Embedded C programming LPC1768 -- 2

Hi Mr. Client, I have just gone through your project requirements. I think I am a fit candidate as I have industrial experience of 3+ years in NXP LPC Families, STM32, Arduino, Texas Instrument MSP families. As the controller you suggested in LPC1768 which is from NXP, I have worked over more than 1.5 years on that controller, and I know nook and corner of that controller. I have few questions which we can discuss on chat. Hoping to work in this project. Thank you, M. Sai Kalyan.

My name is Metin and I am excited to help you with your project. I have extensive experience in embedded C programming, specifically on the LPC1768 microcontroller. With my background in electronics, I am well-versed in the hardware requirements for this project. Additionally, I have skills in C++ programming and electrical engineering that would be valuable for developing your new product. I understand that you are looking for a short timeline (two weeks maximum) for this project with an appropriate cost for the timeframe needed. If this timeline is not doable I am open to extending it by a few more weeks - just let me know! I would be delighted to discuss further how my skillset would be best suited to meet your needs should you choose to hire me for this job. Please feel free to contact me if you have any further questions or would like more information about me or my services..

Hi There, I am a senior Expert and Have more than 5 years of experience in electronics and embedded design. Just check my profile and share your details. Time and Budget will be discussed. Thanks

I am a mechatronic engineer with more than 5 years experience in embedded systems programming and I believe I can handle your task to perfection

Hello I am a varified enginer ,prefared freelancer and I have more than 15years of experience in the embedded systems design, pcb design, electronics, and complete system design. I have good experience in lpc1768mcu ,so let's discuss your project in chat.

Dear Client.✋ I have just read your job description and your project is really interesting to me. The Items you raised are similar to what I have already done in practice and I think you can do it in a short time if you have a little explanation. I'm an expert having specialization in--- ✔️ Embedded system based on Microcontroller (ATMEGA, AVR, STM8, STM32, MSP430, TMS320, PIC ...) ✔️ Python with Deep Learning, Machine Learning ✔️ Python with Data Science ✔️ A system based on development boards(Arduino, Raspberry PI, Node MCU, Bluechip, Teensy,…) ✔️ Bluetooth, WIFI, zigbee, LoRA ✔️ PCB layout designing, providing GERBER and BOMs, 3D files using Altium, EAGLE, Kicad, EasyEDA… ✔️ Programming firmware of Microcontroller & C++ I think my many design and practical experiences can help you design your project and give you enough satisfaction. I look forward to your response. Best Regards.

Hello, I am Adnan and I am here to offer you my services for your Embedded C programming project. As an experienced and results-driven professional with a background in project management, strategic planning, marketing, and data analysis, I am ideally suited to help you meet your hardware requirements and timeline needs for this project. My expertise in C Programming and C++ Programming allows me to successfully lead teams through complex projects on time and within budget. My strong organizational skills and ability to communicate effectively with stakeholders have helped me navigate complex projects and ensure successful outcomes. My data analysis skills (including Excel proficiency) make me ideally suited to work with data on the project; my attention to detail ensures that all requirements are met at all stages of the process so that you get the highest quality product at an affordable rate. I would be thrilled to discuss further how my skillset could benefit you on this project - please feel free to reach out if there is any part of my profile that peaks your interest!

yeah i m well versed with the c and c++ so a si got your task ready to start work form now

Hello, Thank you for considering me for your LPC1768 microcontroller project. With your specific hardware requirements and the NXP LPC1768 MCU's capabilities in mind, I'm confident in my ability to deliver the results you're seeking within the desired timeframe. My experience with embedded C programming, coupled with my familiarity with the LPC1768 microcontroller's architecture, positions me well to develop your new product. I understand the importance of meeting your hardware specifications and delivering a high-performance solution. Key Points: Expertise in Embedded C: I possess a strong background in embedded C programming, ensuring efficient and optimized code for your project. In-Depth Knowledge of LPC1768: I'm well-versed in the LPC1768's features, including its ARM Cortex-M3 core, memory configuration, and various peripherals. Adherence to Timelines: I'm committed to delivering results within your preferred timeline, and I'm open to extending it if necessary to ensure a thorough and high-quality outcome. My proposal will factor in the appropriate timeline, hardware requirements, and cost considerations. I'm dedicated to providing you with a solution that meets your expectations and specifications. Please let me know the best way to proceed, and I'll be ready to start working on your project promptly. Thank you for your attention, and I look forward to the opportunity to collaborate with you. Best regards, Luis Enrique

Hello. I worked as an embedded Linux systems engineer. I worked the same with NXP products. But more on microprocessors than with microcontrollers. In particular with the IMX8MM-PICO-PI product from NXP. Optimized the Linux kernel, wrote drivers for audio and video codecs. And I worked with microcontrollers such as: esp 32, stm32, RP2040, etc. Please contact me for a more detailed discussion of the project.

