Find Jobs
Hire Freelancers

Design a PCB for me that works

$250-750 AUD

Closed
Posted about 9 years ago

$250-750 AUD

Paid on delivery
Brief for the Control Unit is as below. Do not apply if you cannot design the PCB to work as needed, cannot supply the PCB design files, or cannot provide a detailed components list etc. I will accept the best quality and lowest price. Serious bids only. Unit workings explained: There are to be 3 buttons used on a remote controller to control the PCB ( Top 1 for forward, Middle 1 for stop, and Bottom 1 for backwards).Attached to the PCB will be a 9v battery to power the unit, a 9v motor to move the part, and 2 limit switches (5amp 250VAC). When the top button is pressed the signal will be sent from the remote to the PCB which will then move the motor forward. The motor must continue to move forward until either the middle button (the stop button) is pressed or until limit switch 1 is pressed. When the bottom button is pressed the motor runs backwards until the middle stop button is pressed or until the limit switch 2 is pressed.. which ever comes first. Guild lines: - Parts and components MUST be easily sourced and MUST be cheap! - PCB to use as few components as possible (to allow lower cost when in production and to allow less soldering time needed saving money) - I will also need the PCB files so we can send it off to have thousands printed after prototype + I will need the components list. - PCB to be single sided, single layered ONLY. - PCB to be no larger then 50mm x 40mm with 2mm boarder (no components etc on boarder - so build area is only 46mm x 36mm). - The PCB size is very strict. After this PCB is made and works I will need you to also make another 2 versions. They will both do the same thing as this PCB does, but instead of using the remote controller like this one does 1 of them will use Bluetooth (will have an app made) so it can work from a phone. The other will work via wi-fi so it can be controlled from anywhere in the world. IMPORTANT; THAT ALL 3 OF THESE PCB CHIPS ARE THE SAME SIZE AND FIT INTO THE 46mm x 36mm SIZE LIMIT. What you need to do: Design the PCB to work as per the explanation at the top. Then build it and ship it to me for testing (optional). It must be a fully 100% working unit before shipping so send a video of it working. When you design the PCB keep in mind the parts I already have. You will have to ask for this information.
Project ID: 7203062

