Eagle pcb design arm jobs

I am looking for a skilled PCB layout designer to create an electronic PCB design for me. The board size is large, more than 10 square inches, and I prefer to use Altium Designer software for the design. The delivery time is flexible, more than 2 weeks is fine. Ideal Skills and Experience: - Experience in PCB layout design - Proficient in Altium Designer software - Attention to detail and precision in design - Strong communication skills to ensure project requirements are met within the flexible timeline

I am looking for an experienced developer to create a Micropython program on a raspberry pi pico and associated PCB for reading a generic resistive shunt. The project will require the following skills and experience: - Proficiency in Micropython programming language - Experience in designing and developing PCBs for sensor applications - Knowledge of resistive shunt technology and measurement techniques The project will involve designing and building a PCB that can read shunt measurements in the range of 50A to 500A with a standard level of accuracy of ±1%. The shunt to be used will be resistive in nature. The developer should be able to recommend the appropriate components and technologies to achieve the desired level of accuracy and range. The program should be writ...

The purpose of the, is to test three different type of plugs using a Network tester.

Tattoo design - I want to take images of sculptures I see online and make them look like real people (skin tone, hair details, eyes, colored clothing, etc) - finished design will be sun/beams/clouds over St Michael and St Raphael - will cover shoulder and upper arm (possibly coming down past elbow). Attached are inspirations.

I am in need of a skilled freelancer to create a 3-axis swivel arm for an industrial/manufacturing use. The ideal material for this project is aluminum. Although I do not have exact dimensions, I have general requirements that the freelancer must be able to work with to create a functional and reliable swivel arm. The ideal freelancer will have experience in creating similar projects and must have knowledge of the necessary materials and tools needed for the job. Objective A 3-axis swivel arm that facilitates angle adjustment for a C-shape device at around 10kg. One end of the arm would connect to the back of the device. The other end of the arm would connect to a cart. The arm should have the following features: 1. Rotation should provide all pot...

Hello. I need a PCB designed / fully functional ultrasonic device to measure the quantity of a liquid in a tank. The total tank size can be any size up to 100 liters. The device will need to calculate the total amount of liquid in the tank and give output in liters, upto 1 decimal place (example, 10.2 liters, 5.7 liters, 1 liter, etc). The output needs to be sent via BLE to a customized destination that can be configured. Below are list of items that should be configurable - BLE passkey - Device name / identifier - Remote destination - Frequency of measuring the liquid level and sending to remote destination The device design / form-factor should ideally be between 5 - 8 cms diameter. It should also have provision for hook / case / frame so it can be attached either abov...

Looking for an experienced Embedded Software Developer to create software for an embedded system. The ideal candidate should have a strong understanding of C++ programming language on ARM cores. Skills and Experience: - Strong experience in Embedded Systems development - Proficient in embedded C/C++ programming language - Experience with building Arduino bootloaders and sketches - Knowledge with JTAG/SWD and other embedded debugging tools - Experience in NXP IMXRT1062 ARM core and other SoC - Familiarity with ARM-based systems, compilers, toolchains, and debugging - Experience with Qualcomm chipset is a plus - Experience with embedded Linux is a plus

Do you know why am measuring resistance ACROSS differential pairs? (eg. between pins 2 and 6) Help debugging a PCB with ethernet port (support over chat)

Hi Maryam A., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

Changes described in the attached file

Firmware and functioning with sensors and a microcontroller on a prototype pcb

I am looking for a PCB design for my embedded project. The PCB size required is medium (2-4 inches) and the design complexity is simple, with only a few components. While I do not have a specific list of components that must be included, I do have some preferences that I would like taken into consideration. Ideal candidates for this project will have experience in PCB design that included DC Planetary geared motors and be able to work efficiently and effectively to create a high-quality design. Attaching a sample image of the PCB similar to which is needed.

Need two black and white logos for custom aprons I'm making. The logos will have the same words, however, the image in the middle of the logo will be slightly different. As seen in my very rough example, the image in the middle is a large muscular flexing arm. One will be a "left arm" the other will be a "right arm". The left arm logo will need to be holding a BBQ Steak Knife in its fist. similar to the attached example. The right arm will be holdings a BBQ spatula in its fist. Both the steak fork and spatula should be held at a 40 to 60 degree angle. I have not decided if i want the text to be rounded around the image, or be straight as shown in the example. Additionally i have not decided on the font yet, however I'd like s...

