Building Engineering Jobs

Electrical Engineer Wanted for Construction Drawings We are seeking experienced Electrical Engineers to design and prepare construction-ready / Issued For Construction (IFC) drawings for a three-level commercial building with a single basement. This development has had 1st stage permit/ council approval and now requires detail input and IFC drawings. Approved drawings are available in CAD and Revit. Electrical Engineering Scope: • Design incoming supply – SLD (single line diagram), estimated load schedule and capacity • Tenant sub-metering and base-building metering strategy • Power for mechanical plant and fire services • Earthing, bonding systems and required power quality protection and monitoring, including solar energy monitoring. • Lighting design (i...

I need a Kawneer storefront system installed, including storefront framing and aluminum swing doors. Requirements: - Supply and install storefront framing and aluminum swing doors. - Must have experience with Kawneer systems. - Ensure proper fitting and durability. Ideal Skills and Experience: - Expertise in commercial door and storefront installation. - Familiarity with aluminum materials. - Strong attention to detail and craftsmanship.

I’m moving forward with the structural design of a new residential building and need a seasoned civil engineer to handle the full structural analysis. Your work will inform my architectural team and local permitting office, so clarity and code-compliance are critical. Scope • Analyse gravity and lateral loads for a standard two-storey residential structure. • Provide member sizing, load paths, and connection details in line with current local building codes. • Deliver calculation sheets (PDF) and editable structural drawings in AutoCAD or Revit, plus a concise summary report highlighting key assumptions and safety factors. What I’ll supply • Architectural floor plans in DWG/PDF. • Site information, soil report, and any existing surveys. Expecta...

I need a professional to help with a home extension and loft conversion. The primary focus is on extending the kitchen. Key Requirements: - Extend kitchen to add more space. - Consider using the extra space for dining, storage, or workspace. Ideal Skills and Experience: - Expertise in home extensions and loft conversions. - Strong understanding of kitchen design and space optimization. - Ability to manage project from concept to completion. - Excellent communication skills to keep me updated. Please provide a detailed plan and timeline.

I have commercial construction drawings for a project that were already signed and sealed from Jacobs Engineering. The permitting department for the city is subcontracted from Jacobs which creates a conflict of interest. I need an independent PE to sign and seal the drawings. The project is for a concrete pad and a metal canopy structure in a water treatment plant.

I am a structural engineer looking to partner with a PE for a project in Anchorage, AK. The scope of work is to check the roof framing to support new loads imposed from the removal and replacement of mechanical equipment. The project is located in Anchorage, AK.

I need a drawings for a 15x20 detached storage structure primarily for tools and equipment. The structure should include: - carriage doors Ideal Skills and Experience: - Experience in building detached structures - Knowledge of shelving installation - Ability to ensure durability and security for storage purposes Please provide examples of similar work done.

I need detailed design specifications for piers to support a barndominium. The design must be based on soil testing and comply with building standards. Key requirements include: - Size and dimensions - Material type - Load-bearing capacity The most critical aspect is load-bearing capacity. While I have some specifications, I'm open to recommendations. Ideal skills and experience: - Structural engineering - Knowledge of building codes and soil mechanics - Experience with residential foundation design

I need an engineer to provide stamped documents for a small event tent (18x24 feet). The scope includes: - Structural analysis - Wind load calculation Ideal Skills and Experience: - Licensed structural engineer in COLORADO - Experience with temporary structures - Knowledge of local building codes and regulations

Hi I will share the details with the shortlisted candidates. Thanks

I already have a complete 2-D CAD drawing and I’m ready to make a round of layout changes. You’ll receive the current file in DWG and PDF formats together with clear mark-up The assignment is straightforward: adjust the existing layout exactly to my notes, keep all dimensions consistent and clean, and send the updated plan back for review. I work iteratively, so I’ll return with any fine-tuning comments until the revised version matches the brief. Final hand-off is the edited DWG (or compatible CAD file) plus a print-ready PDF that clearly reflects every change. Fast turn-around and accuracy are the priorities here.

I'm seeking an architect to draw plans for a complete home renovation to submit to get permits. Key areas to renovate include: - Kitchen - Bathroom - Living room Ideal Skills and Experience: - Proven experience in design drawings in whole home renovations - Strong portfolio in modern design - Expertise in improving functionality in home layouts - Knowledge of energy-efficient materials and methods is a plus Please share your portfolio and past project references.

I need an architect to stamp my detailed design residential architectural plans. The plans require structural engineering and MEP approvals. Ideal skills and experience: - Licensed architect (Wisconsin) - Experience with residential projects - Familiarity with structural and MEP engineering standards

I need a signed as-built plumbing certificate for an existing residential duplex installation (3028 SW 21st Street / 2110 SW 30th Court, Miami FL) that must be accepted by the City of Miami Building Department under permit BD20013431001. I require a licensed Florida Professional Engineer or Architect who can: Review the full photographic and video documentation of the installed plumbing system I will provide, Confirm code compliance with the Florida Building Code Plumbing (6th Edition, 2017), and Issue a signed, sealed, code-compliant as-built certificate in PDF that the City of Miami Building Department will accept. The documentation package includes crawl space video footage, still photographs of all fixture connections above and below slab. A draft certificate is ready for your review...

