Find Jobs
Hire Freelancers

Design a PCB with an led array and provide the gerber files

£20-250 GBP

Completed
Posted over 4 years ago

£20-250 GBP

Paid on delivery
This project is made up of a PCB in the shape of a ring(OD:106mm, ID:89mm), with two sets of (75) apa102-2020 SMD LEDS around the ring connected in a single chain. At the top of the ring, on the back of the PCB should be 6 labeled solder pads connecting to +5v, GND, SDI, CKI, SDO, CKO. An example design has been attached, of the sort of design I am looking for.
Project ID: 21709971

About the project

29 proposals
Remote project
Active 4 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
Awarded to:
User Avatar
Hi, Good day! This is Lawrence and I'm able to provide you support in designing the board. Please contact me to discuss more about it. I will be available anytime. Thanks, Lawrence
£30 GBP in 5 days
5.0 (6 reviews)
4.5
4.5
29 freelancers are bidding on average £147 GBP for this job
User Avatar
Hi I am experienced electronics engineer with more than 15 years of experience. I have designed a number of PCBs.I have seen the image attached. Please get in touch to discuss it further. I am waiting for your reply to start Regards
£200 GBP in 7 days
4.8 (267 reviews)
8.0
8.0
User Avatar
Hi, With more than 5 years of experience in PCB design and Circuit design I can guarantee you 100% quality work and before time Delivery. Please message me so that we can capture your requirements and other wishlist along with settings the deadlines. You can also see what other employers like sanjeev and Markus have to say about me in terms of circuit design. Waiting for your message Regards Avi
£100 GBP in 2 days
5.0 (47 reviews)
7.5
7.5
User Avatar
Hello, I will use either Eagle or KICAD as PCB design software for this project. I'm sure we can finish PCB in 1-2 days. I have designed this kind of PCB before and it needs 1-2 days to finish it. I have 8 years experience in PCB design. Let's discuss the details over chat. let me know if you have any questions for me. Best Regards Rijal
£150 GBP in 3 days
4.7 (103 reviews)
6.9
6.9
User Avatar
Hi I am interested to your project. I am familiar with electronics, microcontroller as well as PCB design by Eagle. Thanks.
£80 GBP in 4 days
4.9 (97 reviews)
6.4
6.4
User Avatar
I am an electronic engineer with 20 years of experience. I've done a lot of projects so far. I use Altium for card design. I specialized in analog design, hardware design, renewable energy, microcontroller. I can give you examples if you want. If you have any questions, you can ask. I can use whatsapp and SKYPE to discuss project details and future projects. Please provide your phone number and SKYPE Id. Please come back to me.
£100 GBP in 7 days
4.9 (49 reviews)
6.4
6.4
User Avatar
I have over 35 years experience as an electronic design engineer, please see my profile for more details I believe I could develop this PCB for you. Careful consideration of the power tracks need to be implemented as the total typical current when all on is 4 amps Best Regards Dave Lelievre Poole, Dorset
£250 GBP in 7 days
4.9 (31 reviews)
6.4
6.4
User Avatar
Profile : ---------- over 15 years of experience in PCB layout design. Expertise in EDA layout tools Pads & Allegro. Over 6 years of experience in Ethernet related layout designs with Electrical interface, Optical interface, PHY device, Switch, Processor, DDR, FPGA, Press-fit Backplane connectors, CPLD. Good knowledge on DFM, DFT and DFA Concepts. Exposure to Product development stages. Knowledge in High speed designs, signal integrity, EMI, EMC concepts. Sound knowledge on Component creation, Design Rule settings, Library management and Customer deliverables with documentation. Educational Background : ------------------------ Bachelor Degree in Electronics & Communication Engineering Layout tool supported : ----------------------- PADS Layout 9.5 (Basic) Pads VX2.1 standard ORCAD PCB Designer 16.6 ORCAD PCB Designer 17.2 Pulsonix 10.0 Eagle Kicad Schematic tool supported : -------------------------- Orcad Capture 17.2 Pads Dxdesigner VX2.1 standard Pulsonix 10.0 Eagle Kicad Services Offered : ------------------ Footprint Creation. Netlist Import, DXF Import, Place, Route ,Gerbers and TQ closure. PCB Layout Review. Minimum Required Inputs : ------------------------- A top - level functional block diagram Schematic Netlsit BOM Mechanicals Impedance Information Current Consumption on each voltage rail. Target fabrication house - capability report
£150 GBP in 7 days
5.0 (41 reviews)
6.0
6.0
User Avatar
Dear Sir, I am an embedded systems expert with more than 15 years of experience in firmware development and Prototyping. I am available for this project. Regards Ch Talha
£150 GBP in 10 days
4.5 (55 reviews)
6.2
6.2
User Avatar
Dear you, I have read your requirement. With 7 year-experiment to design cirt cuit in Altium, i will give you the best result. We can discuss more on chatting. Brg!
£100 GBP in 5 days
5.0 (18 reviews)
