Find Jobs
Hire Freelancers

Image sensor board design

$750-1500 AUD

Closed
Posted over 4 years ago

$750-1500 AUD

Paid on delivery
We need a mipi camera board for Raspberry Pi. It may require special skills in PCB artwork, circuit design, linux device driver for SONY image sensor. Your work will be 1. Design of the circuit with a sony starvis cmos sensor(e.g IMX291 with MIPI CSI-2 or similar) 2. Design of the PCB with an M12 lens mount holes (board size: 20mm x 20mm) - Freelancer will share PCB design files, BOM, gerber 3. Sample production of 5 boards - Lens is not included. You can use any lens for your own test. - PCB should be assembled (CMOS, power ICs, FPC connector and etc) 4. Verification on Rapsberry Pi - Sample code (c or c++) to get a RAW(10/12 bits) and compressed image should be provided - The sample code should provide an interface to control the CMOS sensor(exposure time, gain etc) - The device driver should be supplied. - The device driver and the sample code should be able to work with the maximum exposure of the CMOS sensor ( 1 sec for IMX291) - The OS should be either Rasbian or Ubuntu 16.04/18.04 Task acceptance format: 1. The device meets the requirements and characteristics 2. PCB files, device driver files(c code), demo files(c/c++ code) 3. Working prototype(both board and code) 4. Your final result should be able to capture 1000 consecutive image frames(raw and compressed) from the sensor without any issues. We prefer a freelancer who has experience of a similar project with sony sensors. If tests fail, debugging, redesign, reassembly, retest will be free of charge for us (for the payer party) We are flexible on the date of start and duration.
Project ID: 22805145

About the project

17 proposals
Remote project
Active 4 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
17 freelancers are bidding on average $1,580 AUD for this job
User Avatar
Hello, I'm an electronic product designer with 8 years of experience in wearable device and IoT product design. I have rich experience in camera device design, video streaming etc. I read project description carefully and understood what you are expecting here. This project is no challenging for me. I can submit the results with quality on time. Looking forward to having opportunity to discuss on the project in detail via chat. Thanks Alexander
$1,125 AUD in 7 days
4.9 (26 reviews)
7.2
7.2
User Avatar
Dear Client, I can do it for you as I have more than 5 years of experience in doing all types of circuit design and PCB Design. Following is the expertise that I am carrying: 1. RF PCB Layout 2. High Speed Design Layout 3. Low Speed Design Layout 4. GSM/GPRS/GPS 5. BLE/WiFi- ESP32/ESP8266/NRF24L01 6. Raspberry Pi Please provide me the details of your project and enjoy my work within minimum time. You can also see what other employers like Sanjeev has to say about me in terms of my knowledge in Circuit Design and Before Time delivery. Always striving to make your experience great. Regards Avi
$1,000 AUD in 2 days
5.0 (12 reviews)
5.5
5.5
User Avatar
Hello, I am Engineer and interested in your project. I have some questions regarding your project. Please tell me about your time limits? When you want your project to be completed? See my profile and reviews for further details. Regards Engineer Nouman
$2,000 AUD in 30 days
4.7 (23 reviews)
5.5
5.5
User Avatar
Hi! I've been working with image sensors from OmniVision designing a custom board with CSI interface. Particularly I don't have experience with IMX291 but the basic principle of operation is similar and with available datasheet and technical documentation it's not hard to make it work. I can make the required prototypes (5 pcs) and test them on Raspberry.
$1,500 AUD in 60 days
4.9 (16 reviews)
5.0
5.0
User Avatar
Hi, I have been developing embedded projects using C/C++, for more than ten years. We can discuss details over chat. Best regards
$1,125 AUD in 7 days
5.0 (9 reviews)
4.7
4.7
User Avatar
I have more than 7 years experience in embedded systems and PCB design. and I have already worked on imx and rpi .so I can do your job within a time limit with your satisfaction.
$2,500 AUD in 30 days
4.8 (6 reviews)
4.6
4.6
User Avatar
I have all the versions of RPi, and have good experience on them. Developed many camera based projects on BB and RPi.. some where designing their boards and writing drivers.
$5,000 AUD in 170 days
4.6 (2 reviews)
4.8
4.8
User Avatar
I am an Electrical, Electronics and Embedded Engineer. I read through the job description very carefully and I am absolutely sure that I can do the project very well. I have worked on similar projects to what you are looking for, and I am confident I can exceed your expectations. I can achieve the results that you are asking for.I can complete your project on time and within your budget. Thanks
$750 AUD in 7 days
5.0 (10 reviews)
3.9
3.9
User Avatar
Hi, please see the milestones i outlined, Best regards. .
$3,500 AUD in 7 days
5.0 (1 review)
3.1
3.1
User Avatar
Hello! Nice to meet you! I have read your project carefully. I am very interested in your project. I am a Microelectronics and Automation engineering expert. I have a lot of experience in IoT technology. And I have a lot of experience in the MCUs and MPUs such as the ARM, FPGA, DSP, Arduino, Raspberry, PIC, ATMega and so on. And I can do the coding using Python, C/C++, Qt, C#, Java, PHP and so on. I can do help you. I hope to cooperate with you. Feel free to contact me. My regards.
$1,000 AUD in 10 days
5.0 (1 review)
2.5
2.5
User Avatar
Hello... I am new here but I am working in the writing industry since 2010. I know all writing techniques, try me once I will deliver supreme quality paper.
$750 AUD in 1 day
0.0 (0 reviews)
0.0
0.0
User Avatar
https://www.freelancer.com/projects/android/android-raspberry https://www.freelancer.com/projects/c-programming/Automa-ESP https://www.freelancer.com/projects/python/Raspberry-Gender-Age-Recognition-two/ done similar tasks lets chat
$1,125 AUD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello! Let me fix your requirements in short: 1. Image sensor: StarVis IMX291 2. Module size: 20x20mm 3. M12 lens holder (18mm between holes) 4. Connector: RPi compatible 5. Fully functional Linux kernel driver (RPI Ubuntu 18.04) for 1 image size configuration (full sensor area without binning) 6. Demo application I will happy to design camera module, manufacture samples and develop software for your project. Payment term: only after you test module samples and driver in your lab. Some words about me: I specialize in camera and imaging systems design and manufacturing. I have expertise and real experience in camera PCB design, firmware development, SoC linux camera driver's, ISP tuning, etc. If you have any questions, please feel free to ask me via chat.
$750 AUD in 7 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of AUSTRALIA
Pullenvale, Australia
0.0
0
Payment method verified
Member since Dec 11, 2019

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759) & Freelancer Online India Private Limited (CIN U93000HR2011FTC043854)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.