Oil Recycling Plant MEP Consultant

@androaiad

Hello, I am a design engineer, I am expert in 3D different products designs & Modeling so i can do the required design in the required time. I have finished similar projects before and finished 600+ projects. Please check my portfolio and reviews. Thanks.

@smstudio125

With all due respect, while your project—which involves the construction of a large oil-recycling plant—is quite distinct from my expertise in Architecture and Interior Design services, it does not fall within my skill set nor professional experience. Therefore I wouldn’t be the right fit for the role of MEP Consultant. It is important for you to find the most suitable MEP consultant who has direct experience and knowledge in working with petro-industrial facilities as well as navigating local regulations. Especially considering the level of intricacy involved in your project, such as industrial process piping, HVAC systems for hazardous areas and fire-suppression approaches, you need someone who understands the technical complexity and specializes in this niche. While I realize that this response may not have been what you were looking for, rest assured that I value honesty and transparency. I wish you the best of luck in finding the perfect candidate for your project and if you ever require architectural or interior design support in the future, do let me know!

@ahmedzegho

Hi, I can support your project with full MEP design leadership from concept through IFC, with strong focus on industrial mechanical systems including process piping, hazardous-area HVAC, and Civil Defense–compliant fire protection. I will translate your process data into coordinated Revit/AutoCAD deliverables, including load calculations, pipe sizing, hydraulic analysis, equipment selection, and fully integrated electrical, plumbing, and BMS systems. The package will include IFC-ready drawings, BOQs, datasheets, schematics, and a clear compliance report aligned with UAE codes and NFPA. I’m experienced in multidisciplinary coordination and can support design reviews and stakeholder workshops to streamline approvals. I’m ready to review your initial data and define a phased timeline to move efficiently toward tender.

@beingmrme

HI, I can deliver complete MEP consultancy for your oil recycling plant including process-integrated layouts, electrical systems, piping design, HVAC, safety compliance, and coordinated drawings for efficient, code-compliant industrial execution. 1️⃣ What is the plant capacity (TPD) and process type (batch/continuous)? 2️⃣ Do you need full MEP design or also process engineering integration and layout planning? 3️⃣ Which standards/codes should be followed—IS, NFPA, IEC, or project-specific requirements? Warm regards, The Blend Nation.

@Beaversbrick

Having been an architect and structural engineer for several years, I have developed a deep understanding of the intricacies involved in coordinating complex projects, like your oil recycling plant. My experience with large-scale structures, coupled with my proficiency in using BIM tools like Revit and ArchiCAD, uniquely positions me to deliver exceptional MEP designs for your facility. I am well acquainted with the challenges associated with petro-industrial facilities. My portfolio includes similar projects where I successfully integrated robust mechanical, electrical, and plumbing systems to meet stringent codes and standards. I can leverage this experience to ensure your plant not only complies with local regulations but also aligns with the municipality's sustainability goals. Moreover, I am not just a technician at the desk; I thrive on collaborative work. As a workshop leader accustomed to engaging stakeholders effectively, I can harness the insights of your municipality's team to create an MEP package that reflects their aspirations for this project. Plus, my commitment to delivering within agreed timelines aligns perfectly with your project's demands. Consider this a warm invitation to embark on this remarkable journey together.

@sajjadkhanemon

Hello there, This is Sajjad Khan. I am an Architect with more than 6 years of experience in my field in Design and Visualization, MEP, Structural etc. I am experienced in Revit, Rhino, Twinmotion, 3ds Max, AutoCAD, SketchUp, Lumion, D5 Render and Blender as well. I have recent experience in similar projects also. It’s an interesting project and I am really excited to start working on it. Please Get in Touch with me for further discussion on the project.. Thanks Sajjad Khan

@hayat38402

Hi, how are you doing? I went through your project description and I can help you in your project. your project requirements perfectly match my expertise. We are a team of Expert Mechanical design Engineers, we have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas:  Product Design | 3D CAD Modelling  Finite Element Analysis | Computational Fluid Dynamics  Thermal analysis | Structural analysis  HVAC and Heat load calculation We are proficient in using following software’s:  AUTOCAD  SOLIDWORKS  ABAQUS  ANSYS APDL | ANSYS Fluent  MATLAB | SIMULINK  COMSOL Multiphysics  FUSION360 | CATIA We have good command over REPORT WRITING, we can show you many samples of our previous reports. We can discuss further details in the message box.

