Find Jobs
Hire Freelancers

Machine to pick and place small size objects:

$750-1500 CAD

Closed
Posted over 5 years ago

$750-1500 CAD

Paid on delivery
Description: There will be hundreds of different objects. Different objects have different size and shape. The range is from 2 mm to 15 mm in diameter. Material of object: Similar to candies, also can be in hard or soft gelatin. Container: each container has hundred pieces of same objects inside. Tray: Each tray the size is 7 inches horizontal, 5 inches vertical, and 1 inch deep. It sits on the table. Each tray has 28 compartments: 7 horizontal and 4 vertical total 28 compartments. All the containers and tray are within 1 ft, How are we doing now: 1. The staff pick up a container of the object. Inside the container all the objects are the same. 2. The staff picks up the objects and put it in the compartments of the tray. The objects can be placed in any of the compartments, based on the instruction. 3. The staff will continues this process and pick up a different bottle that contains different objects and put it in the compartments of the same tray. What we try to do using the machine: The staff bring the container out near the tray. Based on the software instruction, the machine will pick up the objects from this container and place it in the compartments of the tray as above For your Consideration: 1. To use a suction cup to suck up the object and place it in the compartments. 2. Use a robotic to pick and place. 3. Has the object placed in a small conveyor belt with mechanical device to push the object down to the compartment below. 4. Any practical method that you may think of within the budget.
Project ID: 17606122

