Find Jobs
Hire Freelancers

Circuit design for 4-20mA Loop Current Sensor -> 3.3V ADC

$30-250 SGD

Completed
Posted about 10 years ago

$30-250 SGD

Paid on delivery
Need to create the schematics and PCB design for a circuit that runs off 3.3VDC power source and is able to convert the signal from 4-20mA 12VAC loop current sensor devices to a range of 0-3.3V DC that can be read by the microcontroller. Parts should be selected to maximize ratio of SMD. 4-20mA sensor will be connected via BNC connector. The output should be screw terminal with GND, VCC (3.3v), and SIGNAL. Design should be in Protel or Altium Designer. Deliverables should be in the form of schematic file, PCB design file, BOM, and gerber. An example of what we are trying to create is here: [login to view URL] More resources can be found at the bottom of this page: [login to view URL](4-20mA)_sensor_output Please note if you have previous experience designing circuits for 4-20mA current loop.
Project ID: 5512229

About the project

14 proposals
Remote project
Active 10 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
Awarded to:
User Avatar
Hello. I engaged in your task and soon I will show implementation for you.
$150 SGD in 3 days
5.0 (8 reviews)
4.0
4.0
14 freelancers are bidding on average $216 SGD for this job
User Avatar
A proposal has not yet been provided
$444 SGD in 10 days
4.9 (29 reviews)
5.9
5.9
User Avatar
I have 14 year experience in electronics and system designing therefore am very confident that I can do this project,following shall be the milestones: 1. Specification requirement document. 2. Schematics using Altium 3. PCB Art work in Altium (Not the Physical PCB) 4. Simulation of code and electronics (Where ever possible) 5. Software delivery. About my self , you can review my profile and my clients comments. Thanks.
$526 SGD in 20 days
4.9 (11 reviews)
5.5
5.5
User Avatar
A proposal has not yet been provided
$244 SGD in 3 days
4.4 (23 reviews)
5.1
5.1
User Avatar
Hello, i can provided the services. I will use Proteus, to design the PCB, (since Altium is too expensive to purchase) The gerber files generated will be standard and can be viewd with any geb tool. Please feel free to contact. Best Regards, Shahbaz.
$250 SGD in 20 days
4.9 (20 reviews)
4.8
4.8
User Avatar
Hi, My background includes a lot of instrumentation design for low level measurement including strain gauges, pressure transducers and other transducers. I have worked with 4-20mA devices previously. Key components are the shunt resistor and the associated amplifier. Driving down to 0V and to 3.3V is possible ( within a few millivolts) froma 3.3V supply using rail-to rail input and output op amps. This suggests that you are using Vcc or Vca as the reference for your ADC inside the micro. That is ok but accuracy is dependent on Vcc/Vca. What accuracy are you trying to achieve? Can you live with 0-20mA equating to 0-3.3V and then offsetting in software or do you want 4-20mA = 0 to 3.3V? Best regards Marc
$244 SGD in 10 days
5.0 (7 reviews)
4.5
4.5
User Avatar
I am an Electronics Engineer with extensive experience of PCB designing and manufacturing. I have been working on Altium Designer for a long time now. I also have experience of manufacturing PCBs using LPKF prototyping tools. Me along with my fellows, we work in a group. We have been designing and making instrumentation circuits for the local industry for 2 years now and you know 4-20mA current loop is industry standard. Hence, this task is a piece of cake for us. We are well aware of concepts like EMI-EMC , design for manufacturability etc. As an example, we designed an cheap PTC-100 to 4-20mA converter circuit from locally available components to reduce cost. We are equally flexible with both SMD and through hole types.
$100 SGD in 2 days
5.0 (13 reviews)
3.8
3.8
User Avatar
Hi You I have more experience with analog amplifier design. I'm using altium designer for pcb design. Hope to done this for you!
$100 SGD in 3 days
4.9 (4 reviews)
2.7
2.7
User Avatar
Hi, I can help with the project. Can do it in Altium 14. See my profile there is an example of Altium design implemented. Regards, DSnejko
$150 SGD in 5 days
5.0 (2 reviews)
2.1
2.1
User Avatar
I have done current loop projects for transducers which were designed for aerospace. Will be able to complete the project within 4-5 working days.
$200 SGD in 4 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I'm an engineer from Hungary with 3+ year HW and FW design experience. I am new in freelancer.com, and this project could be a good start, but I successfully finished several PCB design in a company where I am working (audio, testers to industry, linux board design, etc). Using INA216 or something similar the conversion is quite easy, so the design would be fast. I hope I didn't miss your problem. I'm ready to discuss design details, and approx. times.
$200 SGD in 3 days
0.0 (0 reviews)
0.0
0.0
User Avatar
What is the 12 Vac bit do you mean it is the supply to the system,4-20mA loop generally scaled through resistor for voltage -then scaled.
$155 SGD in 5 days
0.0 (0 reviews)
0.0
0.0
User Avatar
helllo sir, i will glad to work with u...it is just a simple project..so if i get i done with in 2 days.. thank you
$155 SGD in 3 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Dear Hiring Manager, I have gone through the job posting and find it's exactly matching with my technical capabilities and willing to work on it. I have worked on exactly similar applications. I will provide you complete circuit and PCB layout design. For last more than 10 years, I am working on product design in embedded and electronics area. I have exposure on circuit design, schematic & PCB design, BOM, components selection, Prototype assembly etc. I have developed many single/double/multi layer PCB board designs using Altium Designer, OrCAD, Eagle etc. I have worked on simple to complex PCB designs as per requirements. I will do design as per your requirement considering design standards IPC2221, IPC2222 and EMI/EMC design points etc. Looking forward to hear from you. Thanks with Kind Regards, Ghanshyam
$222 SGD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
A proposal has not yet been provided
$133 SGD in 2 days
0.0 (0 reviews)
0.0
0.0
User Avatar
PCB designers are key persons in research and development (R&D), electronics production units as well as in the PCB industry.I am having three year experience in R&D Organization where we design PCBs for jammers, fpgas, and many other cards.I have experience in making exploders, university projects. i have made this porject previously 2 years back that performed well, so i can do it easily within very less time.
$155 SGD in 3 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of SINGAPORE
Singapore, Singapore
5.0
15
Payment method verified
Member since Oct 14, 2010

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759) & Freelancer Online India Private Limited (CIN U93000HR2011FTC043854)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.