Arduino get reading from a flow meter

An easy project to be done.....thanks for posting the job.............................................................

What kinda values I'll be getting in Arduino? What will be powering up the Arduino? I'll be looking forward to discuss.

Dear Ehsanul K., I hope this message finds you well. My name is Christopher, and I have over 4 years of experience in C Programming. I have carefully reviewed your project requirements and I am confident that I can complete this project with perfection. I understand that you are looking for someone who can read the values from a petrol pump fuel flowmeter using Arduino / Esp32. I have extensive knowledge in electronics, microcontrollers, and electrical engineering, making me well-equipped to handle this task. If you have any questions or need further clarification regarding the project, I am more than happy to assist you. Please feel free to connect with me through the chat feature, and we can discuss the details further. Thank you for considering my proposal. I look forward to the opportunity to work with you on this project. Best regards, Christopher

A competent professional with 13 years of experience in Industrial Automation. Development of Engineering and implementation of PLC Control System, HMI and SCADA Development, testing & commissioning. ◾ PLC- Siemens- S7-1500F/H, S7-400, S7-400F/H/R, S7-300, S7-1200, S7-200, S5, TI PLC, LOGO!, Rockwell (Allen Bradley)- SLC500,MicroLogix,CompactLogix. Schneider- Zelio, M171/72 ◾HMI- Siemens-OP to Comfort Panels, Kinco,Deep-sea electronics,IFM ◾SCADA - WinCC, In-Touch Wonderware, Citect , Ignition ◾ Software- PCS7, STEP7, WinCC, WinCC-Flex, TIA portal,Protool Wonderware-Intouch, Comfort Soft, Microwin, S5-DOS,Pro-Tool, Prosave,project migration and upgrade,Codesys., RSLogix, Ecostruxure HVAC, SoMachine, Automation Direct ◾VFD- Siemens, Rockwell-AB, ABB, Telemechanique, SEW and Danfoss. ◾ Industrial Networks- PPI-MPI, Profibus, AS-i, Profinet, Ethernet, Modbus,Modbus TCP,GSD,GSDML, ◾ OPC - PC Access, OPC Scout, OPCUA,Metrikon, Kepware ◾ Project Documentation- ISA88/95, GAMP, 21CFR Part11, VP, URS, FRS, DS, IQ, OQ, PQ, SOP. ◾ Programming Languages - C#, VBA,VB.net, javascript ◾ Arduino Uno, RS485, Ethernet shield,Data Logging ◾ Raspberry pi,Webcam, Raspi Camera

Hi I am an electronics engineer and have experience of arduino and ESP32 coding. I did read your project descriptions and can help you with this project. You can also check my projects as samples. Share your project details further and for any discussion feel free to contact me. Thank you

Hello, My name is Muhammad Ali and I am an experienced electronics engineer with 9 years of industrial experience. I understand you are looking for someone who can read the values from a petrol pump fuel flowmeter using Arduino/Esp32. You will need to read the amount that is being sold every time fuel is sold through the system. I believe I am the perfect fit for this project! With my expertise in electronics, including Arduino and related topics such as C Programming, I am confident that I can complete this project successfully. Please feel free to reach out if you would like more information or would like me to submit my profile for consideration?

I understand you are looking for someone who can read the values from a petrol pump fuel flowmeter using Arduino / Esp32. As an experienced Aerospace Engineer with a Masters in Flight Dynamics and Controls and years of experience in Design Modelling and Simulation, I am the perfect fit for this project. My skillset includes CFD (Ansys, Star CCM+, COMSOL), FEM (Ansys, Abaqus), Control System Design (Classical and Robust), System Dynamics, Aircraft Design and Performance, MATLAB/ Simulink and SolidWorks. This combination makes me an excellent choice for this project as I have the knowledge necessary to read the values from the fuel pump flowmeter using Arduino / Esp32. My experience includes designing controllers using Supervised Learning as well as Reinforcement Learning. Additionally, I have done many projects related to Fixed-Wing Drones, Quadcopters, Aircraft Design, Aircraft Performance and Flight Dynamics. I would be delighted to help you with your project! Please feel free to contact me if you have any questions or would like more information about my services..

