Project pcb pic jobs

...have expertise in power electronics and PCB design, with a proven track record of creating efficient and compact power solutions. Input Specification: 220Vac. Output Specifications: Two sections are required: Power Ground Circuit: +15V, +5V. Lower Ground(controller) Circuit: +12V, +5V, +3.3V, -12V. The design must be lightweight and compact, suitable for a portable device. We need the design to be highly reliable and efficient, with considerations for safety and durability. Job Responsibilities: 1) Design: Develop a schematic and board layout for a multi-output power supply that meets the specified requirements. 2) Prototyping: Assemble and test the prototype on a PCB to ensure it meets performance standards. 3) Delivery: Deliver the fully tested PCB to us, in...

I need a PCB for controlling the residential electric current (220VAC) using the following componenets: - ESP32 as microcontroller -1 relay 3VD/220AC as an actuator - LoRa module (SX1278) to communicate with others equipments (already developed and manufactured). - RTC module (DS3231) for getting timeStamp. - An AC/DC currrent transofrmer (220VAC/12VDC) is needed to feed the entire circuit from the same electric source we are controling. - 2 voltage regulator: 12/5VDC and 5/3.3VDC I've design several measurements devices using ESP32, LoRa , RTC to create a monitoring net. This is a first control device that will be inluded. So there are a lot of material that this work can lean on.

...a considerable amount of time to apply the filter. I need this process to be radically sped up, without compromising the quality of the final scan. - Crop - This crop features cropping both length and breadth. If we do not want to crop a pic as a length wise then it would not allow us to do. This project is quite urgent, so I'm looking for someone who can dedicate their time to it immediately. Experience in mobile app development, particularly in the areas of image processing and optimization, will be highly valued. The ideal freelancer for this project should: - Have expertise in both iOS and Android app development - Be proficient in image processing and optimization - Be able to work under tight deadlines - Have a solid understanding of scanner applicati...

I need a PCB designer (KiCad) for modify original design of a STM32 Nucleo64-Board(F302R8/F303RE) in order to add 2 MAX1487 on USART1 & USART3. I already have a working prototybe as a "hat" form factor for the nucleo, so the purpose of this mission is to merge our prototype schematic into the Nucleo schematic and supply a complete KiCad project ready for production (Gerger + steps to reproduce)

...picture of happy guests or a yacht + a good sales pitch 2nd & 3rd Page: Not all needs to be inside, but as much as possible and still looking good - Picture of happy yacht charters guests from the folders below - Different Yachts from those folders: 1. (one pic) 2. (one pic) 3. (Preferred here the biggest and nicest Yachts -> 4-10 pics) - Destination pictures (NO FREE STOCK PICS! -> our IT will check on it): 1. Koh Phi Phi 2. James Bond island 3. Koh Rok 4. Koh Haa - Activities: 1. Stand up paddle boarding 2. Snorkeling

...I'm venturing into a solar-powered USB module in my circuit design utilizing a SAMD51 microcontroller, I'm in need of expert assistance to address some issues with my current PCB design. I have the existing design and fab files at hand, but the project has not achieved its full functionality. - Key Issues: The circuit is experiencing power supply issues presumed to stem from the Voltage regulator, compatibility issues with the microcontroller, and an unresponsive USB output. These are the primary targets for debugging and solution creation. - Ideal Expertise: I am seeking an experienced engineer knowledgeable in PCB design, solar power modules, and the SAMD51 microcontroller. The individual must have a track record of troubleshooting and resolving power...

I need a proficient PCB designer, ideally familiar with ATMEL microcontrollers, to help in circuit prototyping. The circuit is of advanced complexity, consisting of multiple components that interact with each other. Key details: - The project is not basic, it involves multiple components that need to interact. - Familiarity and experience with ATMEL microcontrollers is required. - Despite its complexity, the design will not require integration with any other hardware. The perfect freelancer for this job should have a robust background in PCB designing, particularly for circuit prototyping, and must be a quick problem solver able to identify and correct potential issues swiftly through their design process.

Please Sign Up or Login to see details.

