Produce a schematic and pcb layout (with silk screen) for a small board with a micro and zigbee module.
Design to be done in eagle and I will probably use seeed studio to make it.
pcb will be hand assembled so please use 0603
Boards is basically:
ARM cpu + zigbee module + 2 ext rs232 ports + jtag + 4 leds + 2 pushbuttons
The board will have
1. STM32F103RBT6 m3-cortex
2. Telegesis ETRX3 ZigBee Module
3. 2 x external RS232
4. 12V power in, e.g. LM1117 (farnell 1737263)
5. JTAG (farnell 8395942)
6. 2 x pcb mounted push buttons (eg Order Code: 1656423 Manufacturer Part No: SKHHAKA010)
wired to PIO pins
7. 4 x pcb mounted LEDs green & red wired to PIO with series R
8. 8 MHz xtal
SMT32 UART1 will go to rx/tx off telegesis.
STM32 UART2 and UART3 will go to 9 way d type connectors female on edge of board.
Some relevant parts from farnell,com (uk)
Part Num. Qty. ordered Product description Mnfr Part #
1447640 1 32BIT MCU, CORTEX M3, 128K FLASH; Contro STM32F103RBT6
1469051 1 LDO, 1.2VDO, 3.3V, 1%, 0.8A, 3SOT223; Pr LM1117IMP-3.3/NOPB
1494916 2 LINE DRIVER/RECEIVER, 3-5.5V, SMD; Devic MAX3232ECDG4
1611765 1 CRYSTAL, 8M, AT MODE, HC49/4HSMX; Freque XT49M-8M
8395942 1 HEADER, BOX, STRAIGHT, 20WAY; Connector 2-1634688-0
1737263 1 CHASSIS SOCKET, PSU, SMT, 2.5MM PIN DIA. MJ-180SMT
See [login to view URL] to show layout of connectors
this one I've already done several times, for personal and paid projects. the stm32 family is my favorite MCU so I already have the basic schematic for this one. pm me if interested, I can do it in just one day if you need it.
$60 USD in 2 days
4.8 (2 reviews)
2.7
2.7
23 freelancers are bidding on average $198 USD for this job
Hi,
I have an experience with STM32F103R chip - I have developed 5 devices based on this chip (each one was equipped with USB, 1+ UARTS, JTAG interface, leds and switches + ...
Please check my reputation/feedbacks and portfolio and let me know if you are interested in cooperation.
Final deliverables:
- complete design(sch+ pcb) in eagle
- production files (gerbers, BOM, pick ad place)
-other requested.
Best Regards,
Michal
Hi I can work for you, I offer editing in eagle layout, give, schematic, pcblayout, billl of materilas (Newark, Digikey, Mouser) and Gerber Files for manufacturing, 3D pictures and movie of the design.
Hi, This is Aamir
I am Electronic Engineer. I have 20 years solid experience and expert in electronic circuit design in Altium Designer, CadSoft Eagle PCB Design, OrCad, Express PCB, Circuit Maker and proteus, Design & Development of products, Material Estimation (BOM).
I also have hands on experience in Google Sketchup, Solidworks and AutoCad for Design & Development of product, Electronic components purchasing and Configuration Management Consultation (CMC).
I can handle this issue perfectly.I will provide you the best work with in the due date and time as per your required criteria.
Thanks and regards