I am an Electrical and Electronics Designs Engineer specializing and Accomplished in the area of Embedded Systems, Product Design & Prototyping, Schematics, and PCB layout. I will do basic to Advanced Circuit design using these Software: • EasyEDA • Autodesk EAGLE. • Fusion 360 • Multisim • Proteous • KiCad EDA • Altium • Allegro My PCB design covers the following areas • Single Sheet to Multi sheet Schematics • Single/double-sided and Multi-layer PCBs layouts • Power Supply (SMPS & LDOs) • CE, FCC, ANSI-C ... • EMC/EMI emission control techniques • IPC standards-based models • RF & High-speed layouts • Digital video, audio, and other multimedia interfaces: HDMI, MIPI DSI/CSI, I2S, TDM, etc • Typical data and control interfaces: UART, USB, SPI, I2C, SDIO, PCIe, etc. • Signal Integrity • ECAD Library Administration • CAN Protocols. I have experience of designing • High speed PCB boards • Single Board Computers • Power Circuits • RF based circuits • Amplifiers, MCU, MUX and many other interfaces

Hi there I m an Architect/Civil Engineer/BIM/CAD Expert and will offer you the Best Discount. You can pay me a reasonable price + Good Review only. I want to review your Embedded C programming LPC1768 -- 2 plans/sketches,/ideas and work with you. I know you have many proposals to look through, to make this quick. Please get in touch with me to discuss this project in more detail. My first priority is that my client will be satisfied with my work. I am an expert in these softwares, ✔ ArchiCAD ✔ Autodesk Revit ✔ Autodesk AutoCAD ✔. Autodesk 3ds max ✔ Sketch Up✔ Autodesk Navisworks Manage✔ Estimation ✔ HAPE ✔ ETAP✔ Tekla If you assign me your task, I will carry out your project with the best quality. Please come over chat and discuss your requirement in a detailed way. Thanks Fayyaz and Team

⭐️Hello, Hmood F.⭐️ I am pleased to submit my proposal in your project. I have read your description carefully. I am very interested in "Embedded C programming LPC1768 -- 2". I am confident that I have the necessary skills and experience to resolve your issue within the turnaround time you require. As a web & mobile expert with 6 years of experience, I have strong knowledge and rich experiences with Microcontroller, C++ Programming, C Programming, Electronics and Electrical Engineering and so on. Always, I understand the client's requirements clearly and provide optimized solutions and perfect results. If you want, I will provide you my previous works. I'd like to further discuss your project and how my skills align with your needs. I appreciate your consideration and look forward to the opportunity to contribute to your project. Thank you for your time and consideration. Best Regards, Danil.

Hi, Embedded C programming LPC1768 -- 2Hmood F.C Programming, Electronics, Microcontroller, Electrical Engineering, C++ ProgrammingC Programming, C++ ProgrammingJordan We are an expert team which have many years of experience on C Programming, Electronics, Microcontroller, Electrical Engineering, C++ Programming Please come over chat and discuss your requirement in a detailed way. Regards

❤️Hello Hmood F., I am excited to submit my proposal for "Embedded C programming LPC1768 -- 2" project. With my expertise in both front-end and back-end development, I am confident in delivering a seamless and efficient solution for your requirements. Why Choose Me: I am new to freelancer.com but I have worked via other job platform before. I am a seasoned full-stack developer with 8 years of experience in web development. Proficient in a wide range of technologies including HTML, CSS, JavaScript, React, Vue.js, Angular, Node.js, PHP, Laravel, WordPress, Magento, Shopify, Drupal, Wix, Flutter, React Native, Python, AI, NLP, ML, and more. My approach involves: Collaborating closely with you to understand your vision and requirements. Implementing a responsive and intuitive front-end design. Building a scalable and optimized back-end architecture. I have completed similar projects where I developed custom modules for seamless user experiences. Thank you for considering my proposal. I am excited about the opportunity to work together and bring your project to life. Best regards, Natallia

Hi, how are you? I read your project details and really interested in this project. I am full stack developer having a 5+ year experience doing similar jobs regarding to these skills Electronics, Electrical Engineering, C Programming, C++ Programming and Microcontroller. Please start the chat, I know exactly what u are looking I done similar many projects in past. I want to ask few questions, Please start the chat so we can have detailed discussion and finalize the timeline and budget. You can check my portfolio as well: https://www.freelancer.com/u/Sidrairfan078 Thanks! Sidra

Hello, I just read out your description and am interested in your project. am expert in C Programming and also done certain type of project. If you need quality work than feel free to contact me. Thanks