Arduino raspberry pi data logger jobs
I'm in need of an experienced Arduino ESP32 developer who can create a software for me. This software should primarily support GPS and LTE communications for the purpose of tracking and navigation. The device is a and I can supply a testing device to you. The code has to open 2 simultaneous connections to the SIM7670G chip on the ESP32 at the same time. On port1, it has to read the GPS position every second and build up at Lat Long Array in memory. When this gets to 60 points, it triggers another 'thread' to create a polyine of these points and then sends this polyline to a server using TCPIP. Note that while the TCP Send is in progress which can take up to 10 seconds, the other thread is still catching the GPS points every second, so we
I'm looking for a skilled Arduino developer to help me create a fault detection system for AC supply. The system should be able to identify possible faults including short circuit, open circuit, phase loss and other related issues. Key components: - I've decided to use an ESP32 board instead of the conventional Arduino boards for this project. - The current sensor I'd like to implement includes ZMPT101B and ACS712. - The voltage sensor I'd prefer to use are the ZMPT101B and ACS712. Your tasks would include: - Writing the code required for the ESP32 board to interface with the current and voltage sensors. - Creating the fault detection algorithms in the code. Ideal skills and experience: - Proficiency with Arduino and ESP32 development. - Experie...
I want 3d Simulation or rendering of smart inventory control system, in which lift mechanism connected with vibration sensors and conveyor is connected with ultrasonic sensor along with Arduino uno, esp wifi module, screen and motor driver all in software.
I am in search of an expert in the integration of RPLIDAR with Raspberry Pi for the purpose of navigation and obstacle avoidance in a medium-sized environment like an office building. More specifically, the freelancer is required to: - Program the Raspberry Pi to operate the RPLIDAR. - Create an algorithm or a method that can take in real-time data from the RPLIDAR and efficiently convert it into a visual, real-time map. - Use the mapped data for navigation and obstacle avoidance by the Raspberry Pi. Ideal Skills and Experience: - Proficiency in working with Raspberry Pi. - Experience in programming RPLIDAR. - Good working knowledge of obstacle avoidance algorithms. - Proven experience in navigation systems, particu...
I have an existing Arduino and BBC Micro:bit devices and I'm seeking a skilled freelancer to help me connect them for a home automation project. Key Responsibilities: - Implement a system that can control lighting, monitor temperature and provide security surveillance - Ensure the system can be powered using solar, wind, battery and be connected to the internet. The ideal candidate should have experience in: - Arduino and BBC Micro:bit programming - Home Automation projects - Solar and wind energy integration - Internet of Things (IoT) connectivity - Strong understanding of security surveillance systems Your role will involve setting up a reliable, efficient and user-friendly home automation system. The ability to integrate multiple power sources and ensure the syste...
I have a desktop application made using Electron software for electrochemistry experiments and I'm looking for a skilled front-end developer to help with software packaging and COM port detection. Ideal Skills and Experience: - Expertise in Front-End Development, specifically with Javascript and HTML - Experience with Electron software - Prior experience with arduino and python, a bonus - Strong understanding of software packaging in Electron applications The application should be compatible with Windows operating system. I need help fixing certain issues like the selecting the COM Port, the functionality needs to be re-written so that it is performed by Electron's WebAPI rather than Python(current). The start-up image must be the company logo. I need help in packagi...
pI am looking for an experienced software developer to create a PVC software for me. The core features required are: - PDF data extraction and printing: The software should have the capability to extract both text and images from PDF files and facilitate printing of the same. Proficiency in PDF manipulation tools is highly desired. - Image extraction and printing: in addition to text, the software should efficiently extract images for printing. - Localization: The software should fully support localization for all local Indian languages, with specific advantages in Hindi, Tamil, and Bengali. Understanding of the cultural context and linguistic nuances associated with these languages is a bonus. Ideal candidates will have a strong background in software development and p...
I'm seeking a knowledgeable Arduino and IoT expert to create a sophisticated system for collecting data on water flow. Key functionalities required: - Pulse input data collection, specifically for monitoring water flow. - Understanding of Deep Sleep Mode to save Battery. - Data handling capabilities to efficiently send this information straight to the cloud system. The ideal freelancer for this project must demonstrate vast experience with Arduino programming, IoT systems, and data management. Familiarity with cloud technologies will be a significant plus. Ability to create a robust system capable of handling potential fluctuations in water flow is necessary. The chosen developer will be tasked with not just simple data gathering, b...
