
In Progress
Posted
Paid on delivery
NOTE: DO NOT BID VIA BOTS WITHOUT REVIEWING THE ATTACHED DRAWINGS I have already completed a full FEM analysis and produced repair design calculations for an unused landmark water-tower tank. Your task is to take those calculations, verify that the numbers and assumptions are reflected correctly, and turn them into a concise, permit-ready drawing set. Scope • Every element identified in the calculations must appear in the drawings: roof canopy strengthening, tank-top stiffeners, leg-to-shell connections, bracing repairs, and the attached steel signs. • Show weld sizes, bolt grades and spacing, plate dimensions, gussets, and any member replacements or additions exactly as required for a contractor to fabricate and erect. • Base your detailing on the original tower drawings and the recent site measurements I will supply; no fresh structural analysis is expected beyond cross-checking the supplied figures. • All sheets must be prepared in AutoCAD (DWG) and laid out so they can be stamped for permit submission. If you prefer Robot, STAAD, or similar for quick model checks, that is fine, but the deliverable is the CAD drawing set. Must be a P.E with working knowledge AISC, ASCE, FBC 2023 etc. Timeline I need the completed drawing package—including any additional sheets you see are missing from my current index—within 5 calendar days of award. Deliverable checklist 1. General notes and legend sheet. 2. Plan, elevation, and section views locating every repair. 3. Detail call-outs with weld symbols, bolt schedules, and plate data. 4. Connection details for legs, bracing, and signage. 5. Updated revision table referencing the calculation pages. If you have a strong background in structural-steel rehabilitation and can turn precise calculations into clear, buildable drawings on a tight deadline, I am ready to share the full calculation PDF along with the existing DWGs immediately after we start.
Project ID: 40796634
59 proposals
Remote project
Active 2 hours ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
59 freelancers are bidding on average $1,020 USD for this job

AutoCAD drafting and structural engineering are central to my work, making me well suited to convert your completed FEM calculations into a clear, permit-ready steel repair drawing set. I can develop the required plans, elevations, sections, connection details, weld and bolt call-outs, plate dimensions, gussets, member additions, and signage details while preserving the calculation requirements accurately. My experience includes construction drawings, 2D/3D modeling, AutoCAD, Tekla, SolidWorks, and structural engineering. This combination supports precise detailing of the roof canopy, tank-top stiffeners, leg-to-shell connections, bracing repairs, and attached steel signs based on the existing tower drawings and site measurements. I can also prepare the general notes, legend, revision table, and calculation cross-references in an organized DWG package. I am ready to review the supplied drawings and calculations and produce a professional, fabrication-oriented set within your required timeline. Choose me to turn the engineering information into clear, buildable AutoCAD details.
$758 USD in 3 days
7.4
7.4

Hello, Structural-steel rehabilitation drawings require precise CAD detailing, and my AutoCAD, SolidWorks, and Structural Engineering skills align directly with converting your completed calculations into a clear, fabrication-ready permit set. I can translate the supplied repair calculations and original tower drawings into coordinated plans, elevations, sections, connection details, weld and bolt information, plate dimensions, gussets, member additions, bracing repairs, signage attachments, general notes, legends, and revision references. My broader mechanical and engineering support experience also suits a complex existing steel structure where accurate coordination between measured conditions and repair details is essential. I am ready to produce the DWG drawing package within your required five-day schedule and would be pleased to take responsibility for making the calculations readable and buildable for permit review and field execution. Thanks!
$1,500 USD in 6 days
6.3
6.3

I read your project details. I'm very much interested to do this project. I'm already experience in it. You can check my previous works at my portfolio section. Please message me for further discussion. I'll provide some of my previous work sample. I'll deliver required Design file according relevant code in staad pro software and detailed drawing file in tekla software. You will get complete structural solution of following civil structures: 1. RCC Structures (Residential, Commercial, Industrial) 2. Steel Structures (Shed, Multistoried Mezzanine, Silo etc.) 3. Tower (Transmission, Telecommunication) 4. Poles (Steel, SPC) 5. Bridges (Steel, RCC, Composite) 6. Composite Structures (Residential, Commercial, Industrial) 7. Foundation (Single, Combined, Mat, Pile, SPC, Screw etc.) We work with the following Analysis, Drawing and Modeling software: 1. Staad Pro. 2. Etabs 3. MS Tower 4. Auto CAD 5. RAM Connection 6. SketchUp 7. Tekla 8. Revit 9. Robot 10. Advance Steel 11. ASDIP Foundation 12. SAP 13. Tekla Tedds 14. GRASP 15. Staad Foundation 16. CSI Detailing 17. MIDAS Civil
$750 USD in 7 days
6.2
6.2

