
Closed
Posted
Paid on delivery
I have an STL created by another freelancer that refuses to print cleanly on my brand-new Qidi X-Plus II (Qidi 5). Layers start well, then the nozzle seems to drift in XY and the part continues a few millimetres off-track. I also see plenty of unsupported overhangs that sag before the shift even happens. What I need first is a clear verdict on whether the model itself is the culprit. Please open the file, examine wall thicknesses, overhang angles, bridges, and any hidden non-manifold edges. I’m only after advice right now, not a redesign, so keep the geometry intact and focus on diagnosing printability. The most helpful feedback will pinpoint exactly which features are hard to print on an FDM machine and why. If you can highlight those sections—screenshots with annotations or a short video capture of your slicer preview would be perfect—I can decide whether to tweak the model, change orientation, or adjust support strategy. Deliverable • A brief report (PDF, doc, or annotated images) showing the problematic areas of the STL and explaining why they fail on an FDM printer, with any quick wins I can try in the slicer. Feel free to use your preferred slicer (PrusaSlicer, Cura, Qidi Print, etc.); just mention the settings you referenced so I can reproduce your findings.
Project ID: 40791152
50 proposals
Remote project
Active 6 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
50 freelancers are bidding on average £20 GBP for this job

Hello, i am ready exited to work you as i read your job description I am also an expert in making 2d,3d modelling and animating characters 2dautocad drawing ,elevation, solid work, Revit ,FBX ,Unity, Render also interior and exterior design. I have experience in field of more than 10+ years. I can Create Intro and Explainer Videos. for products and companies. Kindly check My Portfolio as well. Hope for your very soon reply. Thank you
£65 GBP in 2 days
7.9
7.9

My extensive hands-on experience with both filament and photopolymer 3D printing makes me well suited to diagnose whether your STL or print setup is causing the failures on the Qidi X-Plus II. I work with 3D modeling, 3D model preparation, and 3D printing, so I can assess the geometry from an FDM printability perspective rather than only checking whether the file opens. I can inspect the model for wall thickness, unsupported overhangs, bridge lengths, likely sagging areas, and hidden non-manifold or other geometry problems. I will keep the geometry intact and provide a clear report with highlighted problem sections, annotated images or slicer-preview captures, explanations of why each feature is difficult to print, and practical slicer adjustments you can reproduce. My experience with 3D modeling, SolidWorks, 3D design, and filament printing also helps distinguish model-related issues from orientation, support, or slicing concerns. I would be glad to review the STL and give you a concise, actionable printability diagnosis before you decide whether any redesign is necessary.
£20 GBP in 7 days
7.9
7.9

Hello, Your STL sounds like it needs a proper printability audit, especially with the drifting layers and unsupported overhangs on an FDM setup like the Qidi X-Plus II. I’ll inspect the file in a slicer and check wall thickness, overhang angles, bridges, and any non-manifold or problematic geometry without changing the model. Then I’ll mark the exact trouble spots with annotated screenshots and a short report explaining why they may fail, plus a few slicer-side fixes you can test immediately. Please have a look at our Freelancer portfolio through the links given below. https://www.freelancer.com/u/CreativeDesign50 I can deliver the findings in PDF or annotated images, depending on what you prefer. Best regards Kirandeep K.
£16 GBP in 1 day
6.5
6.5

Your STL can be diagnosed by someone who understands both clean topology and real 3D-printing requirements. I have 4 years of Blender experience specializing in 3D print-ready modeling, including optimizing geometry, checking models in a slicer, and identifying issues that can prevent reliable printing. I will inspect the model for wall thickness, unsupported overhangs, bridge lengths, problematic geometry, and hidden non-manifold edges while keeping the existing design intact. My 3D modeling and 3D printing background allows me to distinguish model-related problems from slicer or support issues, including areas that may contribute to sagging or unexpected toolpath behavior. I can provide a concise report with annotated images or slicer-preview captures, explain why each highlighted feature is difficult for FDM, and include the referenced slicer settings and practical adjustments worth trying. I am ready to review the STL carefully and deliver clear, actionable printability feedback so you can decide whether to change the orientation, supports, or model.
£15 GBP in 1 day
5.7
5.7

