Firmware Development Jobs

iPhone Battery Management System inside-out and can work across software, hardware, and firmware layers to alter the way battery health data is reported. The goal is to change the internal metrics that feed the Health section in iOS so the device shows revised capacity, cycle count, and related statistics without triggering errors or safety lockouts. Can you make a Custom device that can be use on a factory level,hat helpful to change battery health and cycle by just connecting the battery BMS only. Scope • Reverse-engineer or otherwise access the BMS firmware and its data pathways. • Modify the algorithms or calibration tables that calculate battery health. • Validate the change on real hardware so the phone operates normally under charge, discharge, and idle state...

Hello PCBWay, I need you to design and supply a fully assembled, programmable PCB for a battery-powered motion recorder. I do not have a schematic and cannot solder components myself. Please check whether an existing design could be adapted to reduce the cost. **Shape and size** - Rectangular PCB with rounded corners. - Standard credit-card dimensions: 85.60 × 53.98 mm. - Keep the PCB and components as thin as practical. - A separate flat LiPo battery will sit behind the PCB. Please keep the battery area clear of tall components. **Hardware** - A low-cost, low-power microcontroller that I can program myself. - An onboard 3-axis accelerometer and 3-axis gyroscope. - Two assembled push buttons: 1. Power on/off. 2. Start recording; press the same button again to stop and save. - One pro...

I need a production-ready PCB for an industrial ranging device that will be integrated into larger automation machinery on our factory floor. The board has to combine three core capabilities: robust signal processing of the sensor data, reliable high-power outputs to drive downstream actuators, and on-board wireless communication for status reporting and firmware updates. The footprint must stay within 80 mm × 60 mm, operate from a 24 V DC rail, and meet industrial EMC/EMI standards (EN 61000 family). A multilayer stack-up with controlled impedance traces for the RF section is expected, along with generous creepage/clearance on all high-current paths. Deliverables • Schematic (Altium or KiCad) • Fully routed Gerber/ODB++ files ready for fabrication • Annotated ...

I need a complete electrical design for a true-online 600 W UPS that will operate in a home environment. The scope covers everything from the high-level architecture down to production-ready documentation, so that I can have the unit prototyped and assembled without further engineering work. What I expect you to produce includes: • Full schematic with clearly annotated component values • Bill of materials using readily available parts • PCB layout files (Gerber or equivalent) and 3-D board view • Control logic or firmware source (if a microcontroller or DSP is used) • Mechanical outline showing heat-sink placement, transformer or inductor dimensions, and suggested enclosure size • Brief test plan describing how to verify continuous 600 W output, transfer time...

Embedded Systems / Firmware Engineer Project Description HappyMat(TM) is seeking an experienced Embedded Systems / Firmware Engineer for HappyMat Prototype #1. You will be responsible for the prototype's embedded controller, firmware, sensor integration, LED control, digital display, wireless communications, and associated hardware/firmware integration. Primary Responsibilities • Develop and configure the embedded controller and firmware. • Integrate pressure/presence sensing. • Integrate addressable LED lighting. • Integrate the digital display. • Implement Wi-Fi connectivity. • Implement Bluetooth/BLE connectivity. • Support camera, speaker, and microphone integration. • Coordinate with the IoT/interface engineer where applicable. • Tr...

I have a working draft of a telephony-grade hardware design and I need a seasoned electrical engineer to finish it up. I will supply the current PDFs/PCB files, and a brief block-level write-up. The files contain only basic documentation. Once we agree the hardware is sound, I’ll have a shortlist of component-level questions (why a particular codec, timing tolerance on the crystal, etc.). Clear, practical answers here will decide the final BOM. The next stage is firmware which will bring it to life. I need clean, well-documented code—preferably in C or C++—that compiles under GCC or a comparable open-source toolchain. Deliverables • Answer one question about component substitution • (Later on, next project, after I have a prototype produced) complete firm...

Request for Proposals (RFP) / Freelance Job Specification: Custom Bipedal Humanoid Platform Role Type: Contract / Freelance (Full-system or Module-specific) Location: Remote (Hardware prototyping local or shipped) Engagement: Milestone-based contract 1. Project Overview We are designing and fabricating a custom open-architecture bipedal humanoid robot. The goal is to build a functional, anthropomorphic platform capable of dynamic balance, stable bipedal locomotion, and compliant interaction. Because building a complete humanoid spans multiple disciplines, we are hiring specialized engineers and domain experts. Applicants may bid on the full lifecycle or submit proposals for individual tracks aligned with their core expertise. 2. Specialized Tracks & Scope of Work Track A: Mechanical En...

