Find Jobs
Hire Freelancers

Inspection solar light sample in Shenzhen

$30-180 USD

Completed
Posted over 2 years ago

$30-180 USD

Paid on delivery
We are looking for a inspector to visit a factory of solar light in Shenzhen. A single sample need to be examine. Location : Hueide South Road, Fuyong Street, Bao'an District, Shenzhen, China. Product : One unit including solar panel, lithium battery, controller, LED board. No packaging. Requirement : experience in general electrical area, lighting or battery would be a plus. Know how to use a multimeter. Material : you will receive a protection equipment. Multimeter, photometer will be provided on place. This sample will follow up with two container of the same product and you could be hired for that mission if everything goes well. Please send your application and your final price. Transportation fee, Freelancer fee or any other fees are at your charge. Thank you for your interest.
Project ID: 31805044

About the project

17 proposals
Active 2 yrs ago
Location: Shenzhen, China

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
Awarded to:
User Avatar
Hello Sir/Madam, Located in Shenzhen, I know well of electronic parts include PCBA, battery and other components. So I think can help in this project. I need about one hour drive to your factory and take 3-4 hours inspect your samples, tesing it , take photos and extra 2 hours complile inspection report to you . Please kindly send me your test standard and other guidance. If necessary, I can take my mutimeter and other tools. The total cost is $150, include all transportation and my freelancer fee. If you have any furthur question, pls feel free let me know. Thank you! Kevin
$150 USD in 2 days
0.0 (0 reviews)
0.0
0.0
17 freelancers are bidding on average $148 USD for this job
User Avatar
Best Solar Design Expert at your doorstep! Dear Client, We can inspect "Solar Light Sample" for you. Please share me existing Product sample we can start this project. We have extensive experience in Solar Light based Product design, PCB design and know all the intricacies required to get the job done with perfection. We couldn’t stop ourselves from bidding after going through the description as they are an exact match with our skill set and experience. Please message me as there are certain queries and suggestions for robust and reliable product development. With more than 15 Years of experience in PCB Design and Circuit Design in Altium, We can ensure you best quality work and before time delivery. Following is a brief list of expertise that we are carrying: 1. IOT products 2. Microcontrollers – STM32, STM8S etc. 3. Smart Products like Smart watch - GSM/GPRS/GPS etc. 4. Wireless Products - BLE/WiFi- ESP32/ESP8266 5. Low Power Battery Products design 6. Multimeter, Solar Light, Panel 7. Lithium Battery, LED Please answer the following questions: 1 What are your future plans with this project? 2. Are there any specific market standards like CISPER you are aiming? 3. What will be ambient temperature of this product? Let’s have a quick discussion for 5 mins where we would formulate a plan of action of how we shall take this project to the horizons of success. Regards Avi Tech Experts Quality is never an Accident
$180 USD in 2 days
5.0 (39 reviews)
7.3
7.3
User Avatar
Hello I'm Mohamed Saeed electrical engineer with high experience I have checked your job description and ready to help you in your project.
$140 USD in 7 days
4.7 (49 reviews)
6.6
6.6
User Avatar
Hi I can Inspect Solar Light Sample and share the improvements and suggestions for you. Please share me existing Product Solar Light Sample so I can provide feedback from my side. I have humungous experience in Solar Light based Product design, Lithium Battery system, LED Board and would make the solution cost effective, robust, and efficient. If you are looking for reliable design partner please message me now. I provide services of PCB Design, Circuit Design, Circuit Review, PCB review, Circuit simulation, IOT products development and Sensor conditioning product development. The expertise of mine is in the following fields: 1. Wireless Products – BLE, Wi-Fi, NFC, Lora etc 2. Power Electronics- Buck, Boost, Flyback, Half Bridge etc 3. IOT sensors interfacing 4. Microcontrollers- ESP32, STM32, STM8S, RL78 etc. 5. GSM, GPS, GPRS, NBIOT 6. Solar Panel, LED Board After reading your project details, I have certain queries and suggestions: 1. What is the application of this product? 2. What will be ambient temperature of this product? 3. What are the mechanical constraints to be taken care of? Please try to answer these questions based on which I would be providing free of cost consultation. The Price mentioned is for indication purpose and exact would be calculated after requirements finalization. Waiting for your message, Regards Hari Mohan Engineering for one is a magic for others
$140 USD in 2 days
5.0 (4 reviews)
5.2
5.2
User Avatar
Hello i am from Shenzhen China. i am in shajing its next town of fuyong. i also design led produt. i think i can help you to inspect those lamp Please take my interview for this job best Regards Rezwana Tabassum Shenzhen,China
$200 USD in 3 days
3.5 (6 reviews)
3.8
3.8
User Avatar
Hi, This is Pearl from Shenzhen China, I’m native Chinese with fluent English speaking skills and solid product sourcing experience. I used to visit and did inspection in factories a lot of times. I can do inspection according to your specific requirements. Let me know if we can work together on your project. Looking forward to hearing from you soon. Thank you! Best regards, Pearl
