Huawei usb asterisk jobs
...add/remove elements, also ‘open source’. Most of the requirements can be found in any CM4 carrier board available with a public license, for exampe CMIO from raspberry pi. Description of the elements, interfaces and other requirements follows • Maximum board size 100mmx200mm aprox. • Power souce 12v, protected and converted to other DC (present in CMIO) • USB-C with mini USB conector for programming (present in CMIO) • USB 3.0 (present in CMIO) • Ethernet (present in CMIO) • CANBUS • PCIe (present in CMIO) • SD card slot (present in CMIO) • HDMI to LVDS signal + backlight • AIS class B • Other UART inputs with optocouplers (to be decided) • ...
I need a talented developer to create a game app similar to Codenames It should be accessible via iOS, Android, Huawei, and Desktop platforms. The key feature is the support for online multi-player functionality, making the gaming experience interactive and competitive. The design must be professional. Please have experience in: - Multi-platform app development. - Online multi-player functionality. - Creating professional designs. The application must be used Reactjs Nodejs (expressjs) mongodb Additional chat features with text and voice for each room. Project duration is 50 days . Your bid should include your strategy for implementing these requirements.
I need an experienced professional to help fix an urgent problem in my Asterisk system that utilizes both Session Initiation Protocol (SIP) and Real-time Transport Protocol (RTP). My issue revolves around tenant to tenant recording or IVR. Specifically, all audio plays for only 2 seconds before abruptly ending calls. - Skills and Experience You should have extensive experience with Asterisk, SIP, and RTP. A deep understanding of their inner workings and potential pitfalls is necessary to effectively troubleshoot and resolve the current issue. A track record for quick and efficient problem solving is essential. Deliverables: - Diagnose the issue causing the audio and calls to end after 2 seconds - Implement a reliable solution to fix the issue Note that this project deman...
I am looking for a skilled Python developer who specializes in VoIP and PJSIP development. The successful candidate would ideally have experience creating SIP trunking solutions focused on handling incoming and outgoing calls with a Python bot. Key Features: - Set up S...Dialing(DID) support for calls between multiple company sites. - Configure the Python bot to manage incoming and outgoing calls. Bot Functionality: - Answer and route incoming calls to appropriate destinations. - Initiate outgoing calls based on specific triggers or events. - Handle real-time call transfers and call forwarding. Skills Required: - Proficient in VoIP and PJSIP development using Asterisk. - Strong Python programming skills. - Experience with SIP trunking and DID. - Familiarity with analog to VoIP co...
I am looking for a freelancer to creating a custom carrier board that is specifically designed for Raspberry Pi Compute Module 4. Features: - It should include an Ethernet - Type-C USB port power power. - We're also looking at equipping it with a 4G mobile module (SIM7600 or equivalent that work in Australia/Telstra). - 1 X Sim slot. - 2 X External antenna connectors SMA - 1 X Power LED for CM4 - 1 X Activity LED for CM4 - 1 X Multicolour LED for signal strength of mobile module. - The carrier board should be made as small as possible. Skills and experience: - Freelancers interested need proficiency in electronics and PCB design, along with a deep understanding of Raspberry Pi Compute Module 4. Experience in custom carrier board design and SIM7600 or equival...
I am looking for a skilled Python developer who specializes in VoIP and PJSIP development. The successful candidate would ideally have experience creating SIP trunking solutions focused on handling incoming and outgoing calls with a Python bot. Key Features: - Set up S...Dialing(DID) support for calls between multiple company sites. - Configure the Python bot to manage incoming and outgoing calls. Bot Functionality: - Answer and route incoming calls to appropriate destinations. - Initiate outgoing calls based on specific triggers or events. - Handle real-time call transfers and call forwarding. Skills Required: - Proficient in VoIP and PJSIP development using Asterisk. - Strong Python programming skills. - Experience with SIP trunking and DID. - Familiarity with analog to VoIP co...
