Arduino Electronic module
$250-750 AUD
Paid on delivery
Project Description:
The project aims to assemble an Electronic module to detect equipment fall and activate the solenoid valve once the recorded data go out of set Orientation parameter.
The equipment will be mounted on the base, the module will be powered on by the Push to Start switch. Arduino 3 axis Accelerometer module will be used to detect acceleration, orientation, and impact. These data will feed to Development Board for real-time analysis. The individual feed ( Acceleration, impact, and orientation) compared with the set value, if the value is out of range, then the board will give a 5 V or 12V output to Solenoid valve to open/close.
Some additional features.
1. Battery low Voltage light indicator.
2. Solenoid valve opened on impact and closed on impact.
Note: Arduino 3 axis Accelerometer module codes are available online in C++.
Scope of Work
1. list all the parts from the website [login to view URL] for this project.
2. Recommend power input and the list all parts.
3. Guide us to assemble all the parts.
4. Write a C++ code to record data from the 3 Axis Accelerometer in a real time.
5. Recommend a development board form the website [login to view URL]
6. Guide us to load the upload the Code.
8. Help us to read data/record the data or see that data in real time.
9. We will get back to you in 5 days regarding the set parameter to trigger the solenoid valve to open/close.
10. Supply the codes to trigger the solenoid with the user given values or guide us to correct the program.
11. We will test the codes and Test its functionality it within 2 days.
12. Necessary correction if required.
Parts:
1. Board will be low power consumption.
2. Longer Battery life.
3. The module will be as small as possible.
Project ID: #17022589
About the project
22 freelancers are bidding on average $583 for this job
Hi I am experienced arduino developer with more than 8 years of experience. I can do it for you. I have completed a number of projects using accelerometer. Please review my profile if you are interested in working w More
Hi, I hope you are doing well. I have expertise in embedded system design and development. I have worked on projects with IMU, Solenoid and Low Power Applications. I have reviewed your project details and I also More
Worked on Arduino to build prototype digital device and IoT devices to control lots of machines and devices. I will try to move this project successful and longterm support. 15+ years of experience on Computer Langu More
Hello there! Hope you doing good! If you still need this to be done, be sure to contact me. Lets make something awesome! Greetings!
Dear Sir, I have experience in working with the project based on the Arduino, STM controller, NRF, ATMEL. I have also worked on the IMU sensor for the robotic application ( acceleration, gyro) Let u More
Hi, I am a professional electrical engineer. I am an expert in designing and simulating systems on and writing arduino codes I also have the hardware to test and confirm working code. You can see some of my work in my More
Hello This is Mamdouh and I am happy to send you. Give me this job, I am able to start from the scratch
from what I understand it's an easy project for me. I've used many IMUs in previous projects to get the acceleration and measure the orientation of robots. It should be a simple project and I'm willing to deliver you More
I am very comfortable working with the Arduino platform and besides I have great knowledge about firmware. If you accept me to work on this project, I can do the project and send you the entire project within seven day More