I’m looking for an electronics / embedded hardware engineer to help turn an existing PI/TDEM hardware design into a working, bench-tested prototype. The project is already substantially developed. I already have the engineering architecture, circuit concepts, component work, connection details, timing approach, and implementation planning. This is not a design-from-scratch project. I mainly need someone who can: - review the existing engineering package only as needed for implementation; - complete or correct schematic/PCB work where necessary; - prepare manufacturing files and BOM; - work with STM32 firmware and ADC acquisition; - handle pulsed MOSFET / inductive coil hardware; - assemble and bring up the prototype; - perform oscilloscope and LCR measurements; - debug the electronic...

# Custom Industrial PLC Hardware & Firmware Development We are looking for an experienced **Embedded Systems / Industrial Electronics Engineer** to design and develop a custom industrial PLC/controller suitable for real industrial environments. The objective is to develop a reliable, professional, manufacturable controller based on a custom PCB, not a hobby-level Arduino or development-board solution. The engineer should have strong experience in industrial electronics, embedded firmware, PCB design, EMC/ESD protection, industrial communications, and microcontroller-based control systems. ## Project Objective Develop a compact industrial PLC/controller capable of handling digital and analog I/O, industrial communications, machine-control logic, and optional IoT connectivity. The ...

The goal is to wire every layer of a new pair of smart glasses—from the on-board sensors right through to an Android companion app—so that the device behaves like a polished, consumer-ready product. Hardware & low-level work • Pair, stream and reconnect reliably over Bluetooth Low Energy while also supporting high-bandwidth features across Wi-Fi sockets. • Drive the critical modules selected for this build: the camera, IMU sensors, plus the speakers and microphones. • Optimise power draw, heat and battery life; handle sleep / wake cycles intelligently. Middleware • Integrate the OEM SDK, which exposes Android libraries first, and bridge any native C/C++ portions that sit beneath those Kotlin/Java calls. • Build or adapt media pipelines f...

I have a Yale electric rim lock already installed and I want to take it a step further by adding three parallel ways to open it: a keypad PIN, an RFID tag/card, and a biometric fingerprint reader. The main driver is day-to-day convenience for family and frequent visitors—no more fumbling for physical keys—so the solution has to be fast, reliable, and easy to maintain. Here’s the scope in practical terms. I need a compact control module—Arduino, ESP32, or any other microcontroller you feel best fits—wired to the Yale lock’s strike mechanism. It must read all three credentials, decide locally, then trigger the solenoid without noticeable lag. A small OLED or LED feedback indicator and a relay or MOSFET driver for the lock should be part of the circuit. Po...

I have an existing advanced mechatronics prototype that was paused during development. I am looking for a senior hands-on engineer to review the current work, complete system integration, troubleshoot remaining issues, and bring the prototype to a stable, test-ready stage. The project combines: • Electromechanical components • High-current power electronics • STM32-based embedded control • Closed-loop/PID control • Multiple sensors • Battery-powered systems • Mechanical structure and custom hardware The main work includes: • Reviewing the existing design and implementation • Integrating electronics, firmware, sensors and mechanical systems • Debugging STM32 firmware and control loops • Tuning PID and system response • Troubles...

Busco un ingeniero de sistemas embebidos para el desarrollo del firmware base de un MVP en fase pre-semilla. El proyecto consiste en la integración en laboratorio de un microcontrolador ESP32 WROOM programado en C++ (FreeRTOS / Arduino IDE) que coordine la lectura de sensores y la activación autónoma de actuadores de seguridad urbana. Requisitos técnicos del sistema: • Gestión de Energía: Modos de bajo consumo (Deep Sleep) y activación por interrupciones físicas GPIO externas. • Integración de Sensores: Matriz térmica I2C (AMG8833), micrófono digital I2S, sensor ultrasónico de distancia, termistor digital DS18B20 y sensor digital de conductividad/presencia de agua (detección de desbordamien...