Hello, i need someone good programmer who is able to modify ASF CDC echo example for atsamd11d14 mcu. When receive '1' by CDC -> set 2 pins of mcu When receive '0' by CDC -> reset these 2 pins of mcu And i would like device to be visible in Device Manager or Linux like 'USB CDC'
...Part A has a single function that function is to transmit a signal. The part needs to be housed in a waterproof container and be powered by a rechargeable battery preferably through USB. This part will actually go on a dogs collar. The device can either transmit vi. RF, USB or any other short range signal. Part B: Part B its job is to have two functions. The first function is to receive a signal from Part A, the second job of Part B is to transmit a specified RF signal to Part C when Part A is within 2 to 3 feet of Part B. Part B, needs to also be housed in a waterproof container and be able to be charged via USB. Part C: Part C, is a separate module that is already created its job is when it receives a specified RF signal from Part B it activates its predesigned ...
Seeking an experienced Asterisk developer to optimize the call quality of our existing VoIP system within our business operations. The ideal candidate must: - Possess 3+ years of experience in the domain - Be proficient with programming languages, VoIP, Asterisk interfaces (ARI, AMI, AGI), SIP configuration, API integration, and webhooks - Have robust problem-solving skills to provide innovative solutions Key responsibilities will include scrutinizing our present setup, identifying weaknesses, and implementing improvements to enhance call quality. A solid understanding of business requirements is vital to ensure the VoIP system is modified to suit our operational needs. Interested candidates, please email your resumes and cover letters.
...MCUs firmware and software development. Our ideal candidate would primarily help us develop a Windows, Linux, and macOS compatible monitoring system, specifically for voltage. The goal is to create a GUI application with specific features. These include: - Real-time monitoring - Graphical representation - Data logging - GPIO MCU ON/OFF control - Voltage and current real-time transfer to PC via USB-connected MCU SAMD21 This calls for not only proficiency in GUI application development, but also a demonstrated understanding of working with real-time data transfer systems. Real-time voltage monitoring and the know-how of system-level development will be crucial to this particular project. If you've delivered similar projects in the past or think you are well-aligned with ...
C++ expert. I have basic code. Want to stream the data from usb camera and show camera image. And some task with opencv.
Please create an ACE Sr one-seat configuration with no arms x7. Red part is battery power - blue part is Pip USB - Please create this configuration in three colours: Olympic Cobalt Cayman Please let me know if you have any questions! Thanks!
Hello, There is a system called galvonometer in laser cutting machines. An electronic card called ezcad2 is used to control the galvonometer system. Our aim is to send the image we obtained with Python OpenCV to the ezcad2 card and process it on the laser. We don't need the opencv part. Send any matrix to the card via USB and have it processed. I'm seeking a developer with proficiency in Python and experience in creating control software to develop a system that fulfills multiple requirements. Key Features: - Real-time Control: The software should be capable of controlling the laser marking system efficiently and in real time. - EZCAD2 Compatibility: The system should be seamlessly compatible with the EZCAD2 software to allow smooth operations. Interface: - Both Co...
Develop an app which resides and runs of a usb thumb drive. The app needs to launch automatically when the usb is inserted into the Windows computer. App should give a selection of Backup or Restore to the user. If backup is selected, the user is able to select as many folders they need to backup and click ok. The app can show a file/folder tree with checkbox options so that the user can unselect certain sub-folders within the main folder. The user should be given options such as copy without ACLs (file & folder permission settings (similar to Robocopy /B option). The app then checks the total size of all folders selected and checks if the free space available in the thumb drive is sufficient, if sufficient, it proceeds to zip and transfer each folder into the th...
I need a Python program developed that can establish and manage a connection with a National Instruments (NI) DAQ USB-6008 for the following tasks: - Analog Input: I need to feed real-time analog data into the program. This part of the program will be responsible for reading the analog input from the DAQ. - Analog Output: The program should also have the capability to send analog signals to external devices. This will be used to control physical devices. - Digital Input/Output: I will also need the program to manage digital signals. This will include reading digital inputs and sending digital outputs. - Want to connect 8 piezoelectric sensors to the DAQ and monitor all the signals in real-time on a PC. The program will need to manage all these tasks in real-time. Therefore, the ...