About the project

33 proposals
Remote project
Active 9 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
33 freelancers are bidding on average $677 AUD for this job
User Avatar
hi sir i am an expert electrical engineer I can do it for you. I have almost 5 years of experience in this PCB design. Please reply with the software you want me to use and format of gerber files you need. I am waiting for your reply to start, Please reply as soon as possible. Regards
$444 AUD in 10 days
4.9 (251 reviews)
7.9
7.9
User Avatar
I am working as Lab Engineer at FAST National University Pakistan, in Electrical Department, I have conducted the followings Labs, and also supervised Projects related to these labs. 1. Circuit Analysis and Design (Matlab & Simulink) 2. Digital Logic Design (Verilog, VHDL) 3. Computer organization & Assembly Language (8086 processor, 8051 controller) 4. Electric Machines 5. Control System Design etc. I assure you, if you assign your project to me, you surely gonna work with me in future.
$500 AUD in 5 days
4.8 (278 reviews)
7.2
7.2
User Avatar
Hello! We can do for you all your task. We already worked with Bluetooth, Wi-Fi, have big expierense in prototyping and mass production. If you are interested, please contact us and we will discuss details. Best regards, Oleksandr.
$526 AUD in 15 days
4.9 (34 reviews)
7.2
7.2
User Avatar
I make PCB with optimal placement and choice of components. Single-layer PCB - no problem. I have works to control semiautomatic mechanisms, I can realize the necessary functions on your device.
$432 AUD in 15 days
5.0 (40 reviews)
6.4
6.4
User Avatar
Hello, I have been associated with Hardware design (Circuit / Electronics design), PCB design, PCB Manufacturing, Component procurement, PCB Assembling and Functional testing for over 7 years. I have used various CAD/EDA tools for PCB design. Would you prefer any specific EDA tool for PCB design (or) any tool is okay? I will provide the PCB Manufacturing, Component procurement, PCB Assembling & Functional testing services too. I would like to take this up and are fully equipped to deliver the required files. So, if you'll give me a chance to take part to your work, I will respond in the same manner, handling you good quality projects, as soon as possible. I look forward to hearing from you! Wish you a nice day! Thanks & Regards, Karthik
$750 AUD in 15 days
4.8 (126 reviews)
6.7
6.7
User Avatar
Hello, Have a nice day. If you are looking for high quality PCB design and prototype we are here to serve. Following will be deliverable. 1. Schematics 2. Bill of material from Mouser or digikey or farnall or any other international supplier. 3. PCB design in Proteus. 4. 3D rendering of PCB 5. Firmware of microcontroller 6. Box / casing 7. Prototype shipped. furthermore we will give a demonstration on skype to make sure that every thing works as per requirements. Please feel free to contact. Best Regards, Shahbaz.
$1,000 AUD in 15 days
4.6 (51 reviews)
7.0
7.0
User Avatar
hello you need two PCB, one for the three buttons and one for the motor and the limit switches. we can make before a simulation test with proteus. thanks
$470 AUD in 3 days
4.7 (46 reviews)
5.9
5.9
User Avatar
Предложение еще не подано
$555 AUD in 3 days
5.0 (46 reviews)
5.8
5.8
User Avatar
Hello. Device you needed is possible to fit in specifyied size, but wifi and bluetooth modules may require some space, so HEIGHT of device (especially with 9V battery) may be significant. I have big experience in PCB design and microcontrollers, also i'm write programs for Android so i can make that device. (if you needed software for IPhone also - we may discuss about that job with creation of additional milestone). You write about controlling device throgough Internet by WiFi. That's not so simple. Usually, for similar tasks WiFi just provide 'rf-remote' service, similar to Bluetooth, but with longer distance (inside the same WiFi network). For controlling from device, placed in Internet (outside of local network) some additional steps required (obtaing of fixed IP-address, ajustment of local router or usage of some server, placed in Internet). Only last variant (server) is possible to use without some user's efforts. I'm interested in that project and propose to produce working prototype (with demonstration in Skype). WBR Maxim
$250 AUD in 14 days
4.8 (57 reviews)
5.5
5.5
User Avatar
Hi, I have more than 10 year experience in embedded systems and motor control. Will be able to help you on this work plesae let me know if you are interested. regards, Ratheesh
$777 AUD in 20 days
5.0 (8 reviews)
4.6
4.6
User Avatar
I have seen and understand your requirements please open chat window to discuss further ----------------------------------------------------------------------------------------------------------------------------
$480 AUD in 10 days
4.4 (36 reviews)
5.2
5.2
User Avatar
Hi, The basic outline of what you are asking for seems quite straightforwards and well within our capacity to deliver. Specific details will be required especially as your PCB size constraints assume you already have mounting locations and enclosure restrictions. A working prototype can be built and demonstrated on video or sent to you directly. Once you are happy with that I would suggest that the production docs are done including the BOM and a prototype using that documentation produced. This method can sort out a great many issues with fit and assembly. Single sided PCB is NOT always the least expensive solution as it almost always results in installing jumpers or using thru hole parts. The least expensive path is usually surface mount, assembled with pick and place and no human intervention at all. Your current parts list/ stock list would be appreciated. How did you plan to link the remote to the PCB? Regards and good luck. James Harrison-Smith INFONICS (Sydney)