Hello, I am a structural designer. Have 20 years of experience. I have worked a lot with steel frames Have FL, NY, NJ, PA, WA, TX, AZ and other PE licenses. I can help you with the permit/construction drawings. I use Revit or Autocad. Thanks!
$1,500 USD in 14 days
6.1
6.1

Converting structural calculations into clear, permit-ready steel repair drawings is a core strength of my engineering team. We specialize in structural engineering and construction documentation, with strong AutoCAD capability for producing coordinated plans, elevations, sections, connection details, notes, legends, and revision-controlled permit sets. For your water-tower rehabilitation, I can accurately translate the supplied FEM calculations and original drawings into buildable details covering the canopy, tank-top stiffeners, leg-to-shell connections, bracing repairs, signage supports, welds, bolts, plates, gussets, and member additions or replacements. My experience preparing code-compliant documentation across multiple U.S. states supports careful coordination with jurisdictional requirements and practical contractor-oriented detailing. SolidWorks also provides additional capability for reviewing steel components and connection geometry where useful. I am well suited to organize the complete AutoCAD DWG package, including any necessary sheets missing from the current index, within your required five-day schedule. Choose me to turn your verified calculations into a concise, fabrication-ready permit submission set.
$1,125 USD in 7 days
6.3
6.3

I understand you need a permit-ready drawing set for a steel water tower repair, directly translating existing FEM analysis and repair calculations. My experience in creating clear, compliant structural drawing packages from complex engineering data, as demonstrated in similar projects involving tank and vessel modifications, ensures a precise and efficient output. My approach will involve a thorough review of your provided FEM analysis and repair calculations to meticulously verify all assumptions, material properties, and load cases. I will then utilize AutoCAD to generate a detailed drawing set, ensuring every specified element – including roof canopy strengthening, tank-top stiffeners, leg-to-shell connections, bracing repairs, and steel signs – is accurately represented. All weld sizes, bolt grades, and connection details will be clearly depicted per industry standards and your calculation inputs. To confirm alignment on scope and expectations, could you elaborate on any specific permitting authority requirements or drawing submission formats you anticipate? I'm confident I can deliver a high-quality, accurate drawing package that meets your needs. I'm available to discuss this further at your convenience.
$1,235 USD in 21 days
5.6
5.6

Thank you for the project posting. I have reviewed the provided project documents and understand the scope of the water-tower rehabilitation drawing package. I can assist in translating the supplied FEM analysis and repair calculations into a clear, coordinated, contractor-ready AutoCAD drawing set, ensuring that all specified strengthening, connection, bracing, and signage details are accurately reflected. I would also cross-check the drawing details against the calculation references and original tower drawings. Deliverables: 1. General notes, structural specifications, and drawing legend. 2. Tower overall plans, elevations, and sections showing all repair locations. 3. Roof canopy strengthening details. 4. Tank-top stiffener and reinforcement details. 5. Leg-to-shell connection and bracing repair details. 6. Steel signage attachment and connection details. 7. Weld symbols, bolt grades, spacing, gussets, and plate dimensions. 8. Member replacement and additional steel reinforcement details. 9. Connection schedules and fabrication/erection details. 10. Updated drawing index and revision table referencing structural calculation pages. 11. Final coordinated AutoCAD DWG files and PDF drawing set, prepared for P.E. review and permit submission. Thanks!
$760 USD in 4 days
4.6
4.6