I'm looking for someone with the following experience to help with an ongoing project ...service-oriented architecture. Designing and developing API CRUD operations that connect to NoSQL databases such as Azure Cosmos DB and MongoDB. Designing and configuring Azure Application Gateway to route traffic from both on-premises and public sources. Provisioning Azure resources such as Azure APIM, Function App, Logic App, Service Bus, Event Hub, Event Grid, Storage Account, and Key Vault using ARM templates and PowerShell scripts. If you have experience in these areas and can assist with ongoing project work and provide guidance, please reach out. Please note that I will disregard any quotes or information on your profile if your experience or reviews do not align with the requiremen...

I am seeking a PCB Designer/Electrical Engineer to consult with me on the circuit design for a multilayer PCB. The desired size of the PCB has not been specified, but it will likely be medium to large. The ideal candidate should have experience in multilayer PCB design and be able to provide consultation on circuit design. Additionally, knowledge of single-sided and double-sided PCB technology is preferred. The project consists of designing a pcb board which contains proximity sensor and count display. in the code we trigger the IR emitter and look at the status of IR receiver. each pcb has a slave PIC microcontroller. all the slaves are controlled via I2C bus by a master. the master receives data from each slave abou...

I need someone to redraw a simple schematic (65 components) from a pdf file to a project in Altium and then recreate .The project will last for a period of one to three months, depending on the complexity of the redesign. The ideal candidate will possess a solid understanding of PCB design and electrical engineering, and have experience with software such as Eagle and Altium Designer.

It's my husband and I's maternity announcement pictures and I would like to have the tattoos on my arm taken out.

Possession of STM development Board with Cloud Ethernet connectivity is a Must Extensive Knowledge of all STM development to...not looking to reinvent the wheel, what we need is someone that has past experience with simple ON/OFF industrial control cloud based remote signaling experience and data acquisition Seeking an electronic engineer to design and develop a new microcontroller product that will signal particular commands. The ideal candidate will have experience in consumer electronics and microcontroller development. The project will require troubleshooting and fixing issues as well as improving the product as needed. Key skills for the job include knowledge of microcontroller design and development, consumer electronics, and troubleshooting. More details pr...

I am looking for a freelancer to design and develop - Enhance / modify current design of our Raspberry Pi I/O Extender board. -- Adding into it a 'daisy chain feature for the daughter boards(see below). - Design 'daughter' / 'child' boards which can be hooked up in a chain talking over I2C, SP2 etc Function: - Daisy Chain / Connect through RJ45 Cables / headers. (Data and low power) - Have a high power input / output for motor. (opto isloated) - Input pins, and output pins. - Dip switch block for 'position' in node chain / daisy chain. - OLED screen for displaying basic Info(2.42 inch) - Control string of WS2812 LED's OLED screen will simply displays 0-999. and basic connection / startup / config options. The idea is relat...

I need someone to redraw a simple schematic (65 components) from a pdf file to a project in Altium and then recreate the PCB mosaic. All components are THT. I make full documentation available to the person who will undertake the task.

Electrical/Electronic engineer consultant for portable spa project. To assist the company's PCB designer/builder in determining the necessity (including proper part selection and placement thereof) for utilizing low-voltage fuses (1000 V or less; AC and/or DC) on the PCBA in accordance with UL 248-1 standard for safety and the National Electric Code (NEC) NFPA 70. More details will be shared over a chat.

I want to create an logo similar to the Ralph Lauren logo however with two horses with traditional Sikh design and there style is shown in the pictures with the man standing on top holding one arm to a rope with the other in the air holding a spear. The man should be a Nihang Singh and should look like the man in the picture provided clothing wise I can explain in more detail to any designers

...communication from an STM32F4xx microcontroller using CAN1. The data transfer rate should be set to 125 kbps and I want to use interrupt based receiving. Filtering should be set to receive all packets and the IDE should be EXTENDED. I have been working on this for a bit and have what I think is most of the code but obviously I have missed something. I need to send two packets from my STM32F4xx based PCB with an MCP2551 transceiver to an EVR100-3500 PSU and then receive the responses which then will be mirrored out to UART3 (which I am sure is working) to view on a terminal screen. The first packet info to be sent is found in can.c under the function turnOnPSU(): SendID is: 13 07 C0 81 Data is: 02 00 00 00 00 00 00 55 Return ID should be: 12 07 C0 81 Return Data should be: 0...

Hi, as discussed, I will test the prototype on a breadboard and I will send you the PCB Gerber files + code + video of the working circuit on breadboard.