$140 USD in 7 days
4.5 (3 reviews)
2.5
2.5
User Avatar
Hello, I have 10+ years of Embedded product design with multiple domains like a consumer, industrial, automotive, IOT and wearable product. -Hardware architecture design using MCU, controller, and FPGA, as well as low power battery, operated device -Experience in all phases of product development from prototyping to mass production -Experience in Schematic and high-speed PCB layout board design with multilayer PCB design, Blind & Buried Vias in HDI Design. -Expertise in hardware testing and troubleshooting/root cause -Working experience on power management system design with Buck-boost, Battery charger, and fuel gauge, USB3.0 Ctype and PD charging, POE and etc -Expertise in design and simulation of analog circuits -Experience in Microprocessor and microcontrollers like NXP, ST, Microchip, Marwell, Qualcomm, MediaTek, TI, Renesas, and Atmel -Exposure in mechanical design review -Expertise in wireless SOC with Bluetooth, WIFI, 4G, Lora, Zigbee from NXP, Nordic, Ublox, Qualcomm, Cypress, Broadcomm, TI, ESP, Silabs, Microchip -Experience in wire interface USB2/3, SPI, I2C, UART, HDMI, Ethernet, SDIO, MIPI-CSI/DSI, CAN, Modbus, RS232, RS485 -Expertise in solving problems of EMI/EMC -EMI / EMC compliance testing and product certification like CE/FCC/UL and etc Also, We have a team for software development, firmware development as well as CAD design. we will define milestone and adjust amount after discussion Let me know if you need help from me. Thanks. --Alpesh
$140 USD in 7 days
5.0 (1 review)
1.6
1.6
User Avatar
Dear Sirs, I can be helpful for you on this project. My current location is Pakistan right now. If you are willing to provide relocation package I am ready to offer my services. You may have a keen look at my Profile. For more details please get in touch. I look forward to hear you back soon. Best Regards,
$140 USD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello, This is Janver Zhong located in Shenzhen China, majored in business English and worked for international business more than 10 years (since 2009), with experience in the LED lighting products.    My Skills : 1. English level of CET6, excellent skills in listening, speaking, reading and writing; 2. Good computer skills and familiar with Microsoft Office 3. Rich experience of e-commence business like Alibaba, Amazon 4. Experience of international exhibition in the USA, Poland, Brazil, Peru    I Can Do for You : 1. Source right products or manufacturers from China, price and trade terms negotiation; 2. Airport pick-up, hotel reservation, flight & train ticket booking; 3. Accompany visiting local factory, provide translation service and tour guide in China; 4. Sample collecting, order follow up like quality control, shipment arrangement;   Hope we can be good friends as well as work partners !
$100 USD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi, I can arrange engineer to inspect your solar panel in Bao'An. The engineer is in FuTian, He will go to your place and inspect the solar panel. I am looking forward to receive your message and instruction. Please tell me the inspection date & preferred time: Looking forward to receive your message!
$150 USD in 1 day
0.0 (0 reviews)
0.0
0.0
User Avatar
Dear big boss, I have rich inspection experience in solar led products before, I know how to test, for safety and function, I know how to use the relative equipment,please give me the chance to do this work. Thanks and best regards, Core yin My wechat:13826252061 Skypee:Coreyin-360gz
$89 USD in 3 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello! I am electrical engineer, working in design and manufacturing of photovoltaic inverters and battery management systems, complex on grid snd off grid PV systems. Of course I know how to use multimeter, photometer and all electronics tools. Including transportation to Fuyong district and back expenses are 250usd per one day. I can offer same price for pre-shipment inspection with random check, 250 usd per day including transportation. Best regards, Dmitry Panasyuk
$250 USD in 1 day
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello, I am interested in this project. I have been working as lighting inspector for the third largest lighting company in Isreal for many years. And I am located near Shenzhen so I can drive their easily. Please feel free to contact me if you have any questions. Thanks, Eamon
$150 USD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello, I'm living in Shenzhen now with more than 10 years quality control experiences, I know the whole procedure of production including IQC,IPQC, OQC and FQC, and I can help to find a problem and improve.
$130 USD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi there, This is Zarek from Shenzhen, China. I’m currently working with a inspection service providing company called VerifyCargo-Mexico as an experienced inspector, I’m also speaking native Chinese and have my own ride to any address in a efficient way, so I will be able to complete this inspection work on a perfect condition. Please be free to drop me a message. Regards, Zarek
$100 USD in 1 day
0.0 (0 reviews)
0.0
0.0

About the client

Flag of CHINA
Shanghai, China
4.8
1
Payment method verified
Member since Apr 26, 2021

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759) & Freelancer Online India Private Limited (CIN U93000HR2011FTC043854)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.