I am aiming to have a pi zero programmed to read voltage levels from a 12-volt battery bank. The trigger to start the generator should be a low voltage condition. The purpose of this project is to remotely start the generator, with a focus on maintaining efficiency and practicality through a direct physical connection. Key objectives include: - Programming the pi zero to accurately gauge low voltage conditions - Enabling the generator to automatically power up in case of a drop in voltage. - Continuing the generator input even after the voltage returns to normal, with this feature designed to maintain a steady and reliable power supply. Ideal Freelancer Skills: - In-depth understanding of Raspberry Pi Zero programming for hardware operations - Knowledge in ...
...project that requires interfacing a Raspberry Pi with a Panasonic Servo Driver. I need a professional to perform the following tasks: - Setting up Modbus communication between Raspberry Pi and Panasonic Servo Driver (Model Number: MDDLT55SF) - Setting up CC-Link IE TSN communication between Raspberry Pi and Mitsubishi Driver (Model:MR-J5W3-222G) - Writing code for controlling the servo driver from the Raspberry Pi - Testing and debugging the system - Providing support for any issues that may arise during the project Previous experience with Raspberry Pi and Panasonic Servo Drivers is a must. Additionally, the ideal candidate will have a strong understanding of programming in Python, as well as a background in robot...
I need to wrap a label (fictitious) on a soup can - the label is already created with aspect ratio of Pi - once the label is applied to the can, the can needs to rotate 360 degrees so we can see all parts of the label. I want a photo realistic render at 4K with an alpha channel so I can layer it onto a background if I choose to. I will need a few 6K still renders also. I have attached a few of the photoshop mock-ups I have created.
...you were to pass the second logic test, and $50 (Fifty Dollars) if you were to pass the third logic test. ✻ OBTAINING SUPPLIES ✻ I will send you approximately $50 (Fifty Dollars) so that you can purchase ESP32 development boards, breadboards, components (such as resistors, transistors, and capacitors), wires, etc. on a site such as AliExpress, Mercado Libre, etc. The ESP32 is similar to an Arduino. I realize it may take you up to 30 (thirty) days to obtain these items. That's fine with me. However, I will * not * help you deal with corrupt local customs officials who require bribes to release goods. Any “horror stories” you might have heard or read about corrupt local customs officials in your country requiring bribes to release goods probably were for item...
I am seeking an experienced engineer to design and implement a two-axis machine control system that is capable of: - Effectively controlling and managing the mov...mechanisms particular to these types of systems is a must. Ideal expertise for the job includes: - Comprehensive knowledge in machine systems control and design. - A thorough understanding of motion control strategies. - A background in data analysis and logs processing. The machine is a Bandsaw to cut small logs into planks. The 2-off, NEMA 23 stepper motor movements are sequential, ie, first one moves then the second stepper moves. The controller is a Raspberry Pi 4, the prefered language is Python. Input to the controller via R Pi 7inch Touchscreen. File is to big to attach ...
I am seeking an experienced engineer to design and implement a two-axis machine control system that is capable of: - Effectively controlling and managing the movements o...feedback mechanisms particular to these types of systems is a must. Ideal expertise for the job includes: - Comprehensive knowledge in machine systems control and design. - A thorough understanding of motion control strategies. - A background in data analysis and logs processing. The machine is a Bandsaw to cut small logs into planks. The 2-off, NEMA 23 stepper motor movements are sequential, ie, first one moves then the second stepper moves. The controller is a Raspberry Pi 4, the prefered language is Python. Input to the controller via R Pi 7inch Touchscreen. File is to big to attac...
...Natural Language Processing: The platform should possess advanced natural language processing capabilities. - Voice Chat: The ability for the platform to support voice-based communication. - Image and Multimedia: The platform should support a range of multimedia options, from text to photo uploads. Platform Support: The mobile application should support the interface and experience similar to that of Pi from Inflection AI or ChatGPT from OpenAI. Design: The design should be sleek and modern, catering to a professional and tech-savvy audience. Ideal Skills and Experience: - Proficiency in natural language processing and machine learning - Strong UI/UX design background - Extensive experience in mobile application development - Familiarity with platforms such as Inflection Ai or...