With 13 years of experience in engineering design workflows, structural CAD detailing, and technical documentation, I can help convert your completed FEM calculations into a clear, coordinated, contractor-ready AutoCAD drawing package. I understand the priority is to accurately reflect your existing calculations and tower drawings rather than undertake a new structural analysis. I can organize the repair locations, elevations, sections, connection details, weld symbols, bolt schedules, plate dimensions, bracing modifications, canopy strengthening, and signage attachments, with references to the relevant calculation pages and a complete revision record. Regarding cost, I would prefer to review the calculation PDF, existing DWGs, drawing index, and site measurements before giving you a reliable estimate. I recommend separating the CAD detailing and coordination fee from the Tampa-based Florida PE's independent review and stamping fee. The PE should confirm the technical scope, required revisions, and professional fee directly before agreeing to seal the package. I understand the five-calendar-day deadline and can prioritize an efficient workflow once the files are available. My pricing is flexible and open to discussion based on the actual sheet count, detailing complexity, and PE review requirements. Please share the available files and the PE's expected review process so we can establish a realistic scope, fee, and delivery schedule.
$750 USD in 1 day
3.9
3.9

Hello! I can convert your completed FEM analysis, repair calculations and existing tower drawings into a clear, detailed structural steel repair drawing package in AutoCAD. I will ensure every specified repair, including roof canopy strengthening, tank stiffeners, leg connections, bracing and steel signage, is accurately reflected with proper dimensions, weld symbols, bolt schedules, plate details and fabrication notes, following your supplied calculations and applicable project standards. I have years of experience in structural drafting and engineering detailing and can start working on your project right now, prioritizing accuracy, buildability and your 5 day deadline. I can deliver the complete DWG and PDF drawing package for P.E. review and stamping. Best Regards, Muhammad Abubakar Siddiqui
$750 USD in 1 day
4.1
4.1

Hello, I hope this message finds you well. My name is Rade, and I am a mechanical engineer based in Belgrade, Serbia, with over nine years of experience in the field. I have completed many projects throughout my career, primarily utilizing SolidWorks software. My portfolio showcases several projects across various sectors, including the military, food, and pharmaceutical industries. Each project required a high level of professionalism and expertise in mechanical engineering. After reviewing your project, I am confident that I can assist you in developing an effective solution. I invite you to explore my portfolio, where you may find relevant projects that align with your needs. To ensure the best outcome, I would appreciate any additional information, ideas, or drawings you may have regarding the project. This will help me gain a deeper understanding of your specific goals. I look forward to collaborating on this project and future endeavors. Best regards, Rade
$1,125 USD in 7 days
3.9
3.9

Hi Mate , Good morning! I’ve carefully checked your requirements and really interested in this job. I’m a skillful mechanical engineer by using 3D CAD Software. I’m offering best quality and highest performance at lowest price. I can complete your project on time and your will experience great satisfaction with me. I’m well versed in Solidworks, AutoCAD, Solidworks, AutoCAD, Structural Engineering and Welding and several 3D CAD Software. I have rich experienced in Industrial & Mechanical design. For more information about me, please refer to my portfolios. I’m ready to discuss your project and start immediately. Looking forward to hearing you back and discussing all details.. Please keep me informed
$750 USD in 4 days
3.7
3.7

Structural Steel Repair Drawings – Water Tower Rehabilitation Hi, I can help review your existing structural calculations and prepare a clear, detailed AutoCAD drawing package for the water tower repairs. I can work from your original drawings and site measurements to develop the required plans, sections, connection details, weld specifications, and bolt schedules. Please share the calculation PDF and existing DWG files so I can review the scope, timeline, and requirements.
$750 USD in 7 days
3.3
3.3

