Structural Engineering Jobs

I have an industrial building project covering roughly 20,000 sq ft and I now need a complete, accurate bar bending schedule (BBS). All reinforcement details must be transferred into my existing Excel template—the file will be shared as soon as we start. I simply need you to extract the bar marks, diameters, lengths, shapes and bend dimensions from the structural drawings and populate every relevant sheet so the cutting, bending and placement teams can work straight from it. Please keep everything inside the template structure; formulas and layout are already set up, so no redesign is necessary. The finished workbook should include: • A summary tab with total tonnage auto-calculated from your inputs • Separate sheets for footing, column, beam, slab and any miscellaneous...

I have a 12.5 ft × 60 ft footprint and want a full set of structure-focused drawings for a two-story house. The emphasis is on accuracy and code compliance rather than architectural styling; in other words, I need clean, build-ready structure drawings. Here’s what I expect to receive: • Dimensioned floor plans for both levels with beam, column, and wall locations • Foundation layout, footing details, and rebar schedule • Roof/framing plan with connection specifics • At least one longitudinal and one transverse section that call out all member sizes • General notes covering loads, materials, and any code references Please deliver everything in both DWG and PDF so I can submit to the local authority and hand straight to the builder. The envelope...

I need a Missouri-licensed architect to prepare full construction drawings for a 1,200 sq ft extension that will convert part of my commercial building into a dedicated garage. The space must comfortably accommodate multiple vehicles; beyond that I’m open to fresh design ideas because the existing structure doesn’t dictate a particular style. Scope • Site visit coordination (virtual or in person) to verify dimensions and local conditions • Schematic layouts showing optimal vehicle flow and clearances • Code-compliant architectural, structural, and basic MEP sheets suitable for permitting in Missouri • Professional seal for the State of Missouri on the final set Acceptance Drawings should meet current Missouri building codes and be ready for cit...

I need two experienced coastal engineers to join my team on an upcoming flood-prevention project in the Caribbean. The work will be carried out on-site, so you must be ready and able to travel for the duration of the assignment. Your background should demonstrate solid, hands-on experience in shoreline protection and marine construction. You will be asked to inspect the existing coastline, design and refine practical defence measures, and remain on location to supervise implementation. All permits and stakeholder arrangements are already in place, so you can focus purely on the technical aspects without the extra layer of local-authority liaison. Key deliverables • A concise site-assessment report highlighting existing vulnerabilities and recommended shoreline-protection techniques....

I am transforming a blank commercial space into a modern-style restaurant and need both the architectural vision and the structural expertise to make it happen safely and efficiently. The dining area, kitchen, and an outdoor seating zone all require detailed evaluation; every wall, column, and canopy has to be verified or redesigned so that style never compromises safety. Sustainability is a must. Wherever possible I’d like recommendations for recycled or rapidly renewable materials, energy-efficient systems, and construction methods that lower the project’s overall footprint without inflating costs. Here is what I will be looking for in the final package: • Architectural concept and code-compliant floor plans that reflect a clean, modern aesthetic. • Full struct...

I want to work one-on-one with an experienced residential structural engineer in Victoria who can guide me through the practical side of townhouse design. My goal is to strengthen my command of overall structural integrity and compliance with local regulations, so every session will revolve around real projects currently on my desk. We will meet by video call once or twice each week, after standard business hours, for 60–120 minutes. During each call I will share the current footing layout, slab plan, beam schedule or retaining-wall detail and ask you to walk me through the calculations, code clauses and reasoning that shape your decisions. I learn fastest when you can sketch on screen, reference the NCC and relevant Australian Standards, and, if helpful, demonstrate software such a...