I am currently developing the field oriented control system for a permanent magnet synchronous motor. My goal is to improve the speed response, specifically the acceleration time, deceleration time, and steady state error. The project involves the tuning of PI controllers within the system, meant to enhance its overall performance. For this task, a proficient knowledge of control systems, system modeling, and tuning methods is required. Previous experience with PI tuning is beneficial. Currently, MATLAB/Simulink is being used for modeling and system simulation, hence proficiency in it is crucial. Ideally, the candidate will have extensive experience using MATLAB for complex motor control simulations. However, I haven't defined the specific tuning methods to be used w...
I am looking for an expert with solid experience in Fiel...looking for an expert with solid experience in Field Oriented Control (FOC) of Permanent Magnet Synchronous Motors (PMSM) who can help tune my PI controllers for more precise speed control. Here are the specifics: - I have an established model using MATLAB/Simulink, and the PI controllers are already implemented. - The key outcome I want is to enhance the accuracy of the speed response. The ideal candidate will have: - Extensive knowledge and experience with PMSM and FOC. - Proven background in tuning PI controllers. - Strong proficiency in MATLAB/Simulink. Your task will involve analyzing the existing model, suggesting enhancements for the PI controllers, and implementing these changes to achieve...
Job Description: We are seeking an experienced software developer to create code for a power electronics control system. The project involves using an Arduino DUE and the IMC101T T038 motor controller. The software should control and regulate both the grid side and machine side using Space Vector PWM (SVPWM). Communication between the Arduino and other components will be handled via serial communication. Additionally, the system should include a quadrant display using 4 LEDs to indicate whether it is operating in motor or generator mode. All datasheets and circuit diagrams will be provided. Key Responsibilities: Control and Regulation: Implement SVPWM on both grid and machine sides. Grid-side control: Adjustable power factor (cos(φ)), current, and power. Machine-side c...
I'm looking for an experienced Arduino and ESP32 LVGL programmer who is able to Build arduino code for a Waveshare ESP32 s3 Touch LCD 4.3 and recognize data from I2C ADS1115 interface a display grafically Display have to rappresent data in 4 different page changeable touching icons placed in down part of display In each page are displayed more rounded bar with % value received from 3 x ads1115 i2c connected Key Responsibilities: - Program the ESP32 to recognize and interpret the data from the I2C ADS1115 sensor module - Integrate a responsive touchscreen control and an LCD display on the Waveshare ESP32 s3 Touch LCD 4.3 - Ensure the system is user-friendly and able to display the sensor readings accurately - Implement the system in a way that is ...
...specifically in system-level assembly language. Knowledgeable in gaming input emulation and keyboard input simulation. Experience in backend applications is beneficial. Project Specifics: The emulator must not breach game firewall securities or require unauthorized system modifications such as disabling driver signature enforcement. It should operate successfully in the game, similar to devices like Arduino Leonardo or ESP32. The goal is to simulate pressing the Z1 keys solely through software, without external devices. Activation should be tied to the Caps Lock LED status—active when on, and inactive when off. Solutions utilizing 'keybd_event' and 'SendInput' do not meet the requirements of this project; a deeper, more intrinsic approach is necessary. ...
I need a technical expert skilled in Raspberry Pi integrations to create a display of GPS coordinates, IMU data, and set the frequency for a TBS satellite receiver on a 7inch LCD screen. The components for this project are: - GPS module - IMU module - TBS satellite receiver The LCD display should show GPS coordinates and IMU data in real-time. It also needs to set the frequency for the TBS satellite receiver. The Raspberry Pi setup will be powered by a battery, so considering power consumption in the build is important. Ideal skills for this job would include: - Experience with Raspberry Pi integrations - Familiarity with GPS modules and IMU modules - Knowledge of frequencies for TBS satellite receivers - Proficient in power man...
We are seeking an experienced skilled Raspberry Pi developer for an exciting machine workflow using Raspberry Pi and servo motors. The project involves developing software for control, and integrating the Modbus TCP/IP protocol. The successful candidate will demonstrate expertise in Python programming, servo control, and Modbus communication. Phase 1: Set up the Raspberry Pi 4b to control servo motors and configuring communication with the Panasonic Minas Driver and Panasonic Servo Motor. Install Modbus server software and develop custom Python scripts for Modbus communication and servo motor control. Phase 2: Control Iron Core Linear motors and configuring communication with the Mitsubishi Driver . This can turn into a long term project for ...