Hey there, I read your project details, so I understand you need a technical printability assessment of an existing STL that is experiencing XY layer shifts and unsupported-overhang failures on your Qidi X-Plus II, without modifying the original geometry. Could you please share the STL file, your nozzle diameter, layer height, material, print speed, and slicer settings, etc.? If possible, please also provide photos of the failed prints and your slicer preview so I can distinguish potential model-related issues from printer, motion, adhesion, or slicing problems. So I can help inspect the mesh for non-manifold edges, wall thickness, overhang angles, bridge spans, and unsupported features, then prepare a concise diagnostic report identifying problematic regions and explaining why they may fail during FDM printing. I can include annotated screenshots, recommended print orientations, support strategies, and specific slicer adjustments to test. I’ll keep the geometry unchanged and clearly distinguish confirmed mesh defects from potential printer or process issues, since XY layer shifts can also result from mechanical or motion-related problems rather than the STL itself. Thanks!
£11 GBP in 1 day
5.1
5.1

Hello, I can inspect your STL for FDM printability issues and provide a concise diagnostic report without modifying the original geometry. I will check wall thicknesses, overhang angles, bridge spans, mesh integrity, non-manifold edges, and other potential geometry-related problems. I will also review the likely causes of the XY layer shift and distinguish model-related issues from possible printer, belt, or slicer settings problems. My deliverables will include annotated screenshots identifying problematic features, an explanation of why they may fail during printing, and practical recommendations for print orientation, support placement, and slicer settings using Cura, PrusaSlicer, or QIDI Print. I will preserve the original STL and focus entirely on diagnosis rather than redesign. The report will help you determine whether the main issues come from the geometry, support strategy, or printer setup. I can start as soon as you provide the STL file.
£20 GBP in 1 day
5.2
5.2

Understanding: You want a clear verdict on whether the STL is print-ready for an FDM printer, without redesigning the geometry. I’ll diagnose wall thickness, overhangs, bridges, and hidden non-manifold edges while keeping geometry intact. Key steps: • Inspect geometry for minimum printable thickness against the nozzle and common FDM stress points. • Check overhang angles, bridging gaps, and unsupported spans; annotate findings with screenshots. • Detect non-manifold edges and other topological issues; provide quick checks you can reproduce. • Deliver a concise PDF/report with identified issues, why they fail, and quick wins for Cura/PrusaSlicer (orientation, wall tweaks, support strategy, and bridging). • If helpful, include a short 3D-visual explainer to illustrate printability using non-destructive visuals. Deliverables: annotated report (PDF/DOC) with screenshots, a short slicer-preview video, and a list of tested quick wins. Timeline & Budget: Price: £10 (within £10-£20); Delivery: 4 days. I’ll keep the geometry intact and deliver concise, actionable guidance you can use immediately. Could you share the STL's wall thickness distribution and the Qidi X-Plus II nozzle calibration (nozzle size, layer height, and bed level) to isolate whether the issue arises from geometry or printer calibration? Portfolio: See my development/technical portfolio for related project work; sample links available in my Freelancer profile.
£10 GBP in 4 days
5.0
5.0

I can inspect your STL for FDM printability issues without modifying the original geometry. I’ll check wall thicknesses, overhangs, bridges, mesh integrity, and non-manifold edges, then identify features that may require supports or a different print orientation. I’ll also investigate whether the geometry could contribute to the failures and distinguish model-related issues from possible printer or slicer settings. You’ll receive a concise diagnostic report with annotated problem areas and practical slicer adjustments. Portfolio: https://www.freelancer.com/u/mahadhasan012 Thanks, PIXORA STUDIO
£15 GBP in 1 day
5.1
5.1

Hi, I can help diagnose your STL and pinpoint why it’s failing on your Qidi X-Plus II. With 5 years of relevant experience in FDM print analysis and slicer troubleshooting, I’ll inspect wall thicknesses, overhangs, bridges, and any non-manifold geometry while keeping the model intact. I communicate clearly, so you won’t need to over-explain your requirements. I’ll review the file in your preferred slicer, reference the settings used, and provide annotated screenshots or a short preview video showing the exact problem areas and why they’re likely causing drift or poor support behavior. If you’d like, message me privately and I’ll take a close look at the STL details. Best regards, Muhammad Ubaid
£10 GBP in 2 days
4.7
4.7