I have a civil-engineering task that calls for precise calculations, thoughtful design input, and a clear written explanation of the technical choices made. Graphic outputs that illustrate the solution path or final design will also be part of the hand-off. Once we agree to move forward I will share the full brief, but in essence the work centres on applying core civil-engineering principles to a practical problem. Accuracy and clarity are critical; I would like every assumption stated, every step shown, and the final results organised so a non-specialist can follow the reasoning. To be considered, please send a detailed project proposal that outlines: • the specific methods or software you plan to use (AutoCAD, Revit, STAAD, spreadsheets—whatever suits your workflow) &bul...

We are currently shipping our products to Amazon in multipacks and they in turn ship as is to their customers. We would like to look at a few potential insert prototypes which might help to distribute the force of a drop and mitigate some of the damage we have seen given our unique packaging Here’s how I see the project flowing: • Project Kickoff to discuss wants / needs * Structural design: translate my rough sketches into a flat dieline *Discussion with packaging manufacturer • Material specification: recommend the ideal paperboard weight, coatings, and any specialty finishes that balance durability with an upscale look. • Production documentation: final dieline, 3D mock-ups (OBJ or PDF-3D), bill of materials, and press-ready specs for the converter. Timing...

The documents are attached We need to quote for irrigation workd therefore quantities to be calculated accurately. For long term relation we need immediate response with competitive price.

I need experienced professional to certify my roof for a hybrid solar panel system on the sloped roof of my residential house. Key Requirements: - Proper certifications Ideal Skills and Experience: - Engineer licensed in NV to certify my roof - I'll do the work myself, they just need to certify that it can happen

I’m building a finite-element model in Abaqus to replicate a push-out test where steel beams are connected to CLT slabs. The sole objective is to capture and understand the deformation behaviours that develop throughout the load history, rather than ultimate strength or specific failure modes. Here’s what I need from you: • An accurately meshed, non-linear Abaqus model that represents the steel beam-to-CLT connection used in push-out testing (material orthotropy for CLT, contact definitions, appropriate boundary conditions, and loading protocol). • Post-processing that isolates global and local deformations and presents them as clear, publication-ready graphs and charts (force–slip curves, displacement contours, etc.). • All input files, output da...

I need an expert to check the requirements for underpinning a stable concrete retaining wall that is 3 to 6 feet high. Key requirements: - Assess the need for underpinning - Evaluate stability and safety - Recommend materials and techniques Ideal skills and experience: - Civil engineering background - Experience with retaining walls I would like a structural engineers reports on a retaining wall. - Knowledge of underpinning methods

I'm looking for detailed plans to create a concrete porch addition. The primary purpose of this addition is to serve as a personal relaxation space. Requirements: - Design should be suitable for relaxation - Plans should be structurally sound and detailed enough for construction Ideal skills and experience: - Experience in porch and patio design - Knowledge of local building codes and regulations - Proficiency in creating detailed, accurate construction plans Please provide examples of similar work done.

I am seeking experienced Structural, Civil, and MEP Engineers to provide stamping services for multiple residential and commercial projects. Key Requirements: - Expertise in Structural, Civil, and MEP engineering - Ability to provide necessary stamps for engineering drawings - Experience with residential and commercial projects - Knowledge of local building codes and regulations Ideal Skills and Experience: - Professional engineering licenses in relevant disciplines - Proven track record in handling multiple projects - Strong attention to detail and accuracy - Excellent communication skills for coordinating with our team Please provide relevant credentials and experience in your bids.

I’m upgrading an existing building and want a sleek, modern mono-stringer staircase fabricated in metal with a durable powder-coated finish. The structure must fit seamlessly into the current floor plan, respect head-height clearances, and meet local code for strength and safety. I can supply PDF/DWG files of the present layout along with exact floor-to-floor dimensions once we start. What I need from you are dimensioned shop drawings and a 3D model I can hand straight to my fabricator, plus basic structural notes that confirm tread, stringer and connection sizing for the two story staircase. AutoCAD, Revit or SolidWorks files are ideal; hand sketches alone won’t be enough. Deliverables • 3D model illustrating stringer, treads, landings and railing connections •...