...seasoned freelancer to devise a Derby car timer using Arduino Uno. The expected outcome will be a two-lane track device, with the ability to dictate the start and end of races, as well as display grades systematically. Key Features Needed: - Start Line Servo: To exhibit a complete rotation signaling the race's commencement. - Finish Line Infrared Sensors: These will be strategically positioned to detect the end of the competition. - Two-Lane Implementation: The structure should accommodate a dual lane setup. - Display: 7-Segment LED HT16K33 Backpack above each lane to show timing results. - Winner Identification Feature: An 8x8 matrix screen for indicating 1st and 2nd place finishes. Ideal Skills and Qualifications: - Working knowledge of Arduino programming languag...
...Requirements: - Transparent Display: The display needs to be integrated in front of a small lens, which will then be in front of an image sensor. The display will serve as the light source, allowing light to reflect off the sample. - Raspberry Pi Integration: The device should be able to stream footage through a Raspberry Pi. Ideal Skills and Experience: - Prior experience in designing and building similar handheld devices or microscopes. - Knowledge of integrating transparent displays and image sensors. - Proficiency in programming and working with Raspberry Pi would be a plus. - Understanding of scientific research needs and standards. The ideal candidate for this project should be able to assist with the full development cycle f...
I am in need of an experienced electrical engineer to assist with spec'ing an electrical system. The system design. -I am needing to control a Nema17 stepper motor and 300watt BLDC Motor. -I already have the motors selected and the drivers for each motor. -I am wanting to use an arduino microcontroller for the controls. -I require the power supply to be as small as possible, but still being well within in a safe range of the power demand of the system. Refer to addition info regarding the sizing, or have a discussion with me on possibilities. -Additional peripheral components: 3 x Push Button, 1 x power switch, 1 x small display screen. 2 x Limit switches. What I need done. I need a freelancer to design and spec the unspecified components around the ones that are al...
I'm looking for an experienced firmware developer specializing in STM32 microcontrollers. I already have arduino Mega tested code which i need to convert into stm32 family Key Project Details: - Specific STM32 Model: The project will involve firmware development for a specific STM32 microcontroller model. - Application/Use Case: While not specified, the project likely involves a real-world application within the realm of consumer electronics, industrial automation, or wearable devices. Skills & Experience: - Prior experience with STM32 microcontrollers is essential. - Proficiency in utilizing various communication protocols (e.g. UART, SPI) and integrating sensors would be a plus. - Familiarity with power management techniques is highly desirable. - Experience with the ...
Build an ISO for a raspberry pi (with cellular notecard) to scan for unique cell phones in a specific range and log the unique phone ID and timestamps/ping (distance) from the raspberry pi and store in mysql database using cellular adapter.
I need to design a tracker control unit for the 137 MHz band antenna system of the ground station receiving weather information from the NOAA spacecraft on Arduino. The project must be modeled at https://projecthub.arduino.cc. Need your idea and help how to implement it.
...on a Raspberry Pi. The outcome should be displayed on an LED. The following are the key requirements for this project: - **LED Display Design:** I don't have a specific design in mind for the LED display, so I'm open to creative suggestions. It would be great if the design can enhance the user experience and make the game more engaging. - **Programming Language:** I'd prefer the game to be developed using Python. Please ensure you're proficient with Python and can create a smooth and efficient game. - **Control Mechanism:** I'll need the game to be controlled via a web interface that's accessible through a network. This is essential for user interaction and convenience. Ideal skills and experience for this project include: - Proficiency in P...
I'm looking for an engineer who can help me write some code for an Arduino to help me with a hardware project to read accelerometer data / gyroscope data. I have a piece of construction equipment that is supposed to vibrate up and down, however, if a customer assembles some attachments to it incorrectly it will vibrate up and down and side to side which will damage the equipment. I want to be able to read the accelerometer data to determine my customer has placed the attachment correctly and if it's incorrect I want to display a message on an LCD screen saying "incorrect placement" or something to that regard. I need help getting the hardware to work, creating the code for the hardware as Phase 1. Phase 2 is to allow this hardware to ...
...you were to pass the second logic test, and $50 (Fifty Dollars) if you were to pass the third logic test. ✻ OBTAINING SUPPLIES ✻ I will send you approximately $50 (Fifty Dollars) so that you can purchase ESP32 development boards, breadboards, components (such as resistors, transistors, and capacitors), wires, etc. on a site such as AliExpress, Mercado Libre, etc. The ESP32 is similar to an Arduino. I realize it may take you up to 30 (thirty) days to obtain these items. That's fine with me. However, I will * not * help you deal with corrupt local customs officials who require bribes to release goods. Any “horror stories” you might have heard or read about corrupt local customs officials in your country requiring bribes to release goods probably were for item...