Hello! I will do this for you. But you have to provide me the details regarding the petrol pump instrument for interfacing arduino to it. Kindly come over chat and plan the project for the same......

Hello, my name is Leonard and I'm an embedded systems engineer with more than 10 years of experience in robotics and application automation. I have worked on many different types of projects, including Arduino get reading from a flow meter. I understand you are looking for someone who can read the values from a petrol pump fuel flowmeter using Arduino / Esp32. You would like me to read the amount that is being sold every time fuel is sold through the system so that you can keep track of it. I believe I am the perfect fit for this project due to my extensive knowledge of microcontrollers, peripheral programming, power management system integration for mobile devices and IoT devices web programming. Additionally, my skills include Android app development for IoT system integration. I believe I am the best fit for this project because of my high quality work ethic and ability to deliver on time without any issues. Please feel free to reach out if you have any questions or would like me to provide more information about myself or any of my past projects.

Hi, My name es Carlos Nimo, I'm Telecomunicaciones engineer ando Arduino developer. I Will be happy to help You. Wey can talk about the proyect specifications. Greetings

Hello, my name is Hassan and I am a skilled freelancer specializing in a wide range of technical areas. With extensive knowledge and experience in Arduino and electrical engineering, I am confident that I can provide the best solution for your project requirements. I understand that you are looking for someone who can read the values from a petrol pump fuel flowmeter using Arduino / Esp32. You will need to read the amount that is being sold every time fuel is sold through the system. My expertise covers a broad spectrum of technical subjects including mechatronics, robotics, computer science, electrical engineering, control systems, signals and systems as well as economy. This makes me an ideal candidate for this project as I have the skills necessary to tackle this task effectively. I would be delighted to discuss further how we can work together to achieve outstanding results for this project! Please feel free to reach out to me if you have any questions or would like more information about me or my services.

We are a team of Electrical and Electronics engineers, we have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas: • Embedded C Programming. • VHDL/Verilog, LABView/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Also we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements. We can deliver your project efficiently within timeline. If you choose me, I think you won't regret. Best Regards.

Dear Client, I am a good person in the field of Embedded and IoT Development and Electronics, Robotics. I have created many PCB designs and projects. I have done many projects with Arduino and microcontrollers. So I'm very interested to do this project successfully and will complete this on time. So if you have any idea please message me Thanks

Hi, I hope this message finds you well. I am interested in your project and want to do. I have just some questions to start the work. plz reply me in chat to move forward. Thanks and regards Kundan jha Embedded developer

Hi, Yes sir I have 10 years experience with Arduino and also have in flow meter sensor. I can program this and can also provide software like code schematic and simulation with hardware if you want. I have complete lab setup. Please check my profile. Thanks

Hi there, i want you to know that i had recently done similar project with Arduino and nodemcuesp8266 and i know your requirements of projects so i will be able to easily help you in this project.

The project seems easy, but I have some questions, how do you intend to reas the flowmeter, it will send values to arduino/esp32, or we will have to implement OCR using camera to read the values? I would be delighted if you could please let me know if there is anything I can do to answer any further questions or concerns you may have about my profile.

Hi Sir, As a highly skilled and experienced, I am confident that I can provide the high-quality work you need, but i have some doubts regarding the same, lets discuss in detail make it clear & then i am ready to start the work right away.

Best Arduino and ESP32 Expert! ⭐ ⭐ ⭐ ⭐ ⭐ Dear Client, With over three decades of expertise in electronics design, circuitry, and PCB layout, I am well-equipped to tackle your project. The task at hand is clear: reading values from a petrol pump fuel flowmeter using Arduino or ESP32 to monitor fuel sales accurately. ✅I will integrate a suitable flowmeter sensor, compatible with Arduino or ESP32, ensuring precise measurement of fuel flow. Options like the YF-S201 Hall Effect Flow Sensor or similar can provide reliable readings. ✅ I will record the amount of fuel sold with each transaction. We can employ non-volatile memory or external storage options for data retention. ✅I will enable data transmission to a central server or system using Wi-Fi, Ethernet, or other suitable communication protocols for real-time monitoring. ⭐Is there any specific requirement for real-time monitoring or remote access to the fuel flow data? ⭐Are there any specific regulations or safety standards that need to be considered in the design to ensure compliance with fuel dispensing requirements? I'm excited about the opportunity to contribute to this project. With my extensive experience in electronics and circuit design, I'm confident in delivering a solution that accurately monitors fuel sales and meets your unique needs. Best Regards Hari Mohan

