structural engineer
$10-30 AUD
Paid on delivery
Design Problem – Silhouette Installation
The engineer is asked to provide a structural design for a life sized steel plate silhouette to be installed at Eneabba. The silhouette will be fabricated from steel plate. A drawing showing the shape of the life sized silhouette is attached. I have marked the area of the shape on the drawing which is 1.17m2 total for the man.
Please check the life sized man silhouette structure for the following wind loading requirements:
1. Region B – Eneabba. The Terrain Category at the site has been taken as 2. Importance level 2. Ultimate wind speed 57m/s (205km/hr).
2. The annual probability of exceedance of the wind event has been calculated as 1:500.
3. The design life of the structure has been taken as 50 years.
Please let us know if:
1. The life sized man silhouette can be fabricated from a minimum 8mm thick 250MPa mild steel plate.
2. Will the man silhouette need stiffeners fully welded to the back of the silhouette 8mm plate and fully welded to base plate.
3. The silhouette plate shall be fully welded to 400x400x8mm base plate and stiffened with 2 x 100x100x8mm gusset plates. Base plates shall each be fixed to concrete footings with 4 x M16 chemical anchors. Please specify concrete footing size.
Project ID: #29894334
About the project
5 freelancers are bidding on average $47 for this job
Hi, I'm capable to do the job and interested in your project. Please send me a message so that we can discuss more details. The price can be discussed later on. Don't hesitate to contact me.
STRUCTURAL ENGINEER WITH 12 YEARS EXPERIENCED IN THE FIELD OF CIVIL AND STRUCTURAL ENGINEERING CAPABLE OF DESIGN AND ANALYSE ANY TYPE OF STRUCTURES
