Construction Engineers For Hire - Page 3
Showing 34 results
Sponsored Freelancers
-
samwije000120 samwije000120
$10 USD / hour
Civil Engineer / Graphic and Presentation DesignerSri LankaPowerpoint, Infographics, Infographic and Powerpoint Slide Designing, Presentations, Civil EngineeringHello everybody, I'm Samitha, a Civil and Construction Engineering graduate from a top-rank university of Curtin University in Australia. I am doing these design works as my hobby and I have professional skills and experience in creative developing and designing. I always give my best service to every buyer. I hope...Hello everybody, I'm Samitha, a Civil and Construction Engineering graduate from a top-rank university of Curtin University in Australia. I am doing these design works as my hobby and I have professional skills and experience in creative developing and designing. I always give my best service to every buyer. I hope that every buyer will be pleased...…!!! Thank you!!!!! less
Hire samwije000120
-
AmanullahAslam AmanullahAslam
$10 USD / hour
Civil & Structure Engineer,(BIM)-AutoCAD-PlanSwiftPakistan?Chartered Civil Engineer Specialist Designer, Member of the American Society of Civil Engineers . Specialist in the following designs and 3D modelling looking here for permanent clients for long-term cooperation. - Civil Engineering Designs and 3D Modeling/REVIT(BIM) - Site and Land Development Designs and 3D...?Chartered Civil Engineer Specialist Designer, Member of the American Society of Civil Engineers . Specialist in the following designs and 3D modelling looking here for permanent clients for long-term cooperation. - Civil Engineering Designs and 3D Modeling/REVIT(BIM) - Site and Land Development Designs and 3D Modeling - Building Design 2D and 3D Modelling - Building Drainage and Sanitary Sewer Designs and 3D Modelling - Construction Estimation - Utilities Design and 3D Modeling, including water, gas, electricity, telecoms, etc. ? Specialist Designer and Draftsman with Autodesk Civil 3D, 2D and 3D AutoCAD, Navisworks and ReCap. My Civil 3D specialisations include: - Civil 3D Construction Drawings, Plots, Layouts, As-builts, etc. ? Reliable, enthusiastic and passionate about engineering and problem-solving. A great communicator who always delivers on time to tight deadlines and within budget. less
Hire AmanullahAslam
-
I have more than 5 years of experience in drawing with AutoCAD (Architecture & MEP plans), 3D modeling with SketchUp and Revit. I can do: -Floor, roof, elevation and section plans drawing. -MEP plans. -3D house modelling. -Rendering.I have more than 5 years of experience in drawing with AutoCAD (Architecture & MEP plans), 3D modeling with SketchUp and Revit. I can do: -Floor, roof, elevation and section plans drawing. -MEP plans. -3D house modelling. -Rendering. less
Hire jostreitenberger
-
Civil Engineering, Construction, Construction Engineering, Engineering Drawing, Structural EngineeringSteel Structures - Concrete Structures - Wood Structures - Shop drawings - If you need any Structural /Civil engineering help in the field of Construction projects you are welcome to my profile. - all types of buildings and homes I can help you to design and detail it - Civil/Structural Engineer with +12 years...Steel Structures - Concrete Structures - Wood Structures - Shop drawings - If you need any Structural /Civil engineering help in the field of Construction projects you are welcome to my profile. - all types of buildings and homes I can help you to design and detail it - Civil/Structural Engineer with +12 years experience in the design and construction of steel and concrete structures. - I have experience in design of industrial, residential and commercial buildings. - I can work with many international codes such as (IBC, ACI , AISC ,ASCE) - I have good experience with these Software ( SAP , STAAD PRO, TEKLA , AUTOCAD, PDMS, ETABS, SAFE , PROKON). I can provide you with the following services with competitive prices : 1- full set of drawing (detailed Design and shop drawings) 2- calculation sheets for steel design and concrete design 3- 3d modeling 4- structural Analysis and design 6- spread sheets for design 7- advice for construction methods - I will always keep give you what you need with high quality and high standards and in the exact time (you will have what you pay for). "Let's work together " less
Hire DavidSparksENG
-
Licensed Professional Engineer , ( STRUCTURAL / CIVIL ) with 7+ years of experience working for an international environmental engineering company with concrete, wood, steel and frp design. James is also a LEED Accredited Professional. Mr. v specializes in all types of structural and civil-related engineering with...Licensed Professional Engineer , ( STRUCTURAL / CIVIL ) with 7+ years of experience working for an international environmental engineering company with concrete, wood, steel and frp design. James is also a LEED Accredited Professional. Mr. v specializes in all types of structural and civil-related engineering with multiple types of building materials in many areas of the world.. James is adept at drainage plans, engineered house plans and the design of all types of structures. He is experienced with geotech reports, specification preparation, CAD/drawing production and structural calculations. James has performed work on three continents and seven countries including the United States, Costa Rica, Panama, Peru, Japan, Jordan, and Trinidad & Tobago. Mr. James STAMPED DRAWING in AL, AZ, AR, CA, CO, CT, DE, DC, FL, GA, HI, ID, IN, IA, KS, KY, LA, ME, MD, MA, MI, MN, MS, MO, NE, NV, NM, NJ, NY, NC, ND, OH, OK, OR, PA, RI, SC, SD, TN, TX, UT, VT, VA, WA, WV, WI and WY. less
Hire james0835
-