@CreativeDesign50

Hello, I can lead the full MEP design for your municipal oil-recycling plant, delivering a coordinated, code-compliant package from concept through issued-for-construction. I understand you need a mechanically driven design covering industrial process piping, hazardous-area HVAC, and Civil Defense–compliant fire suppression, fully integrated with electrical, plumbing, and necessary structural coordination while aligning with UAE regulations and sustainability targets. I will deliver coordinated BIM-ready drawings (Revit/AutoCAD + IFC), detailed design calculations, single-line and control schematics, equipment schedules, BOQs, and a clear code-compliance report referencing UAE and NFPA standards, ensuring a clash-free and approval-ready submission. I am a Top Verified Freelancer and ensure fast, high-quality results for time-sensitive tasks. We can discuss the project further over chat. Portfolio: [https://www.freelancer.in/u/CreativeDesign50](https://www.freelancer.in/u/CreativeDesign50) Thank you for your time and consideration. Best regards, Kirandeep Kaur

@muhannadbukhamse

Hello, ✅ How will piping routing and supports align with structural loads and equipment layout? I will deliver coordinated MEP design covering process piping, HVAC, fire protection, and electrical/BMS with full calculations and BIM IFC drawings. Experienced in petro-industrial projects, I ensure code compliance, clash-free models, and optimized systems. Let’s discuss your data and next steps. Best regards, Mohand

@eslamsaeid1991

Hello sir, As a Senior MEP Design & Infrastructure Consultant with extensive experience in Industrial Process Facilities and high-complexity UAE Municipality Standards, I specialize in integrated engineering for hazardous environments. I will lead the MEP design for your oil-recycling plant, ensuring that every industrial piping run and HVAC system is technically coordinated for absolute safety and Civil Defense approval. Engineering Goal & Impressive Solution Summarized as the delivery of Petro-Industrial Infrastructure Resilience. My solution solves the "Hazardous Area Integration" problem by utilizing a Zonal Mechanical Coordination Strategy, specifically designing explosion-proof HVAC systems and chemical-resistant process piping that meet both NFPA 11/16 foam-water standards and local sustainability targets. I implement a Unified BIM Workflow in Revit to detect and resolve clashes between high-density pipe racks, electrical containment, and structural platforms before they reach the site. Electrical & Control: Design of ATEX-rated power distribution, lighting, and BMS integration for real-time facility monitoring. Compliance & Sustainability: Aligning all equipment schedules and compliance narratives with Estidama or Al Sa'fat requirements as per the specific municipality. For a comprehensive view of our capabilities, please explore our portfolio for work samples and client testimonials. Regards, Eslam

@lamvanduong

How are you? I checked your description carefully. I'll provide all drawing sets and wonderful result such as PDF, DWG(2D drawings), rendering images and BIM(3D model). I have many experience in Architectural BIM modeling, MEP design, structural design, civil engineering and drawing by using revit, Archicad, Chief architect, sketchup and cad , etc. I'll use your country building code to permit. Let's discuss more project and start together. Best regards

@Ahmedrabie15437

Hello, I am familiar with this task. I can start the work immediately once u awarding me. kindly chat with me we can discuss details and better understanding of your vision. I will provide u 100% correct work. thanks

@Zebinisob

Hi, good day! I would like to apply for this project. I can support the full MEP design of your oil-recycling plant, delivering coordinated mechanical, electrical, and plumbing systems with strong focus on process piping, HVAC for hazardous areas, and fire protection compliant with UAE Civil Defense and NFPA standards. I have experience in industrial facility design, BIM coordination, and producing IFC-ready drawings, calculations, BOQs, and equipment schedules. I can also collaborate in review workshops to ensure smooth approvals and alignment with municipality requirements. I look forward to discussing the project and timeline. Thank you.

@ahmedaaalnaasan

As an accomplished engineer and MEP specialist with a focus on CAD/CAM, Civil and Electrical Engineering, I believe I possess all the necessary skills to tackle the challenges of your oil-recycling project in the UAE. My eight years of experience in technology services have taught me to adapt and embrace innovative approaches that suits a client's specification, ensuring utmost satisfaction. Having been part of various large-scale industrial projects like yours, I understand the importance of capability, creativity and meeting strict deadlines. My expertise stems from not just my qualifications but from my ability to integrate mechanical, electrical, plumbing solutions smoothly. In fact, I am highly conversant with creating coordinated MEP drawings especially in RVT or AutoCad formats at IFC level. To meet your project standard I will achieve design calculations for HVAC loads considering parameters for hazardous areas as well as form hydraulic fire-suppression measures that satisfy local Civil Defense requirements. Understanding your need to align with civil codes and standards is critical; my previous experience in similar petro-industrial facilities including those within UAE will undeniably complement this aspect. Moreover, in line with meeting delivery expectations;