Count pulses using harware interrupts

Hello. Greetings of Peace. I have great experience of developing custom electronics systems. I have developed an automation for a solar plant and have created many other industrial solutions. I have also won World Arduino UNO Wi-Fi contest for developing pressure regulatory system using custom designed Arduino. Recently I have designed a data logger where I used an external interrupt for counting the 8 pulses using ATmega2560. We can use the edge interrupt trigger method and thus can read many pulses at the same time. Let's connect and get it done. Thus, I can give you one-stop solution from prototyping to manufacturing. I would like to have an opportunity to work with you and would love to discuss your requirements in detail. Please have a look at my portfolio for my detail work. https://www.freelancer.com/u/krunalbhongade.html Please check the first entry named Data acquisition system, where I use pulse counting. Thanks and Regards, Bk Krunal

Hi Sir, We are best in embedded systems. so talk to us and consider the job is done. We are professional engineers and developers who do such projects from the last eight years. We offer you our skills for this project at very low rates comparatively without compromising the quality of work. Let me introduce you to our company TURKTRONICS. We are TURKTRONICS. We are professionals with 8+ years of experience in Circuit designs, PCB designs, embedded system solutions, mobile app development, programming and software development. We provide complete end to end solutions for all kind of development projects. IOT is our strong point. In this bid, prototyping and shipping cost is not included however paying extra slight of money to include prototypes. We have collaboration with Atechcircuits & WELLS Inc in Shenzhen China for excillent quality PCB manufacturing. We care about our clients and help them to get out of any potential problem throughout the projects and also give post completion technical support if ever required. We are very much looking forward to hear from you on this in coming days! Cheers!!! Ahmad Lead Technical Engineer TURKTRONICS An Internet of Things Company !

Hello I have experience in designing electronics circuits and can make your project. For your assurance, i can just say that, "I AM IN CHINA RIGHT NOW AND I CAN SHIP COMPLETE WORKING PROTOTYPE TO YOU AND WILL GET THE PAYMENT AFTER YOU WILL RECEIVE THE PROTOTYPE AND WILL BE SATISFIED WITH IT." Thanks

Hi. I propose to develop this in Linux using the avr-gcc compiler - trying to keep the number of EEPROM writes to a sensible level. I usually don't use an IDE - although I can use Arduino IDE if you prefer. (Atmel Studio doesn't run on Linux). I can provide a Makefile to assist compilation. Please provide more details (e.g., the specific interrupts you want to monitor, desired oscillator configuration, etc.) if / when you have time. Are you using the Arduino MEGA? I don't have this exact microcontroller, but can purchase a ARDUINO MEGA 2560 (or clone) if necessary. In the meantime, I can test on a micro with similar architecture (e.g. ATmega1284P) or use a simulator (simavr). I suggested 5 days as a timeframe - but it might not take that long. Without more details I just can't say however. I am based in Ireland.

Hello, I could provide you the code in less than 1 day if you choose me. what kind of IDE you might refer to use? Eclipse, Arduino IDE, or CodeVision AVR? Let me know the detail of your project over the chat. Regards, Rijal

Hi, I dont know what happens and why i cant contact you in through inbox. I think my bid is removed some how or i mistakenly remove it while changing. "Hi, It is to inform you that i completed code for INT0 pin. There are 8 ISR vectors for INT0 to INT7 and three ISR vectors for all pin change interrupts. so ideally we can only have 11 ISR. we need to tweak PC ISR to know which pins is receiving signal and if two pins related to one ISR will receive pulse then code will not understand what to do."

I am an electronic engineer with more than 10 years of experience. I have worked on several similar projects and can work on this. I can provide you with the code for ATmega2560 and help you set it up. Are you using arduino or only atmega2560. please contact me to discuss details

Hi, I'm an electronic engineer with more than 5 years of experience in Arduino programming. I have indepth knowledge on Arduino so I can do manual manipulations on atmega2560 internal registers and get the job done for interrupts. I have done this type of work for receiving and emitting IR codes for TV remotes. So I can assure you that I'm knowledgeable with this type of work. I'm looking forward to hear from you. Thank you Anusha

Hi, I am an embedded system designer. I have worked on Atmega controllers. I have used atmel studio for Atmel/AVR programming. If you have any question for me please ask. Before starting we shall discuss the project, lets get started then.

Dear Sir, We are a small R & D company, based in Bulgaria, Europe. We specialize in developing Embed systems based ST(STM32),Microchip (Atmel – AVR,ARM) and TI (MSP430) MCPUs and peripheries. For our mobile projects use nRF51/52xxx and CC2540/41 BLEs. We realize projects with requirements similar to yours. See and my profile in Freelancer.com Our tools for develop STM32 based system are: Our tools for develop Atmel MCPUs based system are : Atmel studio 7 IAR Embedded Workbench for Atmel AVR 7.10 Bread board for ATMega2560 JTAGICE3 - emulator If we receive more information about your project, we will give you a real cost and time to implement your project. Note: We based in Europe,Bulgaria - not customs problems and taxes for delivery models and samples for testing and build prototypes. Best Valeri T

I had done lots of projects in Atmega Series in C and ASM Language i know more on internal architecture of the Controller i can write in Assembly if you want or code compilable in Arduino IDE

I have worked alot with ATmega micro controllers and programming their interrupts. I can help you with your project. Thank you.

hi, how are you?? are you fine?? i hope so ^_^ my name is Hesham Omar, i am an embedded system software engineer, i have been working on many projects that depending on AVR micro-controllers and you could see samples of them on my profile and portfolio. with respect to your job i could do it easily in less than two days also before arriving the code for you i will completely test it to ensure from performing its function also i will be available to support you during testing code by yourself to edit or change any new requirements. thanks for reading my proposal and i hope you find it well and start working together. regards

I had experience in AVR microcontroller. I had 7 years of industrial experience in Embedded firmware coding (C language & Assembly) without using libraries. I can count pulses using hardware interrupts and store that count in internal EEPROM or external EEPROM

Hi, I have 35 years experience in embedded development. I would like to help you reach your goal. Thank you to consider my bid.

as per your requirment i had experience in hardware. and also work on arduino. i can make this project in time

I think I can resolve the problem. Hardware Interrupt is used in many products. I am expert in AVR/Circuit design. I have more than 19 years experience. Please contact me if you interesting my bid.

A proposal has not yet been provided

I have years of experience with working with the arduino ecosystem, and counting intrerupts is something I've done countless times for various projects (pun intended)