We need flow control meter reading sensor from sensor we can interface to arduino or esp32 and display to app or oled

Hi there, I am professional electronics engineer and embedded systems expert and have more than 5 years experience in arduino coding and interface many flow meters and recorded their results. Just check my profile and share your details. We will discuss further time and budget. Thanks

Hello. I have extensive experience in automating fuel equipment, which includes turbine flow meters and pumps. I have 20 years of programming experience in C/C++ on x86/AVR/Arduino/STM32/ESP32. I will be glad to cooperate.

To do your project. I need the following information 1 - what type of flowmeter do you use? 2 - if necessary, is there any additional equipment needed? 3 - Where will the reading data be displayed or transmitted? I have worked with many types of measuring equipment, over 10 years of experience. If you feel secure, please contact me.

Dear, I am eager to bid on your project involving the integration of an Arduino/ESP32 with a petrol pump fuel flowmeter to capture fuel sales data. Bid Details: Technical Expertise: Experienced with Arduino and ESP32. Hardware/Software: Customized solution for accurate data capture. Data Logging: Secure storage for easy retrieval. Real-time Monitoring: Remote access to sales data. Support: Post-project support and maintenance. I'm committed to delivering a top-notch solution. Let's discuss this further.

Hello, good time Hope you are doing well I'm expert in MATLAB/Simulink, Python, Java, JavaScript and C++ programming and by strong mathematical and statistical background, have good flexibility for solve your project. I have many experience practical and theoretical in implementation different algorithms (such as: state estimation and Kalman filter, design controller, analysis closed loop stability, signal and systems, signal processing, heuristic optimization, fuzzy logic, neural network and machine/deep learning fields). Evidence of this claim exist in the portfolio. I have read your project description and I can help you (without any plagiarism). Please send me the details of your project. Thanks for attention 100% Jobs Completed, 100% On Budget, 100% On Time ⭐⭐⭐⭐⭐ 5-star reviews

Hello there! My name is Abdul moeizz and I'm a dedicated electronics engineer with 3+ years of experience in designing, developing, and implementing electronic systems. I understand you're looking for someone to read the values from a petrol pump fuel flowmeter using Arduino / Esp32. You would like me to read the amount that is being sold every time fuel is sold through the system. I believe I am the perfect fit for this project! With my extensive understanding of electronics and a passion for creating innovative solutions, I'm confident that I can deliver the solution you're looking for. I'm available to discuss any further questions or requirements you may have. Please don't hesitate to reach out if you'd like more information or want to start collaborating on your next electronics project!

I am mechantronics engineer from Việt Nam with 5+ years of experience in designing PCBs. I am familiar with various CAD tools including tools preferred by Manufacturers. I am interested in doing this project with you. I have experience with Circuit Board designing and modification jobs. Handling circuits and PCB is my daily job. I would like to talk about this project in details please message in the inbox to discuss more. Expertise in: 1. KiCAD (main), Cr5000, EasyEDA, EAGLE, Altium, and other CAD tools. 2. PCB layout designing. 3. Embedded device programming: Arduino, Avr, Esp8266, Esp32, Stm8 ... 3. Circuit Designing from Scratch. 4. Multilayer PCB design. 5. Python,labview software design

Welcome sir, I am writing to express my interest in offering my services as an Arduino programmer. I have a broad range of skills and expertise in programming robots, drones, and smart homes, as well as designing circuits using Fritzing and Tinker CAD, and programming embedded systems. I am also a c/c++/python programmer With my knowledge and experience, I am confident that I can provide you with reliable and efficient programming solutions that meet your specific needs. My expertise in programming drones and unmanned aerial vehicles (UAVs) can help you develop customized solutions for surveillance, mapping, and inspection tasks. I am also experienced in programming smart home systems that can be remotely monitored and controlled to provide greater comfort and convenience. Moreover, I have extensive experience in designing and simulating circuits using Fritzing Tinker cad and Wokwi. I can help you create schematics, PCB designs, and simulations for your projects. My knowledge of embedded systems allows me to develop efficient and effective systems that meet your requirements. I am committed to delivering high-quality results that exceed your expectations. I strive to provide efficient, reliable, and timely solutions that meet your unique needs. I am confident that I can help you achieve your goals and bring your projects to life.