Thanks for posting the project. I have 8 years of relevant experience in structural CAD drafting, steel detailing, and engineering documentation. I can convert your completed FEM analysis and repair calculations into a clear, contractor-ready AutoCAD drawing package. I’ll carefully cross-check the supplied dimensions, member sizes, connection requirements, and calculation references against the original tower drawings and site measurements. Deliverables General notes, legends, and drawing index Updated tower plans, elevations, and sections Roof canopy strengthening and tank-top stiffener details Leg-to-shell connections and bracing repair details Steel signage attachment details Weld symbols, bolt schedules, plate dimensions, and fabrication notes Updated revision table referencing calculation pages Editable DWG files and permit-ready PDF sheets I can work within the proposed five-day schedule, subject to the completeness of the supplied calculations and drawings. I want to clarify that I am not a licensed Professional Engineer (P.E.) and cannot provide an engineering seal or take professional responsibility for permit approval. The final technical verification and stamping must be completed by a qualified P.E. familiar with AISC, ASCE, and FBC 2023 requirements. I’d be happy to review the calculation PDF and existing DWGs to confirm the drawing scope and fixed price. Best Regards, Sidra https://www.freelancer.pk/u/sidratulm20
$750 USD in 5 days
2.6
2.6

Hello, I have read drawings Of HOBs and other instructions and found you need Converting structural calculations into precise, fabrication-ready AutoCAD drawings is a core strength of my CAD and structural-engineering work. I prepare detailed 2D/3D technical drawings for engineering and civil projects, with experience using AutoCAD alongside analysis and design software such as ANSYS, ABAQUS, COMSOL, and NX. I can produce the drawing set in DWG format, including general notes, repair locations, leg and bracing connections, signage details, and the additional sheets needed for a complete permit-submission package. I am ready to apply my CAD expertise to this tight, detail-focused rehabilitation project.
$755 USD in 7 days
2.2
2.2

Hello, I am a Mechanical Engineer with over 15 years of experience in industrial steel fabrication, engineering, quality control, and technical documentation. I can convert your completed FEM analysis and repair calculations into a coordinated, fabrication-ready AutoCAD drawing package. Scope of work: • Review calculations, original tower drawings, and site measurements. • Detail roof canopy strengthening and tank-top stiffeners. • Prepare leg-to-shell connections and bracing repairs. • Detail steel sign reinforcement and connections. • Specify plates, members, welds, bolts, spacing, and gussets based on approved calculations. • Prepare general notes, plans, elevations, sections, and fabrication details. • Update drawing index, revision schedule, and calculation references. • Identify missing information and prepare RFIs. Deliverables: Complete DWG files, PDF drawing set, updated drawing index, revision schedule, and calculation-to-drawing cross-reference. I can target your 5-calendar-day deadline, provided all project files, site measurements, and necessary clarifications are supplied promptly. I am familiar with AISC, ASCE, and FBC 2023 requirements and can prepare the drawings for review and approval by your licensed PE. Please confirm that your PE will handle final engineering approval and sealing for permit submission. My goal is to deliver clear, accurate, and practical drawings that minimize fabrication and erection errors. Best regards, Quang,
$1,200 USD in 5 days
2.5
2.5

I can help convert your completed FEM analysis and repair calculations into a clear, coordinated AutoCAD drawing package, ensuring every specified repair is accurately represented for contractor fabrication and erection Experience & Expertise I understand structural steel detailing, rehabilitation drawings, connection documentation, AISC and ASCE requirements, and the importance of coordinating drawings with engineering calculations and site measurements Scope of Work Prepare general notes, legends, plans, elevations, and sections Detail roof canopy strengthening and tank-top stiffeners Document leg-to-shell connections and bracing repairs Detail attached steel signs and all required connections Include weld sizes, bolt grades, spacing, plates, gussets, and member replacements Update revision tables with calculation page references Technical Approach I will coordinate the supplied calculations, original tower drawings, and site measurements, cross-checking dimensions and repair details before preparing the DWG sheets Final Deliverables Complete editable AutoCAD DWG drawing set Permit-submission-ready sheet layout for review and stamping by the responsible licensed P.E. I understand the five-day deadline. The required P.E. licensure, jurisdictional eligibility, and authority to stamp must be confirmed before undertaking sealed permit documents. I can review the calculation PDF and existing DWGs to assess the scope and schedule. Best regards Saima
$750 USD in 6 days
1.4
1.4