We need someone have an experience with PCB re-engineering and how to import an the image on Altium software to redraw the layout easily

looking to do a tattoo of a morning dove with a leafy vine with small flowers that would extend from the back of the shoulder blade, across the shoulder and down the top part of the arm to the elbow

FPGA routes data between image sensor, ARM, display controller and usb controller. Initially designed using Lattice ICE40, but moved to Xilinx S7. Need help getting prototype up.

I am looking for a freelancer to design and develop Raspberry Pi I/O extender modules, these boards are 'satellitye boards' or 'NODES' with the following requirements: Function: - Daisy Chain / Connect through RJ45 Cables / headers. (Data and low power) - Have a high power input / output for motor. - Increase the number of input/output pins - Input pins, and output pins. - Dip switch block for 'position' in node chain. The 'NODE' modules, will need to have a few 'input' pins and a few output pins (Opto isolated) for running a motor x 2. They also need to connect to a basic LED screen that simply displays 0-999. The idea is relatively simple. There is 8 stations where these boards sit at. 'Client Side' - A switch is trig...

I am looking for a part-time person who can assist me with ESP32 based embedded PCB design and firmware development. The ideal candidate should have a working knowledge of ESP32 and hardware and firmware design. The desired functionality of the PCB and firmware is to design an embedded system hardware and firmware. The specific features should include wireless connectivity, data logging capabilities, and real-time monitoring. The project timeline is ongoing work.

This project is for designing a new pcb in which the main purpose is filtering magnetic interference. Project Includes Schematic Design, PCB Design, BOM Validation, Gerber Production etc.

I am in need of a Photoshop expert to remove background people from my photos as well as cara for social media use. The ideal candidate should have experience with photo editing and be able to complete the project ASAP week. The only additional edit required is making my arm smaller. I will tell you which ones to make smaller. Please note that this project is for social media use only. I need help with about 6 photos.

I am in the process of creating a logo that combines the use of both a brand name and a symbol/icon. I do not have any color preferences for the logo, thus leaving the options wide open for design possibilities. See the following link for current branding / logo idea / design elements. Font style "Raleway" Brand Name: Eagle Eye by Telematics Solutions (making the Eagle Eye much larger than the TS name is preferred). This logo will be used for both website, marketing material and on-product purposes. See attached camera examples. Will require all design files to be sent to us upon design completion.

Need to make the picture (attached) to look like an outline and for the man on the horse to have a sword in his showing arm, instead of holding the horse. Black and white, no color, Kindda like the side image (attached). Thank you.

I am looking for someone to convert my existing schematic and manual throughole PCB design into an assembled PCB design with a BOM. The project involves creating a small and simple PCB design, and I have the schematic and manual throughole PCB design ready. I have no preference regarding the type of components used for the assembled PCB design as long as they are good quality. Ideal skills and experience for this project include: - Experience in PCB design - Familiarity with converting schematic and manual throughole PCB designs to assembled PCB designs - Understanding of BOM creation - Proficiency in using PCB design software - Attention to detail and accuracy

Hi I have an old Orcad PCB II dos file version, need to have it converted to Cadence Allegro or Autocad or other free viewer. so it can just be a straight conversion. I'm looking for support from a freelancer with experience in ORCAD, ALLEGRO Designer PCB. If you feel like this is a project you can help me with, I look forward to hearing from you soon. Thanks!

Hi I have an old Orcad PCB II dos file version, need to have it converted to Cadence Allegro or Autocad or other free viewer. I don't need any specific design elements or features preserved in the converted file, so it can just be a straight conversion. I'm looking for support from a freelancer with experience in ORCAD, ALLEGRO Designer PCB. If you feel like this is a project you can help me with, I look forward to hearing from you soon. Thanks!

Im am looking for a basic logo for a fishing company based out if a small coastal town. The colors I would like to see are black, white and earth tones please. The main fish would be a striped bass but that doesn’t necessarily need to be part of the logo but would be nice. The words that need to be included in logo are : (Eagle Hill Outfitters) (Ipswich MA). Would like it to be small enough for hats, shirts, stickers and other things. Thank you!

Tengo la idea de un diseño en base a relevadores y timer´s para un cortacorriente temporizado a 12 vcd y requiero hacerla en electrónica PCB Entradas: Alimentación +12 cvd y -12vcd Señal de encendido +12vcd Señal de Puerta (esta tiene poder cambiarse la polaridad de entrada con un selector entre positivo o negativo) Boton Pulsador que desactiva los conteos. Boton Pulsador de Reset General Entrada a comun N.O de un SSR (Aqui entrara la señal de la bomba de combustible) Salida del N.O. del SSR (Aqui saldra la señal de la bomba de combustible)

Cartoon: Mother Eagle encouraging her baby to fly from their nest, but the baby tells her "But Mom, if God intended me to fly he would have given me a propeller".