4.7
4.7
User Avatar
i have more than 6 years experience in embedded PCB design with eagle and altium design software . so i can do your job within a time limit with your satisfaction.
£450 GBP in 10 days
4.8 (8 reviews)
4.9
4.9
User Avatar
Hi sir I am very interested in this job and I have experience in high skill pcb design. I always support first time right designs I done same APA LED strip 2mm and 5mm size
£180 GBP in 5 days
4.8 (15 reviews)
5.0
5.0
User Avatar
hi, i can design this PCB in your required shape as ring ,tool will be KiCad and i will give you gerber file along with whole KiCad files.
£70 GBP in 3 days
4.9 (9 reviews)
4.1
4.1
User Avatar
Hello, You propose an interesting project I would like to take part. I can design for you the ring-like PCB, I have previously designed PCBs oriented to the control and power distribution of LED lights. What is the maximum estimated size of the PCB? Please contact me by chat to discuss the requirements of your PCB. I have a vast experience in electronic design, I have successfully participated in the design of the electronic circuit, BOM research, PCB layout and firmware development for applications related to: IoMT devices, digital signal derivation, IoT devices, power supplies and power distribution. Looking forward to work with you. Best regards, Javier Inojosa.
£120 GBP in 4 days
5.0 (11 reviews)
4.1
4.1
User Avatar
1 ) I have over 15 year experience of PCB Layout / Hardware / RF / EMI / Firmware designs, we can complete various design and layout requirements. # 8051 MCU / ARM Embedded system / Arduino / ST32Fx / IM6x / AVR / TI MSP430x / PIC etc # WIFI / BT / BLE / GPS # LCD / DTV / MD / Web Camera # LED / Lighting # LCD Inverter / Touch ... PCB design and layout. # NIC / LAN / KSZ9031RNX / LAN8720 ... # IOT / NRF52832 / ESP8266 / TI CC26xx ... # Battery / Solar Charger # BMS ( Battery Management System ) # Audio / CSR / Codec / AMP 2 ) I can use as below to design and layout. # Altium # Protel99SE # Eagle # PADS # KiCad # OrCad # Allegro # Proteus # DipTrace 3 ) I can communicate well in English, please contact us by e-mail or s-k-y-p-e me (saludpcb) to find out relevant details. 4 ) I also have to provide PCB layout design service ( super low price ) # For PCB layout: @ 2 ~ 4 Layers -> $0.4 ~ 0.6 USD per pad @ 6 ~ up Layers -> $0.8 ~ 0.8up USD per pad. # For reprinting of schematic and component, quotation will vary by each case. # A minimal of $100 USD 2L / $200 USD 4L / $300 USD 6L will be charged for each case. What I can do are: # 1,2, 3, 4, 6, 8, .... layers ( PCB / FPCB ) # High Speed and High Density PCB layout # Differential Signal PCB layout # RF Signal PCB layout # 3D Models / FreeCad 5 ) PCB / PCBA manufacture # Prototype assembly # Components procurement # High quality # Quick, 24hr lead time # Low cost
£200 GBP in 7 days
4.9 (6 reviews)
4.0
4.0
User Avatar
Hey, I have read the PCB design you required and I am interested to work on the project. I would start working on this if you insist and will complete it as soon as possible. I could also help you with the bill of the material and from where you could order. I could also help with all the electronics doubts with you have.
£25 GBP in 3 days
4.7 (4 reviews)
2.3
2.3
User Avatar
Hi. I've already done similar project and can share the PCB 3D. So, I'm very interested to complete this project and can tell you some additional technical recommendations based on my previous experience. The project has been done in Altium. Thank you.
£200 GBP in 7 days
4.4 (1 review)
0.8
0.8
User Avatar
Hello sir, as an professional embedded designer and developer I have rich experience in designing PCB. I can complete your project efficiently within time limit with my best skills Hoping to work with you!
£200 GBP in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I am electronics engineer with experience of 8 years in PCB designing and layout. I can easily fulfill these requirements. I will be happy to do this as my first project at freelanceer.
£65 GBP in 5 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I have 6 years design pcb experience. I can design the device and pcb. And also prepare documents and files for pcb production in China and Europe.
£150 GBP in 2 days
0.0 (0 reviews)
0.0
0.0
User Avatar
The task of PCB file is completed in the PADS logic and PowerPCB. The gerber file is with completed information of component. (on the back of the PCB should be 6 labeled solder pads connecting to +5v, GND, SDI, CKI, SDO, CKO.) .It is solder lands 2x2mm PAD 2mm pitch for soldering wire. Is it ok.? . If you can give me the PCB outline drawing , that is good for me.
£100 GBP in 7 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of UNITED KINGDOM
Reading, United Kingdom
0.0
0
Payment method verified
Member since Oct 10, 2019

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759) & Freelancer Online India Private Limited (CIN U93000HR2011FTC043854)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.