...innovative designer to create a compelling print ad with the goal of increasing brand awareness. The target demographic for this ad is young adults aged between 18-34. The business is Krave Kava Bar. Easily found on Instagram or a quick google search. Krave is a remote working location as well as social club that features non alcoholic drinks. Exotic Teas. For remote working we have plenty of plugs and usb ports, free wifi and plenty of seating. For Exotic Teas, we feature Key Scoop: - The ad will be used in print media, requiring the designer to have experience and a proven portfolio with such platforms. - The essential objective is to enhance brand visibility and recognition among young adults. -I have attached an example of the type of ads we have run in the past. Specif...
I'm seeking an experienced programmer to develop a high-end cyber simulation for educational purposes. The simulator is intended to deliver training on malware analysis, computer systems and SCADA. Goal: Explain how the USB and external hard drive are risky to the operating environment. Awork explanation: Provide an operating system and install a program to simulate the SCADA system interface to show how operations work. I will use an external hard drive on the computer, and the process will stop and send a red warning as a result the operations will stop. Deliverables: OVA image "Vmware" File to be installed on an external device Ideal Skills and Experience: - Proven experience in developing interactive simulations - Familiarity with cybersecur...
An Android app for QR code reading with TTS capability. (Reading of QR code And then speaking it on the phone) TTS Synthesis in Czech language preffered. Minimalistic design USB-Upload only. No Play store. Please see uploaded video. Due time, deadline: 96 hours.
I'm looking for a qualified developer who can feed my Android smartphone's native camera with content (images or videos) from the studio (OBS or Splitcam). The solution has to be with one of the protocols such as RTMP, WHIP or transmission via USB cable (which avoids possible lags). - AN EXAMPLE IS ATTACHED. Content type: - The project involves feeding images or videos into the camera, as detailed above. Ideal skills and experience for the job: - Proficiency in OBS Studio and camera configuration. - Strong knowledge of image formats and how to feed them into the camera. - Experience in live streaming and understanding the requirements for a smooth streaming experience. Contract Conditions: - The developed app should be able to stream content from Obs Studio/Splitcam t...
Develop a sophisticated gaming peripheral that utilizes USB read/write capabilities to interact with computer hardware directly for data extraction and manipulation. This role requires advanced knowledge in electronics and programming, particularly in hardware-level interactions and protocol management - Design and develop a USB-based hardware device capable of dumping registers and extracting data from computer systems. - Work closely with software engineers to integrate hardware with application-specific needs, ensuring seamless data handling and manipulation. - Conduct extensive testing to ensure device functionality and compliance with technical specifications. - Analyze potential risks in hardware design and propose robust security measures to prevent detection and banni...
...installation of a driver for my TP-Link USB Archer T600U Nano adapter. Despite following the standard installation procedures and attempting various troubleshooting steps, I continue to face an error that prevents the driver from being installed correctly on my Windows Details:The device repeatedly shows Error Code 56 in the Device Manager after attempting to install the at updating and reinstalling the driver manually have been network troubleshooting steps have been taken without Wi-Fi option is not visible in my network settings, indicating that the adapter is not being recognized correctly by the Goals:Diagnose and resolve the driver installation the TP-Link USB adapter is recognized by the system and
Busco actualizar la tablet a una versión reciente de android que permita usar Google play
The problem: The solonoid valve does not turn off. The voltage on mosfet module output goes from 4.2 V to 4.8 V when motion is detected. It does not goes to 0V and thereby closes the valve. What have i done wrong? I have a simple setup: - Pir sensor AM312 - Nodemcu /ESP (powered by usb) - Mosfet module IRF520 - Solonoid valve 4.5V - External power supply connected to Mosfet 5V, 1A I'm using the following code: const int pirPin = D5; // PIR sensor pin const int mosfetPin = D6; // Connect to the IN/Input terminal on the MOSFET module void setup() { (115200); pinMode(pirPin, INPUT); pinMode(mosfetPin, OUTPUT); ("PIR Motion Sensor with Solenoid Valve Control"); } void loop() { int motionDetected = digitalRead(pirPin); if (motionDetected == HIGH)
...effectively. 2. External Modifications: * Add three strategically placed holes on the sides of the container to accommodate additional components or wiring needs. * Transform an existing USB-C port into an SD Card port, ensuring precise dimensions and fit. 3. Aesthetic Enhancements: * Refine the design by rounding the borders and corners of the container, aiming for a sleeker and more user-friendly finish. 1) Start with the initial model and DO NOT CHANGE the dimensions of the model, do not change the width and the screen opening, leave the model in the original dimensions. 2) Close the USB C port hole. 3) Create the 3 holes IN THE CORRECT POSITIONS, as indicated in the figure. They must be in the right positions. 4) Create the opening for the SD card, in the...