I can inspect your STL for non-manifold edges, wall thickness issues, steep overhangs, unsupported bridges, and geometry that may cause FDM printing difficulties. I’ll keep the original geometry intact and provide a concise diagnostic report with annotated screenshots, likely failure causes, and practical slicer adjustments for your Qidi X-Plus II. I’ll also distinguish model-related issues from possible printer, calibration, or motion-setting problems behind the XY shifts.
£15 GBP in 7 days
4.7
4.7

Your STL needs a 3D printing specialist who can distinguish model-related failures from slicer or machine issues. I work with Blender and CAD to create accurate, print-ready STL, STEP, OBJ, and 3MF models, with practical experience optimizing wall thickness, reducing supports, and preparing parts for FDM printing. I can inspect the model for thin or inconsistent walls, excessive overhangs, difficult bridges, unsupported sections, and hidden non-manifold geometry while keeping the original design intact. Using Cura or Bambu Studio, I can review the sliced preview and provide annotated images or a concise report identifying where the nozzle may lose a clean path and which features are likely to sag. I will also reference the slicer settings used and include practical orientation, support, and print-setting adjustments you can reproduce on your Qidi X-Plus II. I’m ready to provide a clear, geometry-focused diagnosis so you can decide whether the issue is in the STL, orientation, supports, or slicer settings.
£10 GBP in 1 day
4.5
4.5

Hi there ! My experience in 3D printing and design for manufacture makes me well suited to determine whether your STL is causing the Qidi X-Plus II print failures. I can inspect the model for wall thickness, unsupported overhangs, bridges, orientation-sensitive features, and hidden non-manifold edges while keeping the geometry unchanged. My mechanical and product-design background, supported by 3D CAD and SolidWorks skills, helps me assess not only whether the file is technically valid, but also which features are impractical for FDM production. I can provide annotated screenshots or slicer-preview captures showing the exact problem areas, along with a concise report explaining the likely causes of sagging and the apparent XY shift, plus practical slicer adjustments to test. I will reference the slicer and settings used so you can reproduce the findings on your Qidi setup. Choose me for a clear, print-focused diagnosis rather than an unnecessary redesign. Thanks & regards Gaurav Sharma....
£10 GBP in 1 day
4.3
4.3

I can inspect your STL for wall thickness, overhangs, bridges, and non-manifold geometry to identify potential causes of print failures without changing the original model. I’ll focus on FDM printability and provide annotated screenshots with practical slicer recommendations. Which filament, nozzle size, and layer height are you currently using? Could you share your budget and preferred timeline? I’ll do my best to accommodate your requirements, budget, and schedule.
£17 GBP in 2 days
4.5
4.5

Hello! Your STL printability report with annotated images, delivered within 24 hours after your file arrives. You pay us nothing until you've seen it. Here is what you get: • A clear verdict on whether the model itself causes the XY shift and the sagging • Wall thickness, overhang angle, bridge and non-manifold checks, each problem area marked on annotated images • Quick wins for the slicer (orientation, supports, speeds), with the exact settings we used so you can reproduce them • A short PDF, geometry untouched, no redesign Good to know: an XY drift mid-print is often a printer or belt issue, not the model, so the report separates what the file causes from what the machine may cause. ✅ Included: one round of follow-up questions, and we fix any mistake of ours for free. Price: £12 for the whole report, 40 % off our regular £20, our introductory price. Could you send the STL in the chat, plus the layer height and nozzle size you printed with? P.S. Oldrich, the owner, directs the work and stands behind every result. We work with the help of modern technologies, including AI, which keeps us fast and precise.
£12 GBP in 2 days
3.2
3.2

Hi I can do it Send me file so i can start the project right now ................................................................Thank You
£10 GBP in 1 day
3.9
3.9

EVEN IF YOU DON’T HIRE ME, YOU'LL WALK AWAY WITH A FREE CONSULTATION. It sounds like the STL has serious challenges for your Qidi X-Plus II, especially related to unsupported overhangs and potential non-manifold edges. I’ll evaluate the model for wall thickness, overhang angles, and any hidden issues impacting print quality. My goal is to help you pinpoint the parts causing failures on FDM machines. You'll receive: - Annotated screenshots highlighting problematic areas - A brief report detailing common FDM issues and quick fixes in your slicer While I might be newer to Freelancer, I have over 5 years of experience diagnosing printability issues and numerous 5-star reviews to back it up. Let’s connect for a no-obligation consultation to discuss your project further. You’ll gain insights regardless of your decision. Kind regards, Carly Z.
£10 GBP in 3 days
2.9
2.9