I’m preparing a complete, new metal piping network for an industrial facility and need an experienced pipe fitter who can take the project from layout through final pressure testing. All pipe runs are brand-new installations—no existing lines to modify—so accurate measurement, cutting, fitting, welding, and secure anchoring are crucial. You’ll be working exclusively with metal pipe, tying the system into our equipment bays and utility headers while maintaining clear access for future maintenance. I will supply the plans, specs, and on-site support for lifting or hot-work permits; you bring the tools, materials know-how, and the skill to deliver a clean, code-compliant install. Deliverables: • Fully installed metal pipe system built to the provided drawings ...

I regularly receive FrameCAD .dwg files for properties we are building and need fast, accurate pricing so I can turn quotes around to my own clients. Each batch is small—typically one to five drawings—but the files carry complex annotations and the drafting style is never identical from job to job. Here’s how the workflow will look: I’ll email you the drawings together with my current $/lb rate. You review every line, calculate the steel weight, and send back a single figure for the full job plus a short breakdown that shows how you arrived at it. Turnaround must be no longer than 24 hours each time, as I’m often working against tight bid deadlines. Your deliverable every time: • Total calculated weight for all drawings in the batch • Final...

I fabricate porta cabins and now need an optimised design for a new line of office units built from light-gauge steel sections (LGSS). The target footprint sits between 100 sq ft and 300 sq ft and must comfortably accommodate the following essentials: • Workstations • Meeting room • Reception area What I’m looking for A designer or structural consultant who lives and breathes lightweight construction and can translate these requirements into a complete, build-ready package. You should be comfortable working in CAD/BIM (AutoCAD, Revit or similar) and running structural checks in STAAD, Tekla, SAP2000 or equivalent software to make sure the LGSS frame meets national codes for wind load, transport stresses and on-site handling. Deliverables I need to receive ...

I am already in the construction phase of an industrial facility referred to internally as the “MAB.” To keep the build on schedule and fully compliant, I need a professional who can step in right away and guide the remaining works through to completion. Your role will revolve around three core areas: • Site-level oversight to verify that current works match the approved drawings and local industrial codes. • Coordination with the existing contractors and trades, resolving day-to-day clashes before they escalate. • Clear, concise reporting—weekly progress notes, updated timelines, and a punch-list of any corrective actions. If you have a solid background in industrial construction management or site engineering and can work with typical tools such as ...

Hi, I’m currently working on a residential addition to my home in Wake County, NC (county jurisdiction). I’m acting as the homeowner/GC and have a full set of plans that were drawn up and stamped by a PE. I just completed the framing inspection, and there are several corrections/items to be addressed. I reached out to the original engineer, but he’s going on vacation and said it may take a couple of weeks after he returns to review. I’m trying to move this forward ASAP so I can proceed with insulation and drywall and stay on schedule before summer. I will need a stamped letter or engineer’s response to satisfy the inspector. I have the full plans, photos, and a written summary of the items ready to share—can you assist, and what would your turnaround ti...

I’m cutting a 36-inch doorway through a 12-inch concrete block basement wall that currently bears two full stories. Directly above the opening sits a living-room fireplace, and that floor system is framed with joists spaced 12 inches on center. Because of the loading path through the wall, I need a structural engineer to determine the exact size, section properties, and grade of and material type recommended for a lintel lintel that will safely carry the residential loads involved. (I live in Kentucky). What I need from you is a concise calculation package that shows all load take-offs, code references, safety factors, and the final member specification. A brief sketch or marked-up photo locating the bearing points, end-seat lengths, and any required padstones will help my mason ins...

I’m building a new adventure park and need a structural engineer who can take my ropes-course and zip-line concepts all the way from safety calculations to permit-ready drawings. Rough sketches and partial plans already exist for several sections, while other elements still need to be designed from the ground up, so you’ll be switching seamlessly between review/optimisation work and clean-sheet creation. All primary members, platforms, anchor points and connection details will be fabricated in composite materials. If you have previously specified pultruded or moulded FRP profiles, worked with hybrid composite-steel interfaces, or certified composite load paths for dynamic attractions, that’s exactly the sort of expertise I’m after. Your calculations must satisfy cu...