Hello, A landmark water tower deserves more than technically correct drawings—it deserves a beautifully organized, fully traceable rehabilitation package that contractors can fabricate confidently and engineers can review efficiently. My approach focuses on three priorities: engineering accuracy, constructability, and permit-ready documentation. 1. FEM-to-DWG Traceability: Create a calculation-to-detail verification matrix linking every repair, connection force, member size, weld requirement, and bolt specification to its original calculation page and final drawing reference. 2. Structural Rehabilitation: Detail roof canopy reinforcement, tank-top stiffeners, leg-to-shell connections, bracing repairs, gusset plates, replacement members, and steel signage attachments. 3. Fabrication-Level Precision: Develop dimensioned AutoCAD details with AWS weld symbols, bolt grades, hole specifications, edge distances, connection schedules, and clearly identified field-versus-shop welds. 4. Code Coordination: Review supplied requirements against AISC 360, ASCE 7, AWS D1.1, and applicable Florida Building Code provisions, documenting discrepancies for P.E. resolution. 5. Quality Assurance: Cross-check original DWGs against site measurements, maintain revision control, and verify every repair appears in plans, sections, details, and schedules. One question: Will the Florida-licensed P.E. responsible for sealing the drawings be provided by your team? Warm regards, Zhai Kun
$750 USD in 5 days
1.3
1.3

Hi, good day. I understand you have completed the FEM analysis and structural repair calculations for a landmark steel water tower and need them translated into a precise, permit-ready AutoCAD drawing package. I can help cross-check the supplied calculations against the original tower drawings and site measurements, then detail all required repairs, including roof canopy strengthening, tank-top stiffeners, leg-to-shell connections, bracing, signage supports, weld specifications, bolt schedules, and plate dimensions. The final DWG set can include coordinated plans, elevations, sections, connection details, general notes, and a revision table referencing the calculation pages, with final review and sealing by a qualified PE. Are the existing calculation sheets and original tower DWGs fully coordinated with the latest site measurements? Best
$1,500 USD in 7 days
0.6
0.6

Hello, As a Licensed Professional Engineer with over 16 years of civil, structural, and MEP experience, I specialize in structural design and complete permit-ready construction documents, directly matching your need to convert verified water-tower repair calculations into a clear, buildable AutoCAD drawing set. My structural steel, analysis, engineering-calculation, and renovation-documentation experience allows me to accurately reflect the specified canopy strengthening, tank-top stiffeners, leg and shell connections, bracing repairs, signage attachments, welds, bolts, plates, gussets, and member replacements. I am highly proficient in AutoCAD and familiar with U.S. building codes, local permitting requirements, and producing drawings suitable for professional review and stamping where required. I can provide a coordinated package including general notes, plans, elevations, sections, connection details, schedules, and a calculation-referenced revision table, with careful attention to constructability and the required five-day timeline. I am ready to deliver precise, permit-focused drawings for this landmark tower repair. Thanks!
$750 USD in 5 days
0.0
0.0

Hello, As a licensed Professional Engineer with structural engineering and AutoCAD expertise, I can convert your completed FEM calculations into a clear, coordinated, permit-ready repair drawing set for the water tower. My experience producing structural details, construction documentation, and permit packages aligns directly with your need for accurate, buildable steel repair drawings. I can document the roof canopy strengthening, tank-top stiffeners, leg-to-shell connections, bracing repairs, signage attachments, and all associated plates, gussets, welds, bolts, spacing, and member additions in DWG format. My structural drafting background supports organized plans, elevations, sections, connection details, general notes, legends, schedules, and revision references based on your existing drawings, measurements, and calculation pages. I am ready to apply careful technical coordination and code-focused documentation to this rehabilitation package and deliver a professional drawing set within your required timeline. Select me to turn the verified calculations into precise drawings suitable for contractor use and permit submission. Thanks!
$750 USD in 5 days
0.0
0.0

Orland, United States
Member since Nov 1, 2017
$250-750 USD
$30-250 USD
$750-1500 USD
$30-250 USD
$250-750 USD
$30-250 USD
$20-80 USD
$250-750 USD
$2000-3000 AUD
₹600-1500 INR
€30-250 EUR
$78-204 USD / hour
$175 USD
$250-750 AUD
$30-250 USD
$30-250 USD
$250-750 USD
$750-1500 USD
$30-250 USD
$10-30 USD
$250-750 USD
$250-750 USD
$15-25 CAD / hour
$250-750 AUD