Plc microcontroller jobs

I'm in need of an expert in digital electronics to assist in a project of mine. The specifics of the project, including whether it involves circuit design, PCB layout, or microcontroller programming, we can discuss in further detail. Key requirements: - Proficient with digital electronics and related technologies - Experience with either circuit design, PCB layout, or microcontroller programming - Ability to collaborate effectively and share project files as needed Your role will be instrumental in the success of this project, and I am looking for someone with a proven track record in this field. Let's connect and discuss the project further.

Adjust 5 - 12 v dc with digital potentiometer and RF module . Simple project . Microcontroller based

I'm seeking an intermediate-level programmer with experience in Embedded C and 8051 Microcontroller. The project involves designing a system that takes input from 3 sensors and controls an actuator (motor). Key Requirements: - Design a system on 8051 Microcontroller - Program the system in Embedded C - 3 sensor inputs and motor output - Intermediate experience level - Assist in sourcing necessary components I have a strong preference for someone who has worked with 8051 Microcontroller and has experience with designing systems that integrates sensor inputs and actuator outputs. Your role will involve both programming and assisting in recommending and sourcing the necessary sensors and actuator for this project. If you're experienced in these fields and c...

I am in need of an experienced electrical engineer to assist with spec'ing an electrical system. The system design. -I am needing to control a Nema17 stepper motor and 300watt BLDC Motor. -I already have the motors selected and the drivers for each motor. -I am wanting to use an arduino microcontroller for the controls. -I require the power supply to be as small as possible, but still being well within in a safe range of the power demand of the system. Refer to addition info regarding the sizing, or have a discussion with me on possibilities. -Additional peripheral components: 3 x Push Button, 1 x power switch, 1 x small display screen. 2 x Limit switches. What I need done. I need a freelancer to design and spec the unspecified components around the ones that are al...

I'm looking for an experienced firmware developer specializing in STM32 microcontrollers. I already have arduino Mega tested code which i need to convert into stm32 family Key Project Details: - Specific STM32 Model: The project will involve firmware development for a specific STM32 microcontroller model. - Application/Use Case: While not specified, the project likely involves a real-world application within the realm of consumer electronics, industrial automation, or wearable devices. Skills & Experience: - Prior experience with STM32 microcontrollers is essential. - Proficiency in utilizing various communication protocols (e.g. UART, SPI) and integrating sensors would be a plus. - Familiarity with power management techniques is highly desirable. - Experience with the ...

...connectivity to achieve optimal functionality. While not necessary I will favor developers who have the hardware at hand and can test themselves before finalizing the project. Any prior experience in Embedded development, File transfer, Network communication would be an added bonus. Key objectives are as follows: - Establish Websocket connection to public domain - With Wiznet W5500 and STM32 microcontroller. The ideal candidate should have: - Proficiency in Wiznet development - Proficiency in STM32 development - Extensive experience with Ethernet connectivity - Understanding of data transfer speeds and protocols. - STM32 and W5500 modules at hand Your job will be to write an optimal code, preferably in STM32CUBEIDE or Keil MDK Arm. The Wiznet W5500 is connected to STM...

I'm in need of an experienced Siemens PLC programmer to work on a project involving a S7-1500 model. The goal is to program various tasks related to servo systems. We have two servos linked with each other and have to move relative to one another. We have a 3d model of the assembly and should be simulated before delploying Key Requirements: - Expertise in Siemens PLC programming, specifically with the S7-1500 model. - Proficiency in programming servo tasks such as motion control, positioning, and synchronization. - Ability to work with existing hardware and servo motors setup. You should be able to understand and execute tasks related to motion control, positioning, and synchronization. Your experience with servo programming will be important, as the project is very ...

I looking for someone to design a PCB to include an MCU, Wifi module, and some headers Key Requirements: - The PCB should have an STM32 microcontroller (MCU) to carry out basic functions. - The design should incorporate an ESP32 Wi-Fi module for internet connectivity and a motor controller. - The complexity of the project is minimal. Deliverable: Using EasyEDA to design the PCB, I ask to receive a copy of the project, Gerber files, BOM, Pick and Place, and any other files required to manufacture the PCB. Ideal Freelancer: - Proficient in PCB design. - Experience with integrating MCUs and Wi-Fi modules. - Able to deliver a simple, no-frills design that works effectively. Please provide me with your quotes and examples of relevant projects you have worked on.

...a skilled PLC programmer with experience in Siemens systems for an assembly line automation project. The system is an integral part of our broader industrial automation initiative. Key Project Components: - The project involves optimizing and automating our assembly line processes. This includes streamlining the control and monitoring of processing machines and ensuring the efficient control of machinery. Key Responsibilities: - Design and develop the PLC control system in alignment with our assembly line automation needs. - Program the system for optimal performance, ensuring reliability and efficiency. - Integrate the PLC system with the rest of our industrial automation setup, to create a seamless, cohesive system. Ideal Candidate: - Proficiency in programmin...

I need assistance programming an Arduino Opta PLC for remote monitoring. - The device must: - Monitor all 8 voltage inputs. - Provide access to monitored data through a web interface. Including Bluetooth capabilities and Wifi. Needs to send emails to customers or notifications to my apps. Ideal Skills: - Proficient in Arduino programming - Experience with PLC programming - Knowledge about remote monitoring and control systems.