I'm seeking a skilled professional to evaluate the structural integrity of a roof-mounted antenna on a flat concrete roof. This is on the 18th floor roof of a downtown building in Buffalo. We will attache 2 OTA and one Dish Network dish to existing pole mounts. Attached are samples of what we have installed elsewhere. The Dish is a standard residential unit, the antenna's vary in shape, but are aluminum, so weight doesn't vary much. Key Requirements: - Assess the stability and strength of the antenna installation - Identify any potential risks or needed repairs - Provide a detailed report with images and recommendations Ideal Skills and Experience: - Experience with structural assessments, especially on concrete roofs - Knowledge of antenna installations and potential...

I need a detail-oriented drafter to revise my existing working drawings (saved in AutoCAD) and supply clean PDFs of each level at 1:50. Here is what has to change: • Second floor: adjust the finished-floor-to-concrete-ceiling height to 293 cm everywhere. • Using the GRM reference file that I will send, place the section symbols A-A, B-B and C-C on both the ground and second-floor plans. • At the two front storage rooms beside the entrance, show a lowered ceiling for the first 50 cm with a dotted line (height 2.40 cm), then keep the remainder at 4.00 cm. Please keep the DWG filenames exactly as they are now, simply overwriting the originals, and add separate PDFs—one for the ground floor and one for the second floor—scaled correctly. All drafting must rema...

I need to underpin an existing solid brick foundation in my basement. The current ceiling height is less than 7 feet, and I want to raise it to a minimum of 8 feet. Requirements: - Underpinning of solid brick foundation with concrete - Increase ceiling height to at least 8 feet Ideal Skills and Experience: - Experience with underpinning and working with brick foundations - Knowledge of structural integrity and safety standards - Relevant masonry and concrete work skills Looking for a qualified professional to ensure a safe and effective height increase.

I'm looking for a skilled and experienced contractor to build an erosion control retaining wall using Allen's block. The wall will be over 2 meters in height. Key Requirements: - Use of Allen's block - Erosion control as primary purpose - Wall height over 2 meters Ideal Skills & Experience: - Experience with Allen's block construction - Expertise in building high retaining walls - Knowledge of erosion control techniques Please provide examples of similar work done.

I need a complete, permit-ready shear wall plan for a single-story, wood-framed house. The drawing set must illustrate both exterior and interior shear wall locations, label each wall clearly (SW1, SW2, SW3, …), and show a continuous load path that relies on Simpson Strong-Tie hardware. Here’s what I expect to see in the final package: • Full plan-view shear wall layout with tags that match the schedule • Hold-down callouts using the HDU series (or equivalent) at every required end • Anchor-bolt notes, spacing, and edge-distance details coordinated with the foundation plan • Blocking requirements between studs, at panel edges, and at plate lines • A nailing schedule for ½″ OSB Structural-1 called out in both plan and elevation v...

I already have the floor plan and elevations for a concrete monument sign; what is still missing are the structural drawings that will satisfy Australian certification requirements. The footing must be designed for H-class (highly reactive) soil, so I need calculations and details showing pier/slab dimensions, reinforcement schedules, and anchorage sized for local wind loading in accordance with AS 1170 and AS 3600. Time is critical—I’d like the signed package ready to lodge with council as soon as possible. Deliverables 1. Certified structural drawings (PDF + DWG) covering the complete sign frame and footing. 2. Footing detail and design calculations specifically addressing H-class soil conditions. 3. Compliance statement referencing the relevant Australian Standards...

I need a bridge designed primarily for pedestrian traffic. The expected foot traffic is low. The bridge will be over a season creek, and while my primary interest is a foot bridge, if the design requirements don't change too much I would like it to support a UTV to drive over it. This is on private property with minimal traffic. Requirements: - Type of bridge: To be determined - Designed for low traffic Ideal Skills and Experience: - Civil or structural engineering background - Experience in bridge design, especially for pedestrian use - Knowledge of safety and regulatory requirements for low-traffic pedestrian bridges - Ability to create detailed design plans and specifications Please provide any relevant past work and qualifications.

I have a set of “as-laid” drawings already created in AutoCAD, but the page setup still needs work. Your task is to open each file, set the layout for A1 landscape, and make sure every dimension line, legend and annotation prints crisp, full-size and fully visible. If a note, hatch or layer needs tweaking to achieve that clarity, go ahead and edit the drawing—accuracy matters more than locking the file down. Once everything is clean, I’ll need two deliverables for every sheet: the updated DWG and a ready-to-print PDF. Turnaround is ASAP, so I’m looking for someone who can jump straight in and outline a clear, step-by-step approach in a brief proposal.

Preciso que seja instalada uma lona plástica impermeável no vão deixado para o ar-condicionado da minha residência. O objetivo é vedar completamente a abertura, evitando infiltrações de chuva e entrada de poeira. Escopo do trabalho: • Medir o vão existente e cortar a lona no tamanho correto. • Fixar a lona de forma firme e estética, garantindo que fique bem tensionada e sem folgas. • Utilizar buchas, parafusos e perfis ou fitas adequadas para assegurar a vedação. • Verificar se há pontos de umidade ou reboco solto e, se necessário, fazer um preparo simples antes da fixação. Aceito sugestões de materiais ou técnicas que melhorem a durabilidade da ...