...freelancer who can help me with a project in the industrial sector. The project involves the following: - Specifying the necessary parts for the project - Creating a detailed schematic - Designing a PCB - Generating a 3D model of the project This project requires a high level of precision and accuracy since it's intended for industrial application. Your work will be crucial in ensuring the success of the project. In terms of software, I have not made a decision on which specific software to use yet, so I'm open to your suggestions and expertise in this area. Please keep in mind that I haven't set a specific deadline for the project yet. However, I would appreciate it if you could give me an estimate of the time ...

I am in need of an EMV card reader PCB with Bluetooth capabilities, expressly for the logging of data. Here are the specifications for the task: - Main Purpose: The core purpose of the EMV card reader is Data Logging. - Data Required: The data to be logged includes the Card number and Transaction Details, the Time and location of card usage, plus the Type of card and Cardholder's name. - Storage: The logged data should be stored on the device. For this task, excellent knowledge of PCB design and Bluetooth technology is key, with proven experience in dealing with EMV card readers, along with knowledge of secure local data storage solutions. Familiarity with data privacy regulations is also advantageous, considering the sensitive nature of some of the data to be logged.

...API that will seamlessly integrate with multiple third-party systems, primarily Twitter, Facebook, WhatsApp, Snapchat, and TikTok. Key Responsibilities: - Develop a Chatbot API that can facilitate communication and transactions among different platforms. - Specifically, the API should be able to: - Implement an automated customer service bot using the source file provided understand text and Pic and reply accordingly to the customers in real time using your api and acounts as demo. Ideal Candidate: - Proven experience in API development, particularly within social media and messaging platforms. - Familiarity with Twitter, Facebook, WhatsApp, Snapchat, and TikTok APIs. - Knowledge of chatbot development and the capability to integrate it with the provided source file. - Pri...

I need an expert in PCB design to create a small magnetic levitation motor. My ideal designer would possess stellar skills in: - Microcontroller-based circuit design. - Magnetic levitation systems. - Power efficiency management. The project doesn't require utmost power efficiency, a basic level would suffice. Although compact, this tiny maglev motor device should be firm and durable with functionality on par with larger models. A prototype, design files and instructions for assembly/testing will be essential deliverables. Previous experience working on similar miniaturized projects would be advantageous. Your ingenuity will be crucial in the success of this project. Let’s chat more about how you can help bring my vision to life. This magnetic levitation ...

I am in need of a talented graphic designer to update the graphic element in my brewery's logo. The current logo features black color palette and the main focus of the redesign would be the icon or graphic element. Key requirements: - Freshen up the icon/graph... It’s our towns (Danville CA) logo basically with added as the top of the logo. The other logo is from Treehouse brewing which I just think is really cool and adds character. Not trying to do anything similar to them as I’d like to make ours recognizable even with the refresh, but I feel like ours was a bit generic and quickly put together and would like to improve it. Also added is a pic of the old oak in the middle of our town which is an iconic symbol for Danville. Maybe it could be used for inspiratio...

I need a skilled photo editor to transform a family portrait into a fun and interesting images. Here's what I'm looking for: Either (not all in one photo) - Replace the boy in the picture with a girl and baby Yoda. - Replace dad with Dwayne Joh...impressive The ideal freelancer for this job should be experienced in img2img editing and manipulation in Stable Diffusion. Understanding of humor and creativity is a plus. Blend the image so it looks realistic even with edits. Most importantly, I will need to the model names used and the seed for pictures to take it up from there and edit further. Multiple sumbimissions per person are okay. The pic should look impressive even with the edit Enteries wiithout Stable Diffusion Seed won't be accepted i.e. no other AI genera...

I'm seeking an experienced PCB Design Engineer to develop a small, multilayer PCB using Altium Designer. Requirements: - The PCB should be small in size - The design needs to be multilayered - Proficiency with Altium Designer is essential Please note that the project does not involve any other software beside Altium. The project is urgent, so timely completion is a crucial factor. Ideal Skills: - PCB Design with Altium Designer - Experience with small, multilayered PCBs - A track record of delivering projects on time Looking forward to your proposals.

I'm looking to have a simple and basic circuit designed for a consumer e...basic circuit designed for a consumer electronic device. The main specifications for this project are as follows: - Purpose: The PCB design should be specifically tailored for consumer electronics. - Size: The PCB needs to fit within a compact area, limited to less than 10x10 cm. This will require the designer to be adept at compact and efficient design practices. - Complexity: The circuit itself is rather straightforward, similar to a basic LED circuit. No multi-layer, high-speed signal processing is involved. Ideal skills and experience for this job would include: - Proficiency in consumer electronics PCB design - Strong grasp of basic circuit design principles - Experience wi...

