RE: Custom gauge set for a 2008 Suzuki DR650 motorcycle
I am writing from the USA and wondering if you would be able to produce and build a custom LED such as one found on this web site: [login to view URL]
I would like to produce this for a motorcycle as a custom application. Additionally, I would be interested with a couple added features:
-The dial in MPH -NOT- KPH, and indication up to 120 mph. I am not thinking this 650cc will go much faster that that. Most likely it would max at about 100mph after modification.
-The dial would also feature: an added neutral LED light (red), a high-beam LED light (blue), and turn signal LED light (green). The dial would be amber back-lit for night driving.
-The dial should feature a digital LCD odometer (tripometer is not totally needed, but if it can be done, then sure); amber back-lit in the LCD
-Clock is possible (this is an option)
I would like to install LEDs on the tachometer side with (5) blue LEDs for a fuel gauge. (1) Red LED for low fuel, and if possible blinking the red LED for low-fuel. The layout would be similar to this:
[login to view URL]
However, please note this SkyTeam St125 has these LEDs for the gears (1-2-3-4-5), but I will want the LEDs for the fuel level.
Here is an example of a tach (not the same build as the above link, but similar): [login to view URL]
I would also like a tachometer presented in a similar way. With the LEDs as follows: (4) Green LEDs [for 0,1,000, 2,000, 3,000 RPM], (3) Yellow LEDs [4,000, 5,000, 6,000 RPM], (6) Red LEDs [7,000, 8,000, 9,000, 10,000, 11,000, 12,000]
The size would be about 2" or about 60mm face. If need be 3" or 76mm could be made to fit all the components. Additionally, have a glass face, or not scratch face.
This gauge below is a 60mm style, and I would want to try to fit this design in to this sized case.
[login to view URL]~0paMkBw&_sacat=0&_nkw=universal+speedometer+gauge&_from=R40&rt=nc&_trksid=p2380057.m570.l1312.R1.TR10.TRC1.A0.H0.Xuniversal+[login to view URL]
However, it is not totally necessary to have text be the same.
My goal here is to make this a set to install on a Suzuki DR650 tracker I am building, and then find a manufacturer to produce these gauges for the US and UK market.
Keep in mind this would be two separate 60mm cases.
Is this something that you’re able to produce or make?
Is this something you could design?
What would something like this cost if you made this for me?
Are you able to provide a proto-type?
Would you be willing to make more sets? Maybe about 12 to start with.
I have additional web-based links and resources to program the ardino chip for example.
Thanks for your consideration.
I look for ward to hearing from you.
15 freelancers are bidding on average $1656 for this job
Dear Sir, I am an electrical engineer with 19 years experience in this area . Relevant Skills and Experience I am interested in your project : Please send a private chat message. Proposed Milestones $7222 USD - 1