I'm seeking a skilled carpenter or furniture designer to create a foldable wall table primarily for work or study use. The table should be made of pine wood. Key Requirements: - The table must be sturdy and durable, yet easy to fold and unfold. - Space-efficient design is essential, as it will be mounted on the wall. Ideal Skills and Experience: - Expertise in working with pine wood and other types of lumber. - Experience in designing and building foldable or modular furniture. - Attention to detail and craftsmanship quality. - Ability to provide a design mockup and ensure structural integrity. Please include examples of similar work in your portfolio. Thickness 2.5 cm Width 135cm Length 50cm Please provide cable orgnizers on the side of the table. USB- Type C charging port. K...

I have a commercial project that is already past concept and schematic stages, so what I’m missing now is a fully coordinated detailed-design drawing package created in either Revit or AutoCAD. Here’s what I need from you: • Architectural plans, sections and elevations showing dimensions, levels, finishes, door / window tags and schedules • Structural details—including foundations, framing, reinforcements and any typical/critical connections—fully referenced back to the plans • Sheets compiled and ready for permit submission in both native file format (RVT or DWG) and PDF Acceptance criteria: • All views are to scale, cleanly annotated and on a consistent title-block template • Layers / families are organised logically for easy hand-...

I’m looking for a Chartered Structural or Civil Engineer registered in Australia to give professional, NCC-focused advice on a project that falls under Classes 2, 3 and 9. Right now I don’t need full structural drawings or inspections—what I need is targeted consultation that ensures every detail of our concept design will satisfy the current National Construction Code, relevant Australian Standards and any state-specific amendments. Here’s what I expect from our collaboration: • A series of remote or in-person consultation sessions (we can agree on the format) where you review the design intent and flag any compliance risks early. • A concise written summary after each session outlining required code provisions, reference clauses and recommended acti...

This project focuses on the validation of an experimental investigation on a novel Concrete-Filled Steel Tube (CFST) pier-to-foundation connection with tubed RC encasement using advanced finite element modeling in ABAQUS. The objective is to reproduce the experimental/numerical work presented in and verify the accuracy of the FE model by comparing: Load–displacement (load-drift) behavior Failure modes (FM1, FM2, FM3) Stress and strain distribution Lateral resistance and stiffness The ABAQUS model includes: Concrete Damaged Plasticity (CDP) for concrete Steel modeled with elastic–plastic behavior Surface-to-surface contact with friction Embedded constraints for reinforcement Boundary conditions simulating real test setup Validation is performed by comparing FE results with ...

I need a detailed Bill of Quantities for a new residential construction project. The drawings, specifications, and any clarifying notes will be shared as soon as we start, and I’d like you to turn them into a clear, item-by-item BOQ that can go straight to tender. Use the standard method of measurement you are most comfortable with (POMI, SMM7, or CESMM are all acceptable) and structure the document so that every element of work is easy for contractors to price and for me to track during execution. Accuracy in take-offs is critical; please double-check dimensions and flag any missing information before you proceed. Deliverables: • An editable Excel (or compatible) BOQ, grouped logically by trade or work section. • A brief summary sheet showing subtotal per section and t...

I manage a continuous mix of residential and commercial jobs throughout New York and need a Professional Engineer who can step in as my on-call authority for code compliance, plan revisions, and, most critically, official stamping. Most submittals arrive essentially complete, yet municipalities still require a NY-licensed seal or the occasional tweak to satisfy an inspector. Your role is therefore heavier on review, minor revisions, and quick turnaround endorsements than on ground-up design, though the ability to verify structural calculations and spot hidden load-path issues is essential. Typical packages you will receive include: • Blueprints that need your PE stamp • Structural calculation sets for verification and sealing • Site plans requiring last-minute edits an...