I would love to have a pic of an Asian dragon, Chinese or Indonesian with wings and a long tail that has one hand/claw up and one hand/claw down. I have pasted a rough idea.

I'm looking for a skilled PCB designer to create a simple board for circuit prototyping. Key Requirements: - The design should fit within dimensions ranging from 5x5 cm to 10x10 cm. - The board would primarily include passive components and miniature ssrs, so experience with these is crucial. - No specific components to be included apart from the passive components and miniature ssrs.

PCB design for a scale with a 4G module to send results to WebServer using HTTP Post. Circuit is intended to be powered from battery with a support of solar panel. MCU will STM32 and 4G GSM module will using SIM7000

Looking for an expert in PCB design with hands-on experience in Fusion 360. I have completed a schematic that requires transformation into a PCB layout, adhering to several specific constraints. I am expecting: - Proficiency in Fusion 360. - Ability to accurately follow detailed instructions related to layout constraints. - Extensive understanding of PCB fabrication processes, more specifically conventional PCB fabrication. So, if you consider yourself an seasoned PCB designer with the ability to follow precise specifications, I would love to hear from you. Join me in bringing this project to fruition.

...am in need of a PCB designer with experience in developing multi-layered boards for prototyping purposes. We have an existing design that needs some simple changes. This should be a short/fast project. Key Requirements: - Experience with ESP32-S3 - The design should be optimized for a multi-layer board (two layer if possible) - The board will need to integrate microcontrollers, an ePaper display, and power management components - Experience in designing PCBs for prototyping required - Currently the design uses a TTL connection for uploading firmware Your tasks will include: - Understanding the project requirements and goals - Make necessary updates to design files - Assist software (firmware) team in loading/executing firmware (Arduino IDE) - Designing a multi-l...

I am in need of an industrial automation professional with a specialised experience in PIC programming and equipment integration. The project involves working with hotpress. • Your task will be to program Peripheral Interface Controllers (PIC) and integrate this with our existing equipment. • Further, knowledge in temperature control and pressure monitoring systems for hotpress is essential, as you'll be required to implement these functionalities in our automation system. Ideal skills and experience for this role would be: • Extensive PIC programming experience. • Experience with hotpress equipment. • Sound understanding of temperature control and pressure monitoring in automation systems. Your ability to successfully implement ...

Change the position of CC1101 and then change the size of the enclosure

We are seeking a highly skilled PCB designer to develop a custom board featuring the RP2040 microchip to control multiple DC motors and MOSFETs, with integrated voltage regulation. This project requires expertise in high-power applications, voltage regulation, and serial communications. Project Requirements: Microcontroller: RP2040 chip to manage all operations. Power Handling: Board must handle input of 24V. Voltage Regulation: Conversion of 24V input to 12V and 5V outputs. MOSFETs: 5 MOSFETs for 24V, 7A control. 4 MOSFETs for 12V, 5A control. Communication: USB Type-C for robust serial communication. Inputs and Outputs: 2 analog inputs. 1 One Wire communication interface. Additional pins for digital input/output as required. Deliverables: Complete PCB desig...

Web Developer Needed I am looking for a skilled web developer to create an E-commerce website with custom functionality. Main goal of the website: - E-commerce platform to sell products online Requir...web developer to create an E-commerce website with custom functionality. Main goal of the website: - E-commerce platform to sell products online Requirements for successful freelancers: Need web developer who can develop my website similar to this () within my budget. Point to be noted It should be user friendly interface It should be easier for me to upload pic or edit pricing or comments Design to coding should be done perfectly. Last but not the least PRICING should be within my budget if someone needs higher amount then please don't apply. Thanks

I am in need of an experienced PCB designer who can create a small PCB module with the following features: - ESP32 - SIM module - Gyro - Battery backup with charging port Ideal skills and experience for this job include: - Extensive experience with ESP32 and SIM modules - Proficiency in PCB design software - Knowledge of battery technologies suitable for motorbike use - Understanding of gyro and sensor interfacing - Ability to design a compact PCB (less than 5cm x 5cm) Please provide samples of your past PCB designs in your bid.