About the project

26 proposals
Remote project
Active 5 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
26 freelancers are bidding on average $1,301 CAD for this job
User Avatar
Dear Sir. I am 3d modeler. I have experience to design many products using Solidworks and Autocad. I can help you.
$750 CAD in 5 days
4.8 (112 reviews)
6.9
6.9
User Avatar
i can make a robotic arm to pick the the things, how much speed you need ? i have to think in that way and want to discuss more on this, to brief about me: I am mechanical design engineer by profession and graduate in mechanical engineering with PG in CAD/CAM, ANSYS & Solidworks. I can perform almost all kind of simulation like CFD, FEA, structural analysis etc. I have expertise in many design tools like solidworks, CATIA, ANSYS, 3DMax, Creo MATLAB etc. As i have engineering background with Nine years of industrial experience and very confident about any project related to mechanical engineering field. I have preferred freelancer badge, you can see next to my profile name.
$1,250 CAD in 20 days
4.9 (73 reviews)
6.9
6.9
User Avatar
Hello '' I'm Mohamed Saeed . Mechancial engineer with high experience .I have checd your job description and ready to help u
$1,250 CAD in 20 days
4.8 (48 reviews)
5.9
5.9
User Avatar
Hello, Greetings for the day, I can design you the machine to pick and place, all the requirements mentioned for the robot, I can do, please come in chat if you have any more details to discuss, I can do this task, please award me. And I will be waiting for your message. I have 7 years of experience in CAD/CAM/CAE. Please visit my profile to see my past work and reviews. I have expertise in Solidworks, Catia, ANSYS, Creo, Abaqus and MATLAB. Looking forward to hear from you soon. Feel free to contact me. Thanks & Regards, Irfan Shekh
$1,250 CAD in 20 days
4.6 (37 reviews)
5.9
5.9
User Avatar
Professional engineer with 39 years of design and development expertise..........................................
$1,500 CAD in 20 days
4.4 (98 reviews)
6.3
6.3
User Avatar
Greatings from NYC, This is Abdul, a mechanical engineer with long experience in machine design and development. I've good experience with Pick and Place, conveying, image processing and multiple applications grippers. According to your description, And I can provide you with full design study for your problem. Includes : *Bill of materials, including All components in the integration system. *Layouts drawings. *3D graphic Assembly for the components and the process. Please let me know if you have a any concerns or questions. I'll will be happy to help you. Best regards,
$1,000 CAD in 10 days
5.0 (1 review)
4.3
4.3
User Avatar
I am here to bring your product to life. I'm a mechanical engineer and I have 8 experience years. Experience type: 3D, 2D models, Render, Sheet metals, Machine and Devices, industrial product, Plastic molds, plastic parts Software program: Autodesk Inventor,Solidworks, Autocad , NX-Siemens I am always glad to cooperate, I guarantee quick lead-time and free revisions and required. Your project will be developed with speed and high quality, as well as all the jobs already accomplished. Please send me a message.
$1,111 CAD in 15 days
4.6 (7 reviews)
4.4
4.4
User Avatar
Dear Sir, I have experience in mechanical automation mechanism design. Pls contact so we can discuss further. I would like to give you're my concept without cost. Then we can review and proceed next step Thank you, Luat
$950 CAD in 10 days
4.5 (24 reviews)
4.1
4.1
User Avatar
Hi, first of all, I think it's under budget, and the fast way to pick and place is to use delta robot, and for the accurate to pick, you need a machine vision system, then the cost will be very high. I think you should make some rules for how to arrange these objects, then can make the system relatively simple, and reduce the budget. If possible, you can add my skype: kg21xiajun, I'm from China, and I can build the prototype robot if possible, we can tall on the skype, thanks :)
$1,666 CAD in 60 days
5.0 (1 review)
3.4
3.4
User Avatar
Hello sir I read the brief &read through the detailed requirements for the machine,I understand the requirements & can design a solution for the sorter lifter with the specifics that you want. I am a mechanical design engineer with experience in machines design & industrial product designs,I specialize in creating custom machine setups,retrofitting production machines & creating design solutions for mechanisms. I have worked on various industrial mechanism designs & optimized the designs for ease of use & structural integrity. I have worked on a similar sorting mechanism for a belt system in a machine assembly & can create designs for the mechanisms for the sorter as per the specs. I can work with the ideas & spec dimensions for the models or the drawings & create optimized precise concept designs for the machine & then convert the designs into production ready CAD files & engg drawings. You can check the quality of my work in my portfolio https://www.freelancer.in/u/ManchandaDesigns I have queries regarding the requirements & would like to discuss the model further in detail so that I can come up with a action plan and a time-frame for the project with suitable prices I hope I have intrigued your interest,looking forward to hearing more from you about the project. Send me a message and we can open a dialogue of discussion
$1,000 CAD in 16 days
5.0 (2 reviews)
2.6
2.6
User Avatar
We are a team of Engineers (Electrical, Mechanical, Aeronautics), we can assist you in your project from scratch to final product, we can design a robotic arm and its control to suit your needs.
$1,175 CAD in 20 days
4.6 (6 reviews)
3.0
3.0
User Avatar
Hi I am Mechanical Engineer with more than 16 years of experience in machine design. I am willing to help you with your project
$1,250 CAD in 30 days
0.0 (0 reviews)
0.0
0.0
User Avatar
hi, I'm applying for the job you posted. I'm ready to carry out your project and make it unique. ping me for more information kind regards, Boris Guifo.
$1,111 CAD in 15 days
5.0 (1 review)
0.0
0.0
User Avatar
Hello mr. i want proposal you my company Shargo Technology LTD. develop service. The company place in Israel and have great develop team.
$1,472 CAD in 30 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I would like to know whether amount you have allotted for it this bid is for machine OR just design idea?
$1,250 CAD in 20 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I'm a mechanical designer with around 10 years of experience in design field. I have good amount of experience in assembly automation which you are looking for. I have developed many pick and place machines using pneumatics, Epson robots, sensors and pneumatic operated. if interested I can send you the presentation of my projects. looking forward to hear from you.
$1,666 CAD in 30 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello, I have gone through your requirements and I have done Industrial automation and I have other suitable skills to complete this project in 30 days. Regards, Kishor R
$1,500 CAD in 30 days
0.0 (0 reviews)
0.0
0.0
User Avatar
We are small company, with mechanical engineers, electrical engineers, and software developers. We are a team work and We are her to made what you need, with technical support all along the project. We help one of our client to build cnc machines and special machines, we can help you too.
$1,444 CAD in 20 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of CANADA
Canada
0.0
0
Member since Aug 20, 2018

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759) & Freelancer Online India Private Limited (CIN U93000HR2011FTC043854)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.