...see that the section to monitor for changes is the one highlighted in blue. What I need to know is which HTML code should be copied from the website in order to monitor it and add it to a new flow. (attached the example) Provide a list of required dependencies and instructions for setting up and configuring the flow, including Telegram bot integration, so I can install/configure them on my Raspberry Pi. Important: MAX BUDGET 45€ - No Dummy Offers . Please don't send me dummy offers just to make the initial Contact and then ask for more money....
I am planning to use 1.69" LCD Display Module (240x280) with raspberry pi 5 to draw animated eye … I am looking for a developer to help me in 1- setting up the screen to work with raspberry pi 5 like this :RPI_for_1.69_lcd_module 2- setting python on my raspberry 3 - write a python code to draw animate eye like this I will give remote access to my raspberry pi 5 and the developer should install everything live to my items.
...system for a fitness rig that involves real-time human movement tracking. The system should be a combination of microcontrollers and computer vision technology, specifically using Arduino boards and Raspberry Pi. Key Requirements: - Real-time Movement Tracking: The primary functionality of the system is to track human movement accurately and in real-time. This involves capturing and processing data on various physical activities. - Minimalistic and Functional Design: I envision a setup that is small, lightweight and unobtrusive. Skills and Experience Needed: - Proficiency with Arduino boards and Raspberry Pi is a must. - Experience with computer vision, machine learning and human movement tracking is highly desirable. - Unde...
I'm looking for a talented Kivy designer to help me bring my application to life on a Raspberry Pi. Key requirements: - Designing user interfaces: My ideas are solid but I need someone who can make them a reality on screen. - Creating interactive buttons and widgets: The application needs to be intuitive and user-friendly. - Integrating code with the UI: The successful applicant will be able to help me to integrate the back-end code with the user interface. Ideal skills and experience: - Proficient in Kivy: As a Kivy designer, you should have experience in developing applications on this platform. - User interface design: You should have a strong portfolio of previous user interface designs that you can draw upon. - Attention to detail: A keen eye for detail is essent...
...see that the section to monitor for changes is the one highlighted in blue. What I need to know is which HTML code should be copied from the website in order to monitor it and add it to a new flow. (attached the example) Provide a list of required dependencies and instructions for setting up and configuring the flow, including Telegram bot integration, so I can install/configure them on my Raspberry Pi. Important: MAX BUDGET 45€ - No Dummy Offers . Please don't send me dummy offers just to make the initial Contact and then ask for more money....
...issue with incorrect message structures within my C# windows service application. - Problem: At present, our application is producing improperly structured messages - an anomaly that we are keen on rectifying. - Solution: I am in search of a proficient C# developer with significant experience in handling message logging, particularly with event loggers. You will be required to add the event logger and figure out what is causing our issues. - Timeline: The task is quite urgent, so I need someone who can begin immediately and deliver as soon as possible – I'm counting on your efficiency. Skills and experience: - Advanced knowledge of C#, especially in creating and troubleshooting windows service applications - Experience with event loggers, from implementation to d...
...on a Raspberry Pi. The outcome should be displayed on an LED. The following are the key requirements for this project: - **LED Display Design:** I don't have a specific design in mind for the LED display, so I'm open to creative suggestions. It would be great if the design can enhance the user experience and make the game more engaging. - **Programming Language:** I'd prefer the game to be developed using Python. Please ensure you're proficient with Python and can create a smooth and efficient game. - **Control Mechanism:** I'll need the game to be controlled via a web interface that's accessible through a network. This is essential for user interaction and convenience. Ideal skills and experience for this project include: - Proficiency in P...
it should have a file with , , , etc.
I need assistance programming an Arduino Opta PLC for remote monitoring. - The device must: - Monitor all 8 voltage inputs. - Provide access to monitored data through a web interface. Including Bluetooth capabilities and Wifi. Needs to send emails to customers or notifications to my apps. Ideal Skills: - Proficient in Arduino programming - Experience with PLC programming - Knowledge about remote monitoring and control systems.