Hi, I have read and understood your job description you need to arduino uno code for flowmeter sensor I have expertise in Electronic, Embedded and Robotics. I can do develop code for an Arduino Uno using a flowmeter sensor . The purpose of the flowmeter sensor is to measure the amount of fuel. for you as per your requirement. Please initiate a small chat so that we can discuss the details of the project. Feel free to drop a message for further discussion. Thanks,,

Thanks for posting this project. I have good experiance developing firmware code for arduino and other microcontrollers. I already have good hands on experiance working on all mentioned technology and sensors. Feel free to contact me for further discussion. Thanks, Have a nice day.

Hi, I hope this message finds you well. I've come across your posting, and I'm genuinely excited about the opportunity to assist you with reading values from a petrol pump fuel flowmeter using Arduino or ESP32. Understanding the Requirement: You need a reliable and accurate way to capture the amount of fuel sold each time a transaction occurs. This data is not just critical for sales but can also serve as a vital metric for inventory management, trend analysis, and optimizing operational efficiencies. My Expertise: I've worked on various Arduino and ESP32 based projects over the past few years. One such example I'm particularly proud of is the integration of a water flowmeter into a smart irrigation system. By reading values in real-time, the system adapted irrigation patterns based on actual water consumption, ensuring efficiency and sustainability. The Solution: By employing a similar approach, I'll first interface the fuel flowmeter with the Arduino/ESP32. Then, I will write a program that listens for changes, reads values when fuel is sold, and logs this data in an easily accessible format. Given my experience, I'm confident in delivering a robust and efficient solution tailored to your specific needs. I appreciate your consideration and look forward to the possibility of contributing to your venture. Should you need more details or have any queries, please don't hesitate to get in touch. Warm regards,

Dear Sir, I would like to present myself as prospective candidate to do your project. I have sound knowledge and experience in electronic and Programming including Arduino programming and ESP32 programming. I have read your project description. Few years ago I did try to read fuel pump flow reading in order to make billing system. And I did succeed too. I did do pretty much research on pump machines. If you grant me the project I will program you an Arduino or ESP32 for you. Message me if you have any question. Expecting favorable reply, I remain. Isuru Athukorala

I believe I would be the best fit for this project because of my extensive knowledge of Arduino/Esp32 and the petrol pump fuel flowmeter reading using Arduino. With my expertise in electronics, microcontroller, C programming and electrical engineering, I can complete this project quickly and accurately. I understand that you are looking for someone who can read the values from a petrol pump fuel flowmeter using Arduino/Esp32 and I am confident that I am the perfect fit for this project. Please let me know if you have any questions or would like to discuss further how I can help you reach your goals for this project?

Hi, I am an Electrical Engineer and IOT expert. I have done many projects using raspberry pi, Arduino, ESP32 and ESP8266. I am interested in this project. Please leave a message for more discussions Thanks

Dear Sir, I have experience with the ESP32, where I've successfully read data from flow sensor to measure the coolent flowing through the main line. Best Regards, Rohit

Hello there, I see that you're looking for ARDUINO or ESP32 expert to read the flow meter of fuel dispensing machine. Well, I've worked on a similar project to to calculate the volume of fuel dispensed and remaining in a tanker. I can share you my GitHub repo of that project. I'm a Embedded Systems Developer with 3 years of hands-on experience in programming different microcontrollers like Arduino boards, ESP32, STM32, RPi and so on. For further information, come to the Chat or let's have a zoom meeting so We can discuss the project and budget. Looking forward to hearing from you soon. Thanks and regards, Muazam

Well i can tell you good flow meters available in market which are very accurate.i can even log the data for u in sd card and send the file to u over gmail.

I have experience in data acquisition of measuring instrument (sensor) using Arduino, such as temperature and humidity sensor, air flow meter, and light intensity.