3D Modelling of Power bank

Dear Modeller, Please read all parts of the brief below as it will help us both to run this project smoothly and with a positive attitude. Note: This is a purely modelling project! 1. What you need to create: To produce 3D data of a power bank that will be rendered by our in-house designer. We don’t have requirements for the software you will use (Maya, 3dsMax, Modo, Blender etc.) but we require from you a file type that can be imported in Keyshot. You must provide accessible either OBJ or 3DS files. It must be to scale and you can also find the dimensions in the attached datasheet 140 x 72 x 15mm (HxWxD) Apart from creating the general exterior of the product we also need you to create: a) LED percentage indicator light – LED MUST display 100 b) USB port – each inner part should be a separate object. It must look real if we export a close up render. Please therefore also create the metal pins. c) Micro USB charging port – as point b. d) All parts of the Chassis (frame) must be separate geometry. (as the top panel is glossy black plastic, and second part soft rubber touch material, so I will need to apply different materials in Keyshot). e) Power Button must have an embossed power icon. f) STK logo (vector artwork will be supplied - png, svg, eps) Note: when rendered the object must look smooth with no faceted edges . 2. What you don’t need to do: a) We do not need you to add any lighting, texturing to the model b) Also please avoid the use of any triangulate options (in your software) when creating or exporting geometry as it causes serious issues in Keyshot. Example: when exporting in Blender there should not be a tick on ‘Triangulate Faces’. c) You are not required to create detailed internal parts apart from those mentioned in point 1. 3. How we will support: We will send a selection of product images, including a product datasheet. If you have any questions will be readily available to answer. Looking forward to hearing from you!