this project. Using Second board for second door, integrate two boards wirelessly using zigbee/ Xbee modules and have status match between two duplicate boards, as well as twitter. ## Deliverables Rent A Coder requirements notice: As originally posted, this bid request does not have complete details. Should a dispute arise and this project go into arbitration "as is", the contract's vagueness might cause it to be interpreted against you, even though you were...

    ₹28343 (Avg Bid)
    ₹28343 Avg Bid
    1 bids

    I currently have a network of wireless 6 Zigbee modules sending temperature readings data to a central Zigbee coordinator. At present these temperatures are being read through serial monitor and as they are coming through very quickly and in vast amount they are difficult to follow. What I would like is an interface that looks like this ;current= basically i need 6 boxes that read the address of the sending zigbee and display the temperature also I would like this temperature saving to an output file. The zigbees are connected to arduino boards and here is the code that operate them Arduino code for Coordinator operating in API mode #include <XBee.h> // include library available at:

    ₹15755 (Avg Bid)
    ₹15755 Avg Bid
    10 bids

    paltalk meeting room can not input chinese directly. If you enter chinese , the font will be in a mass. So we need to develop a small application through which people can enter chinese into Paltalk room directly with chinese input application like Hope the application will be completed in few days. The application should be able to display a window to enter chinese, after enter chinese in the window. press a send button. The chinese will be input the paltalk meeting room. The application is for Windows. NOT needed for MAC and LINUX That is all.

    N/A
    N/A
    0 bids

    I am looking for a good article writer for a long term project . Right now we need 10 of 1000 Words minimum. -All articles must be from the electronics domain from the following topics : Electronics homemade projects , Microcontrollers , Microprocessors , Power Electronics ,Analog Electronics ,Interfaces and Protocols (SPI, I2C, LIN, CAN, ZIGBEE, BLUETOOTH, WIFI, etc) ,Telecommunications GPS/GPRS/GSM and general RF ,SMPS, Lighting, Automotive Solutions ,Motor Control ,New Technologies/Standards ,PCB design , IC design . IC layout design , etc -All articles must be original and will be checked with copyscape before to be paid - All articles must be fluent English written and should have no spelling, punctuation, or grammar errors. - We will own the articles once we will pay...

    ₹5168 (Avg Bid)
    ₹5168 Avg Bid
    29 bids

    Looking for OPNET based performance analysis of two wireless technology Bluetooth and zigbee for patient monitoring. A clear analysis and report of both technology and simulation experiment in OPNET and future enhancement. Please dont bother to just purchase off the net samples will be needed and copyscaped.

    ₹16672 - ₹25008
    Sealed
    ₹16672 - ₹25008
    0 bids

    Looking for OPNET based performance analysis of two wireless technology Bluetooth and zigbee for patient monitoring. A clear analysis and report of both technology and simulation experiment in OPNET IT GURU 9.1A and future enhancement. Please dont bother to just purchase off the net samples will be needed and copyscaped.

    ₹4835 (Avg Bid)
    ₹4835 Avg Bid
    5 bids

    RSSREADER NOTIFY lite DESCRIPTION need an application that after the first easy installation will be reside...that are not in the lite version and in a features will be considering in the upgrade : - uninstall function - a txt file - or something else will permit to the admin to translate and add or remove some xlm feed before the distribution - windows with shadows/ transparent effect - sound on appearing - fully customization of dimension, color, logo, etc. - ability to set the check for news ime - ability to add a group of xlms if necessary - upgrading to a new version by internet - check for new versions features ___ NOTE those lasts features - are well accepted but optional in this first lite version ___ if the goal are reach. in the future will be ask th...

    ₹9587 (Avg Bid)
    ₹9587 Avg Bid
    7 bids

    Project Summary: Wireless? stepper motor control software using embedded WiFi solution. The project will utilize off-the-shelf components for embedded motor control, including a WiFi module (MC+WiFi).? A couple? of different small bi-polar? stepper motors are being used, requiring only simple bi-directional? step? motion contro...am willing to work with a junior person who may not have all the background or skills required, but would be willing/interested in doing research to accomplish the tasks Your Response: - if you are interested in working on this project, please provide enough info about yourself in resume with details of your background as related to this project (Linux/Android, C, embedded programming, WiFi/zigbee/RF, motor control) Thank you for considering this p...

    ₹31177 (Avg Bid)
    ₹31177 Avg Bid
    5 bids

    A hardware device with the following features: - Zigbee ( or similar) - NFC - Touchscreen ( or similar) - eLua ( . The device does not need an OS other than this. - battery - case - USB port for programming & charging - toolchain for programming in Lua. The toolchain should run in Windows (XP - 7) & Unbuntu Linux (Karmic). The device should come with one application, in which users can: 1) share zigbee ID info via NFC 2) send each other text messages ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows

    ₹2501 - ₹416806
    ₹2501 - ₹416806
    0 bids

    I want to develop a cheap slip printer - prints onto a card as the card is swiped (or slipped) past the stationary print head. I am looking for some one to repeat a hack for a conceptual prototype of a slip printer using consumer inkjet printer cartridges. Please refer to held statically in memory, completely time based to start with (i.e. assume average swipe speed and print routine runs based on that) * The circuitry needs to be well documented and the code well commented * Extensions to consider (but not implement): - timing the print by measuring the position of the card - Changing the string printed based on a button selection before swiping - Zigbee or other low-data wireless connection to computer for issuing new strings

    ₹60604 (Avg Bid)
    Featured
    ₹60604 Avg Bid
    17 bids

    We want to promote the Italian section of our blog. A blog on electronics engineering, schematics, microcontrollers, embedded linux, gps, circuits, pcb, mems, fpga, vhdl, zigbee, optoelectronics, c programming, firmware, robotics, audio projects, rf circuits, industrial and automotive electronics and general technology hi-tech sci-tech. - YOU MUST HAVE A BASIC TECHNICAL SKILL - YOU MUST HAVE ITALIAN NATIVE WRITING links requirements: - Blog,forum,newsgroup must be in italian language and the links must be in to the conversation/comments. Insert the link only at the end of the related post-comments-thread - absolutely no only the link (spam)! - do-follow links - links should be from pages related to the categories of our blog - Most of donor pages should be easily indexe...

    ₹2501 - ₹20840
    ₹2501 - ₹20840
    0 bids

    ...buy a few cheap kitchen style balances off ebay (from any country) that could be used in a normal kitchen and make modifications to the balances, and try and neatly package modifications in the casing of the balance if possible. The balances should become 'Wireless Enabled' so they can communicate balance weights as well as unique balance ID to a windows PC. The wireless communication could be Zigbee or anything that is cheap, two way and cost effective allowing more than one device on the network, and whilst if I get you to make more than one balance they should be complete with balance, and pc receiver, it should be able to function with one balance and one receiver, or people be able to have two balances and one receiver. The idea is to make an inter-operable wir...

    N/A
    N/A
    0 bids

    ...buy a few cheap kitchen style balances off ebay (from any country) that could be used in a normal kitchen and make modifications to the balances, and try and neatly package modifications in the casing of the balance if possible. The balances should become 'Wireless Enabled' so they can communicate balance weights as well as unique balance ID to a windows PC. The wireless communication could be Zigbee or anything that is cheap, two way and cost effective allowing more than one device on the network, and whilst if i get you to make more than one balance they should be complete with balance, and pc reciever, it should be able to function with one balance and one reciever, or people be able to have two balances and one reciever. The idea is to make an interoperable wireless...

    ₹75025 (Avg Bid)
    ₹75025 Avg Bid
    3 bids