Configure SIP and pri on a Cisco 2651XM Router

SSH to router is available I want to be able to send sip calls which will then dial out via pri (s) crouter>sh controllers e1 E1 1/0 is up. Applique type is Channelized E1 - balanced No alarms detected. alarm-trigger is not set Version info Firmware: 20090113, FPGA: 20, spm_count = 0 Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line. CRC Threshold is 320. Reported from firmware is 320. Data in current interval (652 seconds elapsed): 4 Line Code Violations, 13 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 498 Unavail Secs Total Data (last 24 hours) 0 Line Code Violations, 0 Path Code Violations, 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins, 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 86400 Unavail Secs