I am searching for an experienced programmer with skills in vb.net or LabVIEW, or Labwindows. Your task will comprise the development of a CanOpen protocol program making use of an IXXAT USB-CAN Converter. It run on windows 2000 operating system Key Responsibilities: - Develop a program using VB.Net/LabVIEW/Labwindows, capable of implementing the CanOpen protocol - Program must be able to read and write data to the IXXAT USB to CAN converter - The software should control devices using the CanOpen protocol Ideal Skills: - Proficiency in VB.Net, LabVIEW, and Labwindows - Advanced understanding of CanOpen protocol - Experience with IXXAT Converters It's essential that the chosen candidate guide me through the installation and testing process until we have a successful ...
...this project is to enhance the functionality and aesthetics of the current model. Scope of Work: 1. Internal Modifications: Integrate four stoppers/screw guides inside the container to secure the components effectively. 2. External Modifications: Add three strategically placed holes on the sides of the container to accommodate additional components or wiring needs. Transform an existing USB-C port into an SD Card port, ensuring precise dimensions and fit. 3. Aesthetic Enhancements: Refine the design by rounding the borders and corners of the container, aiming for a sleeker and more user-friendly finish. Existing Model: :4297704 Drawing of changes:
I am looking for an experienced Electronics Engineer, well-versed in using Altium Designer, for a series of projects that demand proficiency in a wide array of electronics, specifically focusing on Microcontroller integration, PCB layout and USB connectivity. Key Aspects: - PCB Layout design - Microcontroller implementation - USB Connectivity solutions Additional Requirements: - Expertise in Circuit design - Experience in selecting suitable electronic components - Signal analysis knowledge - Ability to conduct thorough testing procedures This project demands an adept understanding of electronic systems and circuitry meant for consumer electronics. Candidates with a solid track record in crafting and refining consumer electronic designs are strongly preferred. Your task ...
I'm seeking an experienced PCB designer to develop a custom ATSAMD21 Micro PCB board. - A USB interface, specifically pin header for most GPIO and USB D lines. - 10+ GPIO pins required for this project. The ideal candidate should have prior experience working with ATSAMD21 Micro PCB boards as well as an understanding of USB interface technology. Proficiency in board design and a keen eye for detail will be crucial for success in this job.
...professional to design a unique USB-C cable for my specific needs. Key Requirements: - Length: The cable should be about 5 inches long. - Connectors: The cable should have two male Type-C connectors. One must be 90-degrees to the cable connector and the other will need a 180-degree bend with a small radius of approximately 1 inch. - Color: The cable should be black. Purpose: The primary use of this cable will be for both data transfer and charging between USB 3.1 devices. I'm looking for someone to create the design, and help me to locate a source for the component, in the range of 100-200 units per order, and for each unit to be < $5.00 each. Ideal Skills: - Cable design and manufacturing - Proficiency in working with USB-C connectors - Understanding o...