I'm seeking a PCB engineer who's proficient at PCB layout design, circuit analysis and troubleshooting, and component sourcing. The project entails: - PCB Layout Design: The project calls for a standard size, multi-layer PCB. The ideal candidate should have the ability to design and implement PCB layouts that are both efficient and effective. - Circuit Analysis and Troubleshooting: The successful candidate will need to be able to analyze and troubleshoot circuits efficiently. They should be knowledgeable in a variety of circuit types and be able to deal with complex circuits. - Component Sourcing: The project also involves sourcing the necessary components for the PCB. The right candidate should be able to locate qua...

I’m looking for a professional to review and optimize my PCB layout design. The aim of this review is to identify any design errors, ensure proper component placement, and validate the power and ground connections. Key tasks include: - Identifying design errors: Your role is to meticulously go through the PCB layout and spot any potential design flaws. - Checking component placement: It's crucial to ensure that all components are correctly placed and oriented as per the design requirements. - Verifying power and ground connections: A thorough check on power and ground connections is vital to eliminate potential circuit issues. Your expertise in PCB layout design, analysis tools and techniques will be a valuable asset for this project. Experience wit...

I'm looking for a unique t-shirt design that relies on a text-based approach. The text should be styled in a classic and cute manner. The design should be primarily focused on the use of two specific colors: pink and green. Ideal skills and experience: NO AI images Looking for a totally new design with picture being the inspirations Use pic for inspiration. i do not want the dame design add Gamma Tau I am Spr. 85 Bethune Cookman University - Graphic design experience, with a specific focus on t-shirt design - Proficiency in text-based design - Ability to create a design that's both classic and cute - Previous experience working with pink and green color schemes would be highly beneficial.

I need an expert in electromagnetic and Particle-In-Cell (PIC) simulation to assist me in running simulations to optimize the performance of a 5-mW-Long Anode Pulse Magnetron. The goal is to study and enhance various performance aspects such as: - Efficiency - Output power - Stability of operation Your task will involve creating a CST file for the entire magnetron based on a paper I'll provide. This is crucial as the simulation outputs will serve as my study material for a higher course. Skills & Experience: - Proficiency in electromagnetic and PIC simulations - Prior experience with magnetron technology - Clear knowledge of CST simulation software (Creating & analyzing files) - Ideally, experience with high-power microwave devices. Finaly I want apply th...

I am looking for someone skilled in the field of STM32 programming, with expertise on Wiz5500. We already have a working firmware running on our custom PCB that uses the Wiz5500 to display a web page with basic interfaces. The project consists in modifying that firmware to integrate two new features : 1) After sending data from webpage to mcu, we cannot use the web browser refresh button because it re-sends the data again. We want to fix this by either re-directing automatically to the main webpage after sending data or some other way you can propose. 2) We want to synchronize the mcu with the local time. This can be done by synchronizing with the NTP server or some other way you can propose. We would like the webpage to keep working during the synchronization with NT...

I’m looking to make a smart controller that can integrate with 12v compressors for inflating tires on off road vehicles. Mainly I need the the pcb and electronics designed and I can make the housing and everything else. If you would also want to design the housing in ok with that. Needs to be almost waterproof. Mainly splash proof and heat resistant. It will be mounted in the engine bay. As far as the controller goes all it need to be able to do is check pressure from a pressure sensor that will be connected in line from the compressor and control a 12v output source(5a at 12v) to trigger the compressor to turn on as well as for deflating need a valve to be controlled to air down to set pressure. Looking for keep it as simple as possible. Only gonna need about 4 buttons. Maybe...

I'm in need of a skilled PCB designer to create a design for a straightforward electrical device focused on temperature control. Key Details: - The main function of the device is temperature control. - I already have in mind the components that I need for the device such as temperature sensors, and cooling/heating elements. - The desired temperature range for the device to control is around 40°C. Desired Skills and Experience: - Proficiency in PCB design, particularly in the context of temperature control devices. - Experience in working with temperature sensors and cooling/heating elements. - Understanding of the thermal dynamics and the design constraints of temperature control devices. - Ability to bring this project to life in a timely and cost-effectiv...

