
Closed
Posted
Paid on delivery
I will send you eight short runs of RG-179 (75 Ω) coax that already have male F-connectors on one end—four straight, four right-angle. What I need is the other end finished with right-angle 75 Ω SMB female connectors (solder-and-crimp style). Please purchase the eight SMB connectors yourself, then cut the cables down so every finished lead measures under 0.5 m when measured connector-tip to connector-tip. At least two different finished lengths are required; we can finalise the exact breakdown once you have the job. You must use the correct crimp dies for RG-179, keep the dielectric clean, and apply proper strain relief. A quick continuity check and visual inspection report before return shipping will be enough for acceptance. Deliverables: • 8 RG-179 cables re-terminated with right-angle SMB-F connectors at the free end • Lengths confirmed against our agreed list, measured end-to-end • Connectors sourced new and documented (datasheet or purchase link) Pack the completed leads securely and return them to me; I’ll cover return shipping costs. If you have any questions about tooling or test requirements, let me know and we can sort out the details.
Project ID: 40780950
11 proposals
Remote project
Active 7 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
11 freelancers are bidding on average $112 AUD for this job

My background in RF design and analysis makes me well suited to re-terminating your RG-179 coaxial leads with care for signal integrity and mechanical reliability. I work in electronic hardware development, including RF PCB layouts, RF filters, splitters, transceivers and power amplifiers, so correct 75 Ω connectivity and clean cable workmanship are directly relevant to my experience. I can source new right-angle 75 Ω SMB female solder-and-crimp connectors, use the appropriate RG-179 crimp tooling, maintain a clean dielectric during preparation, and apply proper strain relief. I will finish all eight leads under 0.5 m connector-tip to connector-tip, provide at least two agreed finished lengths, and document the connector source with a datasheet or purchase link. Each cable will also receive a continuity check and visual inspection report before secure return shipping. My electrical engineering and RF hardware experience provide the precision this termination job requires, and I would be glad to complete the eight leads for you.
$140 AUD in 7 days
6.5
6.5

My engineering-related work and documentation skills support careful, specification-focused handling of your RG-179 cable termination project. I understand that this job depends on accurate end-to-end length confirmation, correct connector documentation, clean workmanship, and a clear inspection report. I will pay close attention to the agreed length breakdown, the required right-angle SMB female connectors, connector sourcing records, and secure return packaging. My attention to detail and documentation experience are well suited to recording the finished measurements and reporting the continuity and visual checks clearly. I would be pleased to handle these eight cable terminations with the care and precision your acceptance requirements call for.
$60 AUD in 1 day
5.5
5.5

I can help with your RG-179 coaxial cable re-termination project, ensuring the eight leads meet your connector, length, and inspection requirements. I understand the importance of using compatible 75 Ω right-angle SMB female connectors and the correct RG-179 crimp tooling. MY APPROACH I’ll source new connectors with datasheets or purchase documentation, trim each cable to the agreed lengths under 0.5 m, and ensure clean dielectric preparation, secure solder-and-crimp termination, and proper strain relief. I’ll perform continuity checks and visual inspections before packaging. DELIVERABLES 8 re-terminated RG-179 cables At least two agreed finished lengths, measured tip-to-tip Connector datasheets or purchase links Continuity results and visual inspection report Secure packaging for return shipping I have 8 years of relevant engineering experience and focus on accurate, reliable technical work. QUESTIONS Do you have a preferred SMB connector manufacturer or part number? What exact length breakdown would you like for the eight leads? Best regards, Sidra https://www.freelancer.pk/u/sidratulm20
$70 AUD in 2 days
3.2
3.2

Thank you for your project post. I can assist with re-terminating your eight RG-179 75 Ω coaxial cables with new right-angle SMB female connectors, ensuring the finished leads meet your agreed lengths and connection requirements. I will confirm connector compatibility with RG-179, source suitable solder-and-crimp connectors, and use the correct crimp tooling and termination procedures to maintain cable integrity, clean dielectric interfaces, and reliable strain relief. I will preserve the existing male F-connectors, including the four straight and four right-angle versions, and trim the cables so every finished lead measures under 0.5 m from connector tip to connector tip, with at least two distinct lengths as agreed. Before dispatch, I will perform continuity checks and visual inspections, document the connector manufacturer and datasheet or purchase source, and provide a report confirming the finished lengths and inspection results. Deliverables Eight re-terminated RG-179, 75 Ω coaxial cables. New right-angle 75 Ω SMB female connectors at the free ends. Four existing straight F-connectors and four existing right-angle F-connectors retained. At least two agreed finished cable lengths, each under 0.5 m end-to-end. Correct RG-179-compatible crimp tooling and suitable strain relief. Continuity-check and visual-inspection report. Connector manufacturer details and datasheet or purchase link. Secure packaging for return shipment. Kind Regards.
$50 AUD in 3 days
0.6
0.6