I'm looking for someone to create two separate PCBs with USB-C connectors. The first board will consist of a USB-C female to USB-C male connector, while the second will have a USB-C female to USB-C female connector. Key Requirements: - Design of two separate PCBs with USB-C connectors - One PCB should have a USB-C female to USB-C male connector - The other PCB should have a USB-C female to USB-C female connector - The male connector needs to be mounted at 90 degrees to the board - One female connector needs to be mounted at 90 degrees to the board - Both boards should support data transfer and device charging - Both boards when oriented should connect to each other with the 90 degree connectors forming a Z shape. -...
I'm looking for an expert Electronic Engineer with abundant experience in Altium PCBA design. The task centers around the creation of a LM51772 Buck-Boost Controller design, adhering to specific requirements. - Output Voltage: Your design must accommodate an ...delivering high efficiency throughout the range. - Maximum Output Current: The design must support a maximum output current of 5A. - PD Type C Output Integration: Complete integration with PD Type C output is a necessity. Ideal candidates should have a sound understanding of power electronics and PCBA design, specifically with Altium. Experience with PD Type C output integration, and broader USB technology is also valuable. To succeed, a strong knowledge base around Buck-Boost Controllers, particularly the LM5...
...solution, I'm seeking guidance from a skilled freelancer experienced with both Raspberry Pi and Asterisk server setup. Key Project Details: - I do not require a full-fledged PBX setup, just a basic VoIP service facilitated through my Raspberry Pi. - The primary feature I'm interested in implementing is voice calling. Required Skills: - Proficiency in configuring an Asterisk server on Raspberry Pi. - Strong understanding of VoIP and related protocols. - Ability to guide and explain the setup process clearly. Your Role: I've tried to set it up but no voice can be heard on the other end. So this task is mainly a trouble shooting job. Your primary role will be to walk me through the setup of Asterisk on my Raspberry Pi, ensuring proper configuration f...
...nRF communication and embedded systems - Experience in developing programs for real-time audio transmission - Ability to ensure program functionality within a short-range wireless communication Your responsibilities will include: - Designing and implementing an efficient program that supports real-time audio communication -> (TX) nRF24L01+, (RX) nRX52840 -> nRF52840 should work as a USB audio device -> Sampling rate should be 48Khz 16bit - Testing the program thoroughly to ensure its reliability within a short-range wireless communication - Providing necessary documentation for program understanding and future maintenance Ideal candidates will have: - Proven experience in developing similar embedded programs - Strong familiarity with nRF communi...
I'm in need of a highly qualified and certified network and security engineer. Ideally, you should have certifications from Cisco, F5, Symantec, HP, HPE, Dell, Huawei, Avaya, Fortinet, and Juniper. Key Responsibilities and Tasks: - Network design and configuration - Firewall management - Network troubleshooting - Telecommunication system setup - Network security audits - Hardware installation and maintenance - System integration - Vendor selection and management - Providing ongoing support Your background should demonstrate extensive experience with all the above functions. I'm particularly interested in freelancers who have successfully handled similar tasks in the past. Your success will hinge on your ability to improve our overall network and security infrastructure. ...
I require an expert in Asterisk and FreeSWITCH development, along with experienced system engineering skills. Specifically, I need help with: - Asterisk and FreeSWITCH development - Integrating VoIP - Setting up Call routing and IVR (Interactive Voice Response) - CTI - Skill group base call routing to agents. Apart from these, the implementation of Asterisk and FreeSWITCH clustering as well as Call Center Reporting is required. The technology stack should be Linux, PHP, MySQL along with postgresql and API knowledge. The freelancer should have considerable experience in these to meet the project's specific requirements.
...persona con experiencia configurando la libreria de Javascript SIPML5 y asterisk. Tenemos todo instalado y configurado. El softphone web se registra al asterisk, emite y recibe llamadas, pero cuando se atiende la llamada no transmite el audio. El servidor tiene instalado una VPN. Cuando el usuario se conecta a la VPN, entonces funciona el audio de la comunicación pero cuando no se conecta a la VPN entonces vuelve el problema del audio. Se requiere que el softphone funcione sin VPN, solo por internet. Version asterisk 18 OS: Ubuntu Server 14 +++++++++++ A person with experience configuring the SIPML5 and Asterisk Javascript library is required. We have everything installed and configured. The web softphone registers to Asterisk, sends and recei...