This is a small task for PCB modification from gerber and exporting new gerber files for sending it to the manufacturer.

I would like a tattoo for the upper arm. The art is two 4.5 inch eagle feathers, feathers pointing down towards "elbow". The feathers are wrapped and tied together at the quill with a leather string. On each leg of the loose string are three beads. One blue bead and the other five beads will be various shades of light red to pink. The feathers symbolize marriage and each bead represents a child. One boy and five girls. I would like the feathers to be slightly separated so that the beads can fall between the two feathers. One feather will cover the outer half of the bicep and the other feather will cover the outer half of the tricep. The Feather color with be brown and white (Golden Eagle Tail Feather). The Feather that goes along the tricep will have notch re...

Hi I'm looking for PCB designer who can design a single layer pcb design.

...PCBs could be 2 layered or more 1. ESC PCB : Study and Import the open source design on PCB designing software like Altium Check if the design could be improved for higher rating Check if the PCB could be driven by Rpi GPIOS and modify accordingly Check components availability and place orders Place order for PCB manufacturing 2. CAN, SMbus, ADC, IMU, GPS, 4G PCB : Individual modules and open source designs are available online. Study and Import the open source design on PCB designing software like Altium Combine individual designs/modules Check if the PCB could be driven by Rpi GPIOS and modify accordingly Check components availability and place orders Place order for PCB manufacturing 3. BMS ...

I am wanting to create a tattoo that symbolises the rain. I love the rainy weather and want a tattoo to symbolise that. I want a minimalist tattoo for either the tricep or front of the arm. Thanks. I am looking for a freelance tattoo designer to create a minimalist rain tattoo for me. The tattoo should be medium in size, between 2-4 inches, and placed on my arm. I would like the design to be in black and white. Ideal Skills and Experience: - Experienced in tattoo design - Skilled in minimalist design - Proficient in black and white design techniques - Ability to work with clients to create custom designs - Strong portfolio showcasing previous tattoo designs

I am in need of a Photoshop expert to remove background people from my photos for social media use. The ideal candidate should have experience with photo editing and be able to complete the project within 1 week. The only additional edit required is making my arm smaller. I will tell you which ones to make smaller. Please note that this project is for social media use only.

I am looking for someone to design and assemble 10 PCB prototypes that are small in size and simple in complexity. The deadline for the project is 3-4 weeks. Unfortunately, I do not have all the necessary components and documentation ready, so I will need help sourcing them. I've attached a schematic for a board which works for what I need yet is too expensive and too large. I need someone who can use this schematic as a ground floor and design a similar board with newer components and better technology in order to make as follows: -- Size: Smallest footprint possible. -- Cost: Expense to be as low as possible per unit. -- Quality: Need these to be high quality. -- Reliability: Must have quality components so board can be used indefinitely with ...

Hello, I need someone to create Azure Master linked template to create below resources 1. vNet and Subnets 2. VPN gateway 3. Express route gateway 4. Route tables

I am looking for an experienced PCB designer to create a mid-sized soundcard PCB (5 x 5 to 10 x 10 cm). My preferred components are listed, although ideas and solutions to make the project better are welcome. As far as audio quality goes, I am aiming for something suitable for music production and editing. Attention to detail is key, so please take the time to get everything just right!

I am looking for an experienced electronic engineer to help me with my project....looking for an experienced electronic engineer to help me with my project. The main objective is to create a PCB schematic and layout design. The size of the PCB will be determined by the expert based on the requirements of the project. I have a the design of the circuit design, but I need someone to help me refine it and create a detailed design. The PCB will include a microcontroller, and other components such as power supply, etc. The ideal candidate should have experience in PCB design and be able to provide a detailed schematic and layout. Knowledge of microcontrollers and circuit design is a must. The ability to troubleshoot and s...

I am looking for a PCB design expert to create a control system PCB of medium size, ranging from 2-5 inches. Although I don't have a specific layout or components in mind, I have a rough idea of what I want to achieve. The main purpose of the PCB is to serve as a control system. Ideal skills and experience for this project include expertise in PCB design and layout, knowledge of control systems, and proficiency in using design software such as Altium or Eagle. The project requires attention to detail, strong problem-solving skills, and the ability to work collaboratively with me to realize my vision.