$666 AUD in 10 days
4.6 (13 reviews)
5.0
5.0
User Avatar
Looks like I am the perfect candidate for this job. Previously I have design control circuit for stepper motor, dc motor and servo motor. I have also design experience with HC-05 Bluetooth module and ESP series WiFi module. I design PCB using Altium Designer and Eagle. I could do projects quickly yet still provide professional reliable results with FREE TECHNICAL SUPPORT after delivery. So give me a holler and see what I can do. Best Regards Rahman
$700 AUD in 8 days
5.0 (7 reviews)
4.1
4.1
User Avatar
Hi, I am interested to work on this job. Over 4 years, I am working as a Circuit and PCB designer. I have developed too many circuits and there are 15 applications I have developed in a year and 200+ PCB layouts in this year. I have understood your requirement and it seems that I can do this job. If you are interested to or willing to discuss with me, then kindly reply back to me. Thanks. Chirag
$777 AUD in 15 days
5.0 (7 reviews)
3.9
3.9
User Avatar
A proposal has not yet been provided
$535 AUD in 10 days
3.3 (13 reviews)
5.8
5.8
User Avatar
H, I can provide a quality design. Have a lot of experience in digital board design. As you said, I will design it with your components (and pick cheap ones) I will test it and send you working prototype. One clarification: you need 1 pcb for remote purpose with 3 buttons and 1 PCB to receive the transmitted data and drive the motor, correct Amir
$3,500 AUD in 60 days
4.7 (3 reviews)
3.8
3.8
User Avatar
Hello Mate! I am an Electronics Engineer Specializing in Wireless Products. Your project is super simple and can be done very fast. Even the Bluetooth and Wi-Fi versions i already have projects similar to what you need set up in my laboratory and could easily demonstrate those to you if you would like to do business together. By the way your board requirements are plenty! All of the Transmitter / Receiver Circuitry can fit in a space of 15mm x 20mm. RF, Bluetooth and Wifi can all fit in this space. RF can be singled sided but Bluetooth and Wifi will require multi-layer boards do to high frequency circuit requirements. I live in Hong Kong so it will be super easy for me to do prototype pcbs for you. Also i own a 3D printer hand have many rapid prototyping contacts so if you need enclosure fab or 3D designs i can definitely help you out! Here is what i can provide: Firmware, Circuit Design and PCB Layout: (RF Version) $500AUD Single Layer Rapid Prototype (Remote & Receiver) $150AUD Reproduction cost is $4-$5 @ 1k/pc Firmware, Circuit Design and PCB Layout: (BT Version) $300AUD (after RF Design above) 2 Layer Rapid Prototype (Remote & Receiver) $175AUD Reproduction cost is $8-$9 @ 1k/pc Firmware, Circuit Design and PCB Layout: (Wifi Version) $300AUD (after RF Design above) 2 Layer Rapid Prototype (Remote & Receiver) $175AUD Reproduction cost is $15-$17 @ 1k/pc What part of Australia are you from? Melbourne? My family is in NZ Regards, Dale Schroeder ME/EE
$500 AUD in 7 days
5.0 (1 review)
3.5
3.5
User Avatar
Relevant Experience and Qualifications: I am expert in Schematic design , Firmware development , PCB design & PCB assembly process. I also expert in arduino and PIC microcontroller embedded system design. I currently using Altium Designer 10/Cadence Allegro/Fritzing/Proteus VSM/Eagle/Kicad/Orcad 10/AutoCad 2013 Electric/Solidwarks 2013 / Mentor Expedition as my design software. For manufacturing side i have experience more than 10 years in PCB Assembly with Samsung and Celestica. I have assemble many board for Honeywell and Samsung Electronic. For Honeywell, we assemble Aerospace product. The end customer for this product is Boeing and Airbus. For Samsung, we assemble Microwave oven product. I have nearly 20 years experiences in electronic design and PCB assembly business. Below is some project list that we involve in assembly and design activity : - Black box- Honeywell- system - 6 model - Navigation-system - 50 model(Military/aerospace- Honeywell) - Microwave oven. - 200 model ( Samsung/GE Electric ) - UPS 600 Watt and 1200 watt - 2 model(Industronics Behad) For some small NON-NDA Project, you may see it Sample product . See attachment. Let discuss more Approach to the Job: We do support electronic design till mass production activity and repair pcb acitivity. Please refer attachment for our soldering quality.
$750 AUD in 15 days
5.0 (2 reviews)
2.8
2.8
User Avatar
I have great experience in PCB design and I am able to use Eagle Cadsoft and Altium Designer. I am very reliable person and you can count on me.
$250 AUD in 10 days
5.0 (1 review)
1.4
1.4
User Avatar
A proposal has not yet been provided
$555 AUD in 20 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of AUSTRALIA
Gold Coast, Australia
5.0
10
Payment method verified
Member since Sep 17, 2014

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759) & Freelancer Online India Private Limited (CIN U93000HR2011FTC043854)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.