...cloud based and users to use there microsoft accounts to login with there smart card. - If the smartcard is removed from the card reader we want the users windows session to be locked until they re-insert the card/resume session. Ideal Skills and Experience: - Strong experience in setting up and managing Azure AD. - Expertise in configuring smart card login functionalities. - Familiarity with USB-Based Smart Card Readers. - Excellent problem-solving skills and attention to detail to ensure the system runs smoothly - MUST have experience with smart cards. Your bid should also indicate your knowledge of Azure AD, smart card login configurations, and your ability to ensure a streamlined and secure user authentication process. We would also like recommendations for budget fr...
...connections. 5. USB C Type Data + Power Connector (3 Male Connectors) & (3 Female Connectors): - Connect the USB Type-C connectors to the RK3588 SoC or an appropriate USB controller, ensuring proper signal routing for data and power delivery. - Implement circuitry to support dynamic switching between male and female connectors as required. 6. On-board Cooling Fan Pinout (3/5V): - Provide connections for the on-board cooling fan, including power and control signals. Ensure compatibility with both 3V and 5V fan types. 7. WiFi 5: - Integrate the WiFi module into the schematic, connecting it to the appropriate interfaces on the RK3588 SoC and providing necessary power and antenna connections. 8. Power Connection via USB Type-C and Portable Bat...
I need a US based ONLY skilled hobbyist to assemble and thoroughly test a USB or AC powered, waterproof, ultrasonic device with sensor, capable of sensing obstacles up to a distance of 2 or 3 meters. Adjustable distance is mandatory when object is closer than distance set, then alarm beeps a few times. Minimum distance for alerts 2 inches-can discuss. So if I set for let's say 2 inches and am (my car) closer than 2 inches, buzzer goes off. Only measuring if something is closer than limit set. The sensor should come with a buzzer/beep feature for alerting upon the detection of obstacles in this case my car pulling up too close to garage. **Bugs, weather, rain, changes in lighting should not set tge buzzer off. Should he a solid object that lingers for one second or so.. ...
I'm looking for a proficient and creative designer to help me design a tech-themed zip bag for a USB cable product. This bag should exude a sense of modern technological style while maintaining functionality. Requirements: - The design theme should be tech-oriented. It needs to have a modern, sleek, and minimalist look. - The zip bag is specifically for a USB cable product, so the design should reflect this in a subtle and tasteful manner. - My logo should be incorporated into the design. Ideal Skills & Experience: - Proven graphic design skills. - Previous experience designing product packaging, especially tech or cable products. - Knowledge about the latest trends in tech-themed designs. - A portfolio that showcases your ability to design with a distinct tech-or...
...developed for delivering OTP messages through a web interface. Short codes will need to be delivered through web panel to customers. Text message delivery for multiple services used in accounts creation like facebook, instagram, gmail, whatsapp and other services.. This means we will be using physical sim cards, NOT virtual numbers. Web backend will need to communicate with physical hardware: (Moden huawei e303, 3131 FOR EXAMPLE) The system has to be the same as sms-activate, sms hub, sms pva, please if you have this experience I am searching for coders experienced is USSD/AT commands. Heavy experience with GSM/CDMA cellular networks and sms gateway integration. Look at the websites I've posted above, put together a compatible hardware list for the web frontend&backen...
I'm looking for someone with experience in React, who also understands Asterisk servers and JSSIP. I have an existing asterisk server that I connect to with a React phone client to make outbound and inbound calls. Everything was working fine, but I recently refactored my code to use Redux instead of Context. In doing so, now when I make outbound calls I get this error. [ERROR] JSSIP UA not initialized And when making inbound calls it says the number is not available. I can provide the old, working version of the code, and the new version that doesn't work. I just need someone to look at it and tell me what I'm doing wrong after converting to Redux. If you can help, please include the word "briefcase" in your bid so I know you've read the descr...