Hi, My name is Adam. I checked your requirements carefully and understood what you want to do. The key challenge is terminating RG-179 cleanly with right-angle 75 Ω SMB female connectors while maintaining exact sub-0.5 m finished lengths. I will source documented solder-and-crimp connectors, use RG-179-specific dies, protect the dielectric, add proper strain relief, and verify each lead by measurement, continuity testing, and visual inspection. I can start work immediately and complete asap. Best, Adam
$30 AUD in 5 days
0.0
0.0

**Free to jump on this right away, I read your RG-179 to SMB job twice and can start as soon as we agree the lengths** I am Anand. I will re-terminate all eight cables exactly as described, keeping the existing male F-connectors, four straight and four right-angle, untouched. • 8 cables: Each free end finished with a new right-angle 75 Ω SMB female solder-and-crimp connector, using the correct RG-179 crimp dies, clean dielectric prep, and proper strain relief. • Lengths: Every finished lead cut to under 0.5 m measured connector-tip to connector-tip, with at least two different lengths. I will confirm the exact breakdown against your agreed list before cutting. • Connectors: I will source all eight connectors new myself and document them with a datasheet or purchase link for your records. Before return shipping, I will do a continuity check and visual inspection on every lead and send you the report. I will then pack the leads securely for return at your shipping cost. Can you confirm the exact length breakdown you want, and shall I send you the SMB connector link for approval before I buy?
$140 AUD in 7 days
0.0
0.0

To ensure your RG-179 cables meet your specifications, I'll source high-quality 75 Ω SMB female connectors suitable for solder-and-crimp applications. After procurements, I’ll cut the cables to ensure each finished lead measures under 0.5 m, providing you with a mix of lengths as we finalize the exact breakdown. Using the appropriate crimp dies for RG-179, I’ll guarantee a clean dielectric and apply strain relief for durability. A visual inspection report and continuity check will confirm function before shipping. The deliverables will include eight completed cables with the specified connector configurations, confirmed lengths, and documentation for the sourced connectors. I will pack them securely for safe return. Could you specify any preferred manufacturers for the connectors? Liam
$100 AUD in 7 days
0.0
0.0

Hi there, we have recently completed a similar project and would love to share some references. I see you need eight RG-179 cables terminated with right-angle SMB connectors, ensuring the lengths are under 0.5 m. We understand the importance of maintaining the integrity of the dielectric and applying proper strain relief. I will ensure precise terminations using the correct crimp dies, which will result in reliable connections and reduced chances of signal loss. This will save you time and hassle during installation. Here's how we'd approach it: - Source quality SMB connectors and document the purchase - Cut cables to specified lengths, ensuring accuracy - Perform continuity checks and provide a visual inspection report While we might be newer to Freelancer, we bring 9+ years of experience delivering this kind of work off-platform and multiple 5-star reviews to back it up. Feel free to reach out for a no-obligation consultation; I’m happy to offer insights on your project even if you don’t hire us. Kind regards, Alexia
$150 AUD in 7 days
0.0
0.0

Are you looking for RG-179 Coaxial Cable Re-Termination with Right-Angle SMB Female Connectors? I have 12+ years of experience in electronics engineering, RF systems, coaxial cable assembly, and precision electronic connections. I can help complete your eight RG-179 cables with the specified right-angle 75 Ω SMB female connectors while maintaining proper cable integrity and connection quality. I will ensure the connectors are compatible with RG-179 cable, use the correct crimp tooling, keep the dielectric clean, and provide appropriate strain relief. Each cable will be trimmed to the agreed length, under 0.5 m measured connector-tip to connector-tip, with at least two different finished lengths. Deliverables: Eight re-terminated cables: four with straight F-connectors and four with right-angle F-connectors at the existing ends. New right-angle 75 Ω SMB female connectors, with datasheets or purchase references. Confirmed end-to-end lengths for all cables. Continuity checks and a visual inspection report. I will prioritize correct connector compatibility, reliable mechanical termination, and neat workmanship. I can confirm the connector part number, tooling requirements, and final length breakdown before proceeding. I look forward to discussing the details and ensuring the finished cables meet your requirements.
$100 AUD in 4 days
0.0
0.0

Sydney, Australia
Payment method verified
Member since Jul 24, 2026
$30-250 AUD
₹600-1500 INR
£20-250 GBP
₹750-1250 INR / hour
€30-250 EUR
₹37500-75000 INR
$30-250 USD
₹1500-12500 INR
$100-200 USD
£250-750 GBP
$30-250 AUD
$2-8 USD / hour
₹100-400 INR / hour
$15-95 USD / hour
$15-25 USD / hour
₹400-750 INR / hour
$750-1500 USD
$15-25 USD / hour
$30-250 USD
₹400-750 INR / hour
₹1500-12500 INR