I am looking for an architect or building designer, ideally based in Indonesia, to help turn an existing concept into proper architectural plans for construction. I have already completed early cost analysis and have a clear direction on the design intent, layout thinking, and overall approach. I now need someone who can take that concept and develop it into clear, buildable drawings suitable for local construction and consultant coordination. What I need: Architectural drawings developed from an existing 2d floor plan. Floor plans, elevations, sections, and roof plan Clear dimensions and practical build detailing Strong understanding of structural coordination Knowledge of steel framing systems, spans, load paths, and practical construction detailing Ability to think through roof stru...

I need a structural engineer to assess the integrity of an egress stairwell. Key requirements: - Evaluate lower portion of stairwell (after landing to bottom floor) - Existing top half is fine Materials: - Steel stringers - Wood treads -Concrete foundation Ideal Skills and Experience: - Licensed structural engineer - Experience with steel and wood structures - Attention to detail - Knowledge of safety and building codes Please provide a professional assessment letter upon completion.

I need a structural engineer to evaluate the foundation of a residential building. This is required by my mortgage company. The inspection should focus on: - Settlement or sinking issues Ideal skills and experience: - Licensed structural engineer - Experience with residential foundation inspections - Ability to provide detailed reports for mortgage requirements

I need a licensed engineer to stamp our structural designs for a residential building project. Key Requirements: - Review and approve engineering designs - Provide official stamp and signature - Ensure compliance with local building codes Ideal Skills and Experience: - Licensed structural engineer - Experience with residential projects - Knowledge of local regulations and codes Please provide your credentials and relevant experience.

My project is at the planning-and-design stage and I need a qualified structural engineer to take the lead on all calculations, drawings, and code compliance. The scope includes analyzing loads, specifying appropriate materials, and producing fully detailed structural plans ready for permit submission. You will translate my architectural concept into a safe, build-ready structure, coordinating with any other disciplines as questions arise. Please indicate the software you prefer to work in (e.g., AutoCAD, Revit, SAP2000, ETABS) and confirm that your deliverables will include stamped drawings (PDF and DWG) plus a concise calculation report. If you have recent experience designing buildings or infrastructure during the early design phase and can start promptly, I’d like to review...

Only Ontario, Canada licensed engineers need to apply. We are seeking a qualified mechanical, structural, or industrial engineer to design lifting lugs for a DeScaler box. The ideal candidate will have experience in creating safe and efficient lifting lug designs that align with Canadian industrial standards. Your expertise will be crucial to ensure the lifting lugs meet all necessary specifications and safety regulations. Candidates should be detail-oriented and capable of providing innovative solutions. Candidate should be familiar with Canadian standards and weld specifications and have done previous similar jobs. Should be familiar with solid works, Ansys, AutoCad and must be a PEO. If you have a solid background in engineering design, we would love to hear from you! Only Canadian/ US...

Project Description: I need a licensed structural engineer to provide beam sizing calculations and stamped drawings for residential remodels, repeat business. Scope includes: Evaluate an existing load-bearing wall removal Size and specify required beam (LVL/steel) Provide stamped structural drawings/calculations for permit approval Project Details: Residential single-family home Location: Texas, Harris County, El Lago Opening span: Will provide Single story / two story: Single story Attic load / roof only / floor above: Roof load I can provide: Rough floor plan Photos Measurements Site details Requirements: Must be a licensed structural engineer (PE) in Texas (prefer Houston area) Experience with residential beam sizing and permitting. Ability to deliver permit-ready stamped docum...

I’m moving forward with a lot of projects in the United States and now need a partner who holds an active U.S. architecture or professional-engineering license. Your stamp will be used for permit submission, so the jurisdiction must recognise your seal—digital or wet. Scope • Review my existing drawings and notes, confirm code compliance and identify any gaps. • Prepare (or update) plans, details and calculations as required by the local building department. • Sign and seal the final set, along with a brief letter of professional responsibility. Acceptance criteria 1. You provide your current state license number for verification before work begins. 2. All sheets and calculations carry your seal and signature. 3. The package meets the building depar...