I need urgent repair services for my Maxtor external hard drive. The drive is producing strange sounds when connected to my laptop, but I'm unable to access any... Key requirements: - Diagnosis: Perform a thorough diagnosis on the Maxtor external hard drive to identify the root cause of the issue. - Repair: Fix the problem with the drive to ensure it is functioning correctly. - Data Recovery: Retrieve all the documents, photos, videos, and Solidworks files from the drive. I've already tried connecting the drive to a different computer and changing the USB cable, but the problem persists. I'm looking for a professional who has experience with data recovery from Maxtor drives and can handle urgent situations. Your expertise is crucial as the files on this drive are e...
I need an expert to help with the setup of a Sonoff Zigbee 3.0 USB Dongle on a Synology NAS (DS920+). The device is not being recognized by the DSM 7.1 Linux-based operating system and does not show up in the /dev folder despite reinstalling the drivers. The chosen freelancer must be well-versed in Linux systems, troubleshooting device recognition issues, and experienced in the setup of Sonoff Zigbee dongles. Experience with automation using Home Assistant would also help. The task includes: - Analyzing the cause of the current recognition issue - Implementing a solution to get the Dongle recognized - Advising on further steps to avoid such issues - Ensuring the Dongle operates as expected - Ensuring Home Assistant running on Docker can see the Sonoff Zigbee dongle. For those in...
...your developed app directly with hardware (beacons, sirens, etc.) - are solution-oriented (we don't believe in "that's impossible") - don't mind working on your own without constant supervision - keep your word and communicate openly Advantages: - experience with image processing, neural networks, and IoT concepts - knowledge of the Arduino IDE - basic understanding of communication protocols (USB, Ethernet, etc.) - project management skills - experience leading a development project - communicative English - you are ready to start right away You'll get a chance to: - directly influence the final product with your knowledge and skills - experiment and implement your ideas - continuously learn hands-on - collaborate with professional and senior dev...
...samples, libraries and Arduino IDE for developing any code. I have developed several codes for different kind of boards. I can do simulation by using Proteus also. There are Arduino models and code can be debugged by ELF file. Simulation result is same with real time application. I prefer using ESP32 for Bluetooth or Wifi. It’s code will be developed by Arduino IDE. Programming of it will be made by USB-to-UART converter. Since I have developed several codes until now, it is easy to give good solution....
As a professional with experience in LabVIEW, I need your help to develop a FlexLogger Plugin for real-time monitoring. This assignment requires someone comfortable with: - Designing within LabVIEW environment, - Incorporating Data Acquisition, - Implementing Signal Processing, - Working with digital scale inputs through a USB connection. Operating on Windows, the final plugin must offer robust data analysis capabilities and support specific toolkit features. Prior experience in designing real-time monitoring applications will distinguish competitive proposals. Would like to work with someone in the Albany, NY and Troy, NY USA area
Looking for a seasoned professional to execute a thorough examination of my Windows 11 PC, focusing on its security aspects and looking for logs to find eventual data breaches through the PC's USB ports. You will be expected to access remotely and analyze my PC logs and provide a comprehensive report presenting: - Suspicion of data leak through the PC's USB ports or other - Detected vulnerabilities - Recommendations on how to reinforce the security stance - Authentic summary of your findings - Investigation of any data breaches Bids will be analysed according to your capabilities are your years of experience in the Windows 11 security audit field. This task requires meticulous attention to detail and an ability to deduce and extrapolate potential risks from exis...
I'm looking for a skilled developer to help me set up an RFID attendance tracking system using a Raspberry Pi and a USB RFID reader. The system should be able to read RFID tags and record the attendance data. Key requirements: - Develop a script that can integrate the USB RFID reader with the Raspberry Pi for attendance tracking - Store the attendance data on an external database - The external database should be an MS Access DB storeb on windows server on lan shared folder data stored to database should be : date/time, cardID (readed card ID), cardReaderID (could be mac address of network interface), cardReaderSN (also could be the mac address of network interace), cardReaderName) Ideal candidate should have: - Proficiency in Raspberry Pi and the ability to set up a...