I'm in need of a programmer who is skilled in C++, Python, and has experience with PIC Kit 2 microcontroller. The job entails both programming the PIC Kit 2 and working on a specific project involving its application. Ideal Skills and Experience: - Proficiency in C++ and Python. - In-depth understanding of microcontrollers, with specific experience in PIC Kit 2. - Previous experience in programming PIC Kit 2 specifically. - Ability to work on a project involving PIC Kit 2. -Ability to understand PLC logic along with programming. Please note that I'm looking for someone with a strong background in these areas, as the project may involve complex programming tasks. If you believe you have the necessary skills and experience, kindly reach out to discuss the project in...

...the feasibility of implementing IoT solutions in the supply chain - Analyze the impact of IoT on the supply chain for lithium-ion battery production Ideal Candidate: - Extensive experience with IoT and its applications - Proficient in Python development and cloud data management - Comprehensive understanding of supply chains, specifically in lithium-ion battery manufacturing - Familiarity with PLC & SCADA, Edge Computing, wireless sensors and gateways - Strong research writing skills to aid in the comprehensive explanation of findings - Knowledge of MATLAB and Statistical Analysis tools would be an advantage. Your contribution could profoundly impact the efficiency and resilience of lithium-ion battery supply chains. Your work will not only provide immediate value to this ...

I'm looking for an Arduino expert to setup an Opta PLC that can effectively monitor temperature readings. The system should be able to: - Receive inputs from different temperature sensors and digital inputs. - Monitor a vast range of temperatures from below freezing to above 90°F. - Send email notifications of temperature readings and changes every hour for remote monitoring. The perfect freelancer for this project is experienced in programming Arduino Opta PLCs, utilizing sensors, particularly those for temperature, and setting up efficient email notification systems. Beside technical proficiency, good understanding of thermodynamics would be a plus, but is not a requirement. The end-goal is an efficient and reliable remote temperature monitoring system.

I need a skilled professional to add (2) Adjustable analog input noise filters to an existing ( Kinco builder) program. The filter intensity needs to be adjustable In the settings screen on the HMI.(Kinco D tools)

Resetting our FireLaser DTS with a Siemens Logo device using Modbus

...the attachment. The pulse generated by the motorcontroller won’t exceed 500 Hz with our current motor/motorcontroller configuration. (see peripheral list: section motorcontroller) In total we need to have: Digital inputs: 12 Digital fast inputs (counter): 2 Analog inputs: 2 Digital outputs: 6 Analog outputs: 2 Key deliverable: A fully programmed NUCLEO-G491RE STM32 and ESP32-DEVKITC-32UE microcontroller that controls a sliding gate according to an already provided functional description (fragments of this description in the attachment). More detailed information concerning the functional description will follow, when discussing the task. Description of the project: Movement control: The controller coordinates the motion of the cantilevered gate, prompting the drive mechan...

I'm looking for an experienced PLC programmer to configure the 100-PLC-010/020 model for a process control system. Key Points: - Model: 100-PLC-010/020 - Purpose: Process Control - Required Communication Protocol: Ethernet/IP Your responsibilities will include: - Setting up the PLC in a way that ensures the smooth operation of the process control system. - Configuring the system to align with the required Ethernet/IP communication protocol. - Conducting thorough testing to ensure the system performs efficiently and effectively. The ideal freelancer for this job should have: - Proven experience in PLC programming, with a focus on process control systems. - In-depth knowledge of the 100-PLC-010/020 model. - Expertise in configuring PLC...

I am seeking a seasoned PCB designer for my upcoming project. The project involves th...used in an embedded system for a power electronics, consumer product. Key requirements are: - Profound understanding of PCB design for embedded systems - Experience with power electronics The primary function of this PCB is power management. Thus, proficiency in optimizing PCB designs for energy efficiency is highly desirable. The PCB should include the following features/components: - Microcontroller - Voltage regulator - Display interface - Resistance - Capacitor - Diodes - Integrated Circuits - Transistor - IGBT - MOSFET Experience in integrating these components on a double-sided PCB is mandatory. Please detail your related experience and skills in your bid. Looking forward to seeing ...

I'm looking for experienced circuit designer who can design sensing circuit for RTD temperature sensor. Sensing should be done by STM32F103 microcontroller ADC. There should be 8 channels for RTD temperature sensor. I need Schematic design and sample code to read temperature value. Only bid if you have experience with RTD temperature sensor.

I'm looking for a skilled developer to create an android app that will connect with machine hardware via Bluetooth and communicate with an ESP32/similar microcontroller. Also design a PCB to integrate the microcontroller with the machine's electronically operated devices. - Design: I don't have a specific design in mind, so I'd need your help with designing the app. - Design: Design a pcb to integrate microcontroller and other electronically operated features. - Functionality: The key functionality of the app will be to control the LEDs on the machine. More specifically, I'd like the LEDs to be used to scan an object. Ideal skills and experience for this job include: - Proficient in Android app development - Experience with Bluetooth integra...

I need a freelancer skilled in microcontrollers, specifically with the IMXMRT1062. - I require the embedded flash memory program file to be read, for the purpose of debugging. - I am currently using the MCUXpresso IDE with the microcontroller. - The task will involve not only identifying issues, but also providing guidance on how to resolve them. Ideal skills for this project include: - Proficiency with microcontroller programming, particularly IMXMRT1062 - Experience with the MCUXpresso IDE - Debugging skills - The ability to provide clear and concise