...need to replace the Medispo logo by our logo which you can find it in the second file (Lujain marketing) , you may revise some colors to keep matching with our identity logo. - we need to change Models number on the items artworks to be as below : CAT# AS BELOW: A) POLYISOPEREN LATEX FREE SURGICAL GLOVES 1-Dr. LUJAIN POLYISOPERENE SURGICAL STERILE POWDER FREE GLOVES ( LSG-PI-5.5 ——————9.0) 2-Dr. LUJAIN POLYISOPERENE UNDERGLOVING SURGICAL STERILE POWDER FREE GLOVES ( LSG-UG-5.5 ——————9.0) 3-Dr. LUJAIN POLYISOPERENE DOUBLE GLOVING SURGICAL STERILE POWDER FREE GLOVES ( LSG-SD-55——————85) 4-Dr. LUJAIN POLYISOPERENE SENSETIVE SURGICAL STERILE POWDER FREE GLOVES ( LSG-SG-5....
...system for a fitness rig that involves real-time human movement tracking. The system should be a combination of microcontrollers and computer vision technology, specifically using Arduino boards and Raspberry Pi. Key Requirements: - Real-time Movement Tracking: The primary functionality of the system is to track human movement accurately and in real-time. This involves capturing and processing data on various physical activities. - Minimalistic and Functional Design: I envision a setup that is small, lightweight and unobtrusive. Skills and Experience Needed: - Proficiency with Arduino boards and Raspberry Pi is a must. - Experience with computer vision, machine learning and human movement tracking is highly desirable. - Unde...
...a UI designer to create a modern and sleek user interface for an ESP32/Arduino and a sensor based project. The design should feature gauges and other components in various colours completing a modern and clean aesthetic design. The UI should include the following components: - Sensor Readings: The main screen should present readings from various sensors in a clear and easy-to-understand format. - Real-time Graphs: The design should incorporate real-time graphs that display data trends in an engaging and user-friendly manner. - Control Buttons: The UI must also include control buttons for user interaction. Ideal candidates should have: - Proven experience in UI design for IoT projects, particularly for ESP32/Arduino. - Proficiency in creating sleek, modern, an...
...This app will aim to be hosted on the Pi Network Blockchain and must be functional and flow as they will Do manual checks and demo the app in the process of checking functionality Key Project Highlights: - This dapp will come with a few specific functionalities such as user registration and login, payment processing and also payment privacy capability - the user wallet within the dapp must have the capacity to hide the original sender's wallet and send from the dapps user wallet for anonymity - It will need to be able to include text/image features. - Despite the checkboxes above, I am undecided whether a content management system is needed, so your advice on this would be invaluable. Desired Experience and Skills: - Exposure to and understanding of the Pi Network...
I'm looking for an Arduino expert to setup an Opta PLC that can effectively monitor temperature readings. The system should be able to: - Receive inputs from different temperature sensors and digital inputs. - Monitor a vast range of temperatures from below freezing to above 90°F. - Send email notifications of temperature readings and changes every hour for remote monitoring. The perfect freelancer for this project is experienced in programming Arduino Opta PLCs, utilizing sensors, particularly those for temperature, and setting up efficient email notification systems. Beside technical proficiency, good understanding of thermodynamics would be a plus, but is not a requirement. The end-goal is an efficient and reliable remote temperature monitoring system.
Task description I am in need of a competent freelancer with proficiency in arduino, particularly for STM32 microcontrollers (specifically the NUCLEO-G491RE model) and ESP32 microcontrollers (specifically the ESP32-DEVKITC-32UE). It needs a certain amount of inputs and outputs to begin with, but also minimum 2 outputs with PWM-control or analog 0-5V, as the motorcontroller of choice works with PWM or 0-5V inputs. Also 2 analog inputs 0-5V for 2 kinds of safety edges. Find also the list of peripherals in the attachment. The pulse generated by the motorcontroller won’t exceed 500 Hz with our current motor/motorcontroller configuration. (see peripheral list: section motorcontroller) In total we need to have: Digital inputs: 12 Digital fast inputs (counter): 2 Analog inputs: 2 Di...
I'm in need of an Arduino expert who is adept at programming a small Arduino circuit to control LEDs, a motor, and sound. It will be integrated into a small, Matchbox/Hot Wheels-sized fire truck. The LEDS will flash alternately to represent the emergency lights. The motor will power the back wheels and the sound will play through a small speaker as a siren and horn. Here are the requirements for the project: I believe the Arduino MKR Zero would be a good fit since it has the integrated micro SD card holder and sound processing capabilities. It also has an integrated battery charger. The Arduino needs to be powered by a rechargeable Lithium Polymer battery like 3.7 Volts. - Control LEDs: I believe I can get by with two white 3mm LEDs. I will install fibr...