Administrative Support, Bill of Materials (BOM) Analysis, Building Engineering, Construction Engineering, Construction MonitoringI am Civil Engineer / Contracts and Commercial Consultant, with over 25 years of extensive experience gained from handling different positions from various local and foreign Engineering, Procurement and Construction Industry (EPC) companies executing various large scale Projects; whereas, over 19 years were focused on...I am Civil Engineer / Contracts and Commercial Consultant, with over 25 years of extensive experience gained from handling different positions from various local and foreign Engineering, Procurement and Construction Industry (EPC) companies executing various large scale Projects; whereas, over 19 years were focused on Contracts and Commercial Management and Project Control. Currently, I am a Contracts Administrator for a large EPC company in Philippines and at the same time a Freelance Contracts and Commercial Consultant for Owners and/or Contractors rendering Contracts and Commercial advisories, administration and managements; whereas, my duties and responsibilities are bulleted below: For Owner Clients: - Review, definition and packaging of Project in accordance to Client requirements and priority - Coordination with Design Consultants and Cost Consultants - Validate and qualify prospective Contractors - Respond to Contractor queries during Tender - Negotiate with probable Contractors for the Final Tender Amount - Drafting of Contract (General Condition, Particular Conditions, Special Conditions) - Implementation, Administration and Management of Contract - Validate and recommendation of Contractor Claims (Progress Billing, Variations, Extension of Time) for Owner Approval - Project Closeout For Contractor Clients: - Review and valuation of Project Package with regards to Project Condition - Raise queries to Owners Representative / Project Managers during Tender - Review and recommend Contract Terms and Conditions - Compliance with Contractual documentations - Administration and Management of Contract - Prepare Contractors Claims (Progress Billing, Variations, Extension of Time) - Project Closeout documentation less
Hire leomilson
-
Architectural Engineering, Architectural Rendering, AutoCAD, AutoCAD Advance Steel, AutoCAD ArchitectureHello, How are you? As a Licensed PE working with talent engineering team, I am pretty sure that this project is suitable for me. We are excited to submit our bid for the your Projects, Our team is dedicated to delivering exceptional results and exceeding expectations. With my rich experience in Civil Engineering,...Hello, How are you? As a Licensed PE working with talent engineering team, I am pretty sure that this project is suitable for me. We are excited to submit our bid for the your Projects, Our team is dedicated to delivering exceptional results and exceeding expectations. With my rich experience in Civil Engineering, Statistics, Research and Report Writing, I can help you perfectly. I will work on the design and will provide you detailed drawing according to the requirements and Building code. What Can I offer you: ✅ Architectural design: Foundation Plan, Floor plan, Elevation, Section, Roof details ✅ Structural Design & Calculations (Wood, Concrete & Steel on Sap2000, Tekla) ✅ Expert in Civil Engineering drawing ✅ MEP (HVAC, Electrical & plumbing) design & drawings. ✅ 2D drafting in AutoCAD/ Revit ✅ High quality 3D modelling rendering ✅ Sketchup Lumion Vray etc. Essential Questions: ✅How soon do you anticipate the commencement of the projects? ✅Are there any specific environmental or regulatory considerations that need to be addressed for these projects? ?I take 100% responsibility for completing my client's work on time I am looking forward to your response. Thanks. less
Hire scott142
-
Hi There This is Sumit and I am proficient in all kind of product design and building architecture work. - Printing & manufacturing ✅ Manufacturing, Injection Molding Design ✅ 3D Printing and laser cutting (STL file revision and DXF file) ✅ CNC programming Using---------------> Solidworks, Inventor, Fusion 360,...Hi There This is Sumit and I am proficient in all kind of product design and building architecture work. - Printing & manufacturing ✅ Manufacturing, Injection Molding Design ✅ 3D Printing and laser cutting (STL file revision and DXF file) ✅ CNC programming Using---------------> Solidworks, Inventor, Fusion 360, SolidEdge, Creo - Building Architecture for Permit drawings and 3D Visuals, Animations ✅ Foundation plan, Floor plan, Roof plan, Site Plan & Landscape Drawings ✅ Interior/Exterior Design and 3D model&Renders Using-------------> 3DS MAX, AutoCAD, Autodesk Revit, Sketchup, Lumion, ArchiCAD, Realtime Architect, Smartdraw - Mechanical/Structure Engineer ✅ CFD, FEM, MEP, HVAC Using Ansys, solidworks, Telka, Etabs Thanks & Regards From Sumit less
Hire Royale
-
I have experience working as a Civil or Structural Engineer in the following markets: -Heavy Civil (underground, bridges, retaining walls, etc...) -Commercial Building -Residential Structures I currently hold PE licenses in: AL, CA , CO , CT , DC , DE , FL , GA , IL , KS , KY , LA , MN , MO , MS , MT , NC , ND , NE ,...I have experience working as a Civil or Structural Engineer in the following markets: -Heavy Civil (underground, bridges, retaining walls, etc...) -Commercial Building -Residential Structures I currently hold PE licenses in: AL, CA , CO , CT , DC , DE , FL , GA , IL , KS , KY , LA , MN , MO , MS , MT , NC , ND , NE , NH , NJ , NM , NV , NY, OH , OK , OR, TX , WV & WY, Some of my Structural Services include: -Structural Analysis and Design -Finite Element Modeling -Plan and 3D Model Production (Revit, Autocad) -Review of concrete and steel shop drawings and submittals -Residential plan review Some of my Civil Services include: -Site Plan Preparation (Autocad, Civil 3D) -Representation of Property Boundaries, Utilities, Topography, and existing features -Grading -Utilities -Review of flood plains and hazard maps -GIS and geoprocessing less
Hire james0563
-
imamdesign24 imamdesign24
$10 USD / hour
building architecture 3d modeling interior designIndonesiaI can create photo realistic exterior and interior render from your sketchup file . i increase the details and make the skp file ready for render and then make background and environment and lighting and texturingI can create photo realistic exterior and interior render from your sketchup file . i increase the details and make the skp file ready for render and then make background and environment and lighting and texturing less
Hire imamdesign24