Diagnosing STL geometry and FDM printability is a strong match for my 3D printing, 3D CAD, and 3D modelling experience. I can inspect the model for wall-thickness problems, difficult overhangs, bridges, unsupported sections, and hidden non-manifold geometry while keeping the original design intact. My CAD background with SolidWorks, Fusion 360, AutoCAD, and CAD/CAM allows me to assess whether the XY shift is likely related to the STL or whether it may instead come from printing, slicing, or support conditions. I will provide a concise report with clearly identified problem areas, annotated images where useful, and practical slicer adjustments such as orientation, support strategy, and relevant print settings. I can also reference the slicer settings used so you can reproduce the findings on your Qidi printer. I am committed to delivering a clear, professional diagnosis that helps you decide whether to modify the model or adjust the print setup. Choose me for a careful STL review focused specifically on actionable FDM printability issues.
£12 GBP in 1 day
2.8
2.8

Hello, I understand you need a careful review of the STL to determine whether the model itself is causing the print issues on your Qidi X-Plus II. I’ll inspect the file for wall thickness, overhangs, bridges, and any hidden non-manifold or geometry problems, then provide a clear diagnosis without changing the model. I will also point out the exact areas that are likely to fail on an FDM printer and explain why, using annotated screenshots or slicer preview evidence for clarity. I have strong experience in matching job skills involving STL analysis, FDM printability checks, slicer diagnostics, and identifying geometry issues that affect real-world printing. I focus on practical, actionable feedback that helps clients quickly decide on orientation, supports, or slicer adjustments. Please review my portfolio: https://www.freelancer.com/u/AMSSolutions I’ll ensure clear communication throughout the project and keep you updated if anything notable appears during the review. I’m excited to hear from you and help troubleshoot this file. Best regards Asma M.
£15 GBP in 1 day
1.2
1.2

I will thoroughly analyze your STL file focusing on wall thickness, overhangs, bridges, and non-manifold edges without altering the geometry. Using slicers like Cura or Qidi Print at your specified settings, I’ll identify exactly which features cause printing defects on your Qidi X-Plus II. Here is my approach: 1. Inspect the STL for wall thickness consistency and potential weak points. 2. Evaluate overhang angles and bridging areas for unsupported features prone to sagging. 3. Detect any hidden mesh errors like non-manifold edges that can confuse the printer. 4. Generate annotated screenshots or a slicer video preview highlighting problematic zones. 5. Prepare a concise report explaining why these features challenge FDM printing and suggest immediate slicer tweaks or orientation changes for quick wins. You’ll receive a clear, actionable report (PDF or doc) ready to help you decide next steps with minimal guesswork. I’m confident this focused diagnostic will give you the precise feedback you need to improve print success. Looking forward to assisting you! Best regards, Uzair
£15 GBP in 7 days
0.9
0.9

Hey there, I'll create a clear printability assessment of your existing STL, checking wall thicknesses, overhang angles, bridges, and non-manifold geometry to identify features that may cause sagging or printing difficulties. The report will highlight problematic areas and suggest practical slicer adjustments without changing the original geometry. The findings will be presented in a concise, easy-to-follow report with relevant annotations and the slicer settings used for reference. The focus will be on identifying likely model-related issues and distinguishing them from potential printer or calibration problems. Best regards, Tooba S
£15 GBP in 2 days
0.6
0.6

Hove, United Kingdom
Payment method verified
Member since Apr 7, 2020
£10-20 GBP
£10-20 GBP
£10-20 GBP
£20-250 GBP
£20-250 GBP
$250-750 USD
₹1500-12500 INR
$30-250 USD
$10-30 USD
₹37500-75000 INR
₹750-1250 INR / hour
₹750-1250 INR / hour
$30-250 USD
$10-30 USD
$25-50 USD / hour
$30-250 AUD
₹600-1500 INR
$30-250 CAD
$30-250 USD
$20 USD
₹12500-37500 INR
₹600-1500 INR
$150-300 AUD
₹12500-25000 INR
$30-250 USD