I manage a rolling portfolio of residential, commercial, and industrial jobs that range from fresh ground-up builds to complex renovations. To keep pace, I’m looking to partner with professionals who can pick up individual assignments as they arise and carry them from concept to permit-ready documents. Your core contribution will be structural analysis and architectural design. Expect to receive project briefs that may start with a rough sketch, a partial BIM model, or an existing set of drawings needing adaptation. I typically work in Revit, AutoCAD, and—on the analysis side—ETABS or SAP2000, so fluency with at least some of these tools is essential for a smooth hand-off. For each task I will need: • A concise structural analysis report that includes load calculat...

I'm seeking detailed 2D elevation drawings, roof layouts, and structural member layouts for a commercial building project. You will work from an eagle view report and photographs. Requirements: - Accurate 2D elevation drawings - Roof layout detailing all features - Structural member layout (beams, columns, etc.) - Use provided eagle view and photos as primary reference Ideal Skills and Experience: - Proficiency in AutoCAD or similar software - Experience with commercial building layouts - Strong attention to detail and accuracy - Ability to interpret and work from photos and eagle view reports Please provide samples of similar work.

I need detailed construction drawings for a small drive-thru coffee kiosk. The drawings must include: - Electrical layout - Plumbing layout - Structural details Ideal skills and experience: - Architecture or engineering background - Experience with commercial kiosk or small structure projects - Proficiency in creating detailed construction drawings Please include relevant experience in your application. I already have drawings. I just need them reviewed and corrected if need be and stamped for city permit approval.

I have already completed a concise, single-page set of stair-modification calculations for my residence here in Colorado. The file is ready for review in PDF format and, because the changes do not touch any load-bearing elements, the scope is strictly a professional check and seal. If you hold an active Colorado Professional Engineer license, I simply need you to: • Examine the PDF for code compliance and internal consistency, • Add your Colorado PE stamp and signature to both the drawing sheet and the calc page, and • Return the sealed PDF right away so I can file before the end of the week. Timing is critical—ASAP approval keeps my permit appointment on track. When you respond, please reference your Colorado license number so I can verify it with the state...

I’m ready to move ahead with the full structural analysis and design of a new reinforced-concrete residential building and need an experienced structural engineer to carry the project from concept through signed-off drawings. Project outline The architecture is settled; what’s missing is a complete structural package that proves the building’s integrity and satisfies local code. You’ll determine member sizes, reinforcement schedules, and load paths, model the frame, and refine the design until calculations and drawings align. Key expectations • Perform full analytical modelling (ETABS, SAP2000, STAAD, or comparable) for gravity, wind, and seismic loads. • Optimise a reinforced concrete framing system—slabs, beams, columns, shear walls, foundation...

The house will sit on a 30 ft × 40 ft plot and rise three full floors, strictly residential in use. I need a complete package of working drawings that marries a clean modern aesthetic with solid structural detailing so the contractor can start immediately and the plans can pass local approval without back-and-forth. Scope I want one living room, bedrooms, and a kitchen on every level. Beyond that, circulation, services, balconies, and any creative spatial solutions are open to your expertise as long as the modern language is maintained. Deliverables (DWG + PDF) • Architectural: floor plans, roof plan, reflected ceiling plans, four elevations, two building sections, door-window schedule, and focused interior details where kitchens and stairs meet the envelope. • Stru...

I need a Professional Engineer (PE) to provide structural design services and stamp for an existing Office ADU (Accessory Dwelling Unit). Key requirements: - Structural design for an existing structure - Analysis of load-bearing capacity and wind load Ideal Skills and Experience: - Licensed Professional Engineer - Experience with ADU structural design - Knowledge of load-bearing and wind load analysis Please ensure all work complies with local building codes and regulations.