Need back ground changed, so I can place a nice picture on the wall, last pic just want the dogs with no signage in the middle and dogs positioned closer together. Looking for inspiration for these pics. Our dog passed last night and our like a nice picture on the wall

...(wall paper) images for my Property Management Business (Harvard House) For the background image my idea is to create an image similar to the monopoly board, but with names of streets and places in Albuquerque. The most prominent and focused square on the board should be the one labeled Harvard (1) It'd be the square first or second to the right of the corner. (see pic). I'd also would like the board to be angled much like in the pic. If you have a better idea to that angle, I'm open to better ideas to make the Harvard square pop. I was also thinking that maybe only 2/3 or less of the board is visible? Like only the top left down 2/3 to the bottom right visible?(does that make sense?) This will be a background for my website and magnetic signs on my vehi...

I'm looking for a skilled PCB designer to help me repurpose an old laptop keyboard and monitor to work via a desktop host. Key Project Features: - **Repurposing Old Hardware**: The main aim of this project is to make use of an old laptop's keyboard and monitor. The PCB should make it possible to connect these to a desktop host. Ideal Skills and Experience: - **PCB Design**: You need to have a strong background in designing PCBs. It's crucial that the PCB you design supports USB and HDMI connectivity, and allows for key mapping and backlight control for the keyboard integration. - **Embedded Systems**: Experience with embedded systems is a big plus as it helps in seamlessly integrating the keyboard and monitor to the desktop host....

I am personally embarking on my master's project, necessitating an expert in Altium for a basic PCB layout design. While the overall complexity anticipated remains on the basic side with limited components and layers, the designer's prowess in utilizing Altium effectively will be respected and appreciated. Skills and Experience: - Mastery of Altium software - Proven experience in PCB layout design - Affinity for crafting basic designs with few components and layers.

Raspberry PI CM4 carrier board design The project consist in the design of a CM4 carrier board whit specific requirements. All connections with ended with JST connectors, (except the antenna of the AIS, to be decided). The original idea is starting from a existing CM4 carrier board ‘open source’, and modify it to add/remove elements, also ‘open source’. Most of the requirements can be found in any CM4 carrier board available with a public license, for exampe CMIO from raspberry pi. Description of the elements, interfaces and other requirements follows • Maximum board size 100mmx200mm aprox. • Power souce 12v, protected and converted to other DC (present in CMIO) • USB-C with mini USB conector for programming (present in CMIO) ...

We're seeking an individual who can help develop a BLDC motor circuit (with IR / RF) also capable of reverse engineering and conducting comprehensive analyses of each component and...component and functionality, and redesigning them to improve performance and efficiency, someone who can design a working PoC and demonstrate their mastery of the redesigned circuit. - Multi-layer PCB Design - Reverse Engineering - Extensive knowledge of Digital Electronics - Experience working with brushless motors. - Firmware development/coding skills (c, c++, assembly or similar skills) - working knowledge of multiple ICs Once the project is completed, along with the BOM file and GARBER file, the PoC project also has to be submitted. IMP: Freelancers must sign an NDA before begi...

I'm looking for a s...engineer who can assist me in building an intermediate-level electronic prototype. The main objective of this project is to create a functional prototype, which will involve a moderate level of programming. No custom PCB design is necessary for this project. Ideal skills and experience for this job include: - Proficiency in electronic engineering with a focus on prototyping - Strong understanding of Arduino programming - Experience in building electronic prototypes with multiple components - Ability to work on intermediate level projects that require moderate programming - Good problem-solving skills and attention to detail If you think you have the right skills and experience for this project, please submit your proposal with rele...

I've nearly completed a PCB layout using Altium Designer, but need help finalizing it. Key Requirements: - Adding an "On/Off Button": I need an experienced designer to integrate this feature into the design. This will require a deep understanding of PCB layout and design principles to ensure it's correctly implemented. Ideal Skills: - Proficient in Altium Designer: You must have a strong background in using this software to work on the incomplete PCB design. - PCB Design Experience: A solid grasp of PCB design principles and best practices is essential to successfully finish the layout. - Previous Completion Projects: It would be beneficial if you have a track record of completing PCB designs. By taking on this project...