I need an engineer to sign off on a steel ballast support for a residential HVAC condenser. Requirements: - Structural integrity assessment - Professional engineering credentials - Experience with HVAC systems -Familiarity with San Francisco seismic and wind requirements Ideal Skills & Experience: - Background in mechanical or structural engineering - Familiarity with residential HVAC systems - Strong knowledge of steel support structures

My institutional plot in Sector 32, Gurugram already has a sanctioned plan, but I now need the Floor Area Ratio formally increased. All architectural drawings, structural calculations, land-use certificates and previous approvals are in hand, so you will be stepping into a fully documented file. What I need from you • Validate the existing paperwork, highlight any gaps and update the area statements to reflect the proposed higher FAR. • Prepare the complete revision set—re-notified drawings, compliance checklists, justification note and any accompanying affidavits—so it is ready for DTCP/HSVP submission. • Liaise with the competent authority through every stage: online portal uploads, fee calculations, clarifications, site inspections and follow-ups, until...

I'm seeking a skilled evaluator to assess a residential property's (65 Bethany Road, Rolleston) structural integrity in regard to dwelling alterations and installed heat pump. The evaluation should include a compliance check with local building codes. Building Consent 202127 was completed and signed off by Sinotek Engineering. He previously owned this house and signed off on the work himself. My solicitor has advised me to seek an independent review to determine if it was completed to a satisfactory standard. Key Requirements: - Assess work planned and work completed - Compliance check with local building codes - Provide key findings only, no detailed reports Ideal Skills and Experience: - Experience in property evaluation - Knowledge of building codes - Ability to provide co...

I’m looking for a detailer who can take my architectural and reference drawings and turn them into fully coordinated shop drawings for a small-to-medium single-storey building. These drawings are for shop construction and site erection, so every column, beam and rafter must be shown with complete structural information, right down to material specs, finish notes and connection details. You will work exclusively in Autodesk Advance Steel. At hand-over I need two things: a clean set of plotted PDFs ready for workshop and site, and the native Advance Steel model and drawing files so my engineer can review or edit them later. Additionally, you must supply DXF files of all plates and connections that can be laser cut. I will supply: • Architectural plans, elevations and sections ...

I need a qualified structural engineer to evaluate sagging floors in my residential loft. Requirements: - On-site assessment of sagging floor. - Detailed report on structural integrity. - Recommendations for repair if necessary. - Detail if structure can support half bath in the future - Evaluate structural vibrations and noise from temp fan Ideal Skills and Experience: - Licensed structural engineer. - Experience with residential properties. - Strong analytical and reporting skills.

I am in the detail-design phase of a new aircraft and need focused help finishing three intertwined tasks: CAD modeling of the airframe, disciplined material selection, and verification through structural analysis. The high-level geometry, aerodynamic data, and load cases are already defined; what remains is turning those inputs into production-ready 3D models and substantiating every spar, skin, and joint. Here is how the work will flow: • CAD modeling – Clean, parametric 3D models of the wing, fuselage, control surfaces, and primary subsystems, ready for downstream manufacturing drawings. Native files in SolidWorks, CATIA, or Siemens NX plus neutral STEP outputs are required. • Material selection – A trade study covering candidate alloys and composites, with just...

Project: 16 Hayfield Drive High-Performance Residence Style: Scandinavian / Minimalist High-Performance Core Objective: Create a "Builder Set" Blueprints with Stamped Engineering certified for state of Maine along with high-fidelity renderings that are 2021/2024 IRC (MUBEC Compliant) 1. Required Drawing Set • 3D Perspective & Renderings: Must include both Exterior (showing site topography and standing seam roof vertical tongue and groove siding) North, South, East, and West views showing finished grades, door and window placements. Interior views. Interior renderings must specifically demonstrate layered lighting effects, fixtures and furniture layout. • Floor Plan with Dimensions: Sourced from provided layout CAD plans. Detailed layout including all structur...