I'm in need of an experienced PCB designer who can modify a trace routing on a PCB gerber file. The specific requirement is to interrupt one of the traces, but ensure it can be easily jumpered. Key Requirements: - Expertise in PCB design and Gerber file modification - Ability to efficiently modify trace routing while maintaining the original design integrity - Understanding of how to create a jumper-friendly trace interruption Ideal Candidate: - Prior experience with similar trace routing modifications - Great attention to detail and an understanding of the importance of trace integrity in PCB design - Ability to communicate effectively to ensure the requirements are fully understood and implemented

This is an extended version project of previous AMS5915 Pressure Sensor PCB with integration to extra features

This project consist of following phases for its prototype development. Phase 1. Hardware Design 1. Schematic design 2. PCB Design 3. BOM (Bill of material) , PCB Gerber 4. PCB Fabrication 5. Components/Part procurement 6. PCB assembly Phase 2. Firmware/Code development and PCB testing Deliverables will be as given below: 1. Source PCB files 2. PCB Geber 3. BOM (Bill of material) 4. Source firmware 5. One working Prototype

I am in need of an industrial automation professional with a specialised experience in PIC programming and equipment integration. The project involves working with hotpress. • Your task will be to program Peripheral Interface Controllers (PIC) and integrate this with our existing equipment. • Further, knowledge in temperature control and pressure monitoring systems for hotpress is essential, as you'll be required to implement these functionalities in our automation system. Ideal skills and experience for this role would be: • Extensive PIC programming experience. • Experience with hotpress equipment. • Sound understanding of temperature control and pressure monitoring in automation systems. Your ability to successfully implement ...

It’s black and white color. Logo Here left side header, right side a menu with points: „home“ „news“ „Vereine“ „Über Uns“ „Für Vereine“ „Für Sponsoren“ Diashow with pics over the full bright of page Under it a logo Diashow with heading „Unsere Vereine“ Under it a germany map with markings on it Next paragraph „Über uns“ with a pic on the left side and a text on the right side . Under it our team „Unser Team“ Under it paragraph our services „ Unsere Leistungen“ Under it paragraph „ Testimonials“ Instagram feed footer with logo and Imprint FAQ Contact Data protection and social link need it now. done today !

We're seeking an individual who can help develop a BLDC motor circuit (with IR / RF) also capable of reverse engineering and conducting comprehen...component and functionality, and redesigning them to improve performance and efficiency, someone who can design a working PoC and demonstrate their mastery of the redesigned circuit. - Multi-layer PCB Design - Reverse Engineering - Extensive knowledge of Digital Electronics - Experience working with brushless motors. - Firmware development/coding skills (c, c++, assembly or similar skills) - working knowledge of multiple IC's Once the project is completed, along with the BOM file and GARBER file, PoC project also has to be submitted. IMP: Freelancer must sign an NDA before begin working on the project...

Create PCB with eps32 and relay in Easy eda

...it with a 4G mobile module (SIM7600 or equivalent that work in Australia/Telstra). - 1 X Sim slot. - 2 X External antenna connectors SMA - 1 X Power LED for CM4 - 1 X Activity LED for CM4 - 1 X Multicolour LED for signal strength of mobile module. - The carrier board should be made as small as possible. Skills and experience: - Freelancers interested need proficiency in electronics and PCB design, along with a deep understanding of Raspberry Pi Compute Module 4. Experience in custom carrier board design and SIM7600 or equivalent 4G mobile module that works in Australia on Telstra also required. The freelancer would be expected to have sample units manufactured and tested for functionality (third party manufacturer ok - Cost will be paid by me). - Applicants able to de...

I require the development of a Printed Circuit Board (PCB) based on provided schematics and design guidelin. This PCB is specifically designed to amplify signals from a silicon PIN diode used to sense gamma radiation. Top Features: A PIN photodiode, four low-noise op amps and a comparator are used to detect individual photons of gamma radiation. Expertise: - A solid background in PCB design and experience in providing PCB manufacturing data Expected output: • Schematic and Source data in EAGLE or Protel 98/99/SE/Altium/Protel-DXP format. • Extended Gerber File RS-274X. • Bill of Materials (BOM) in Excel format, based on components from Digikey or Mouser. • Pick-N-Place / XY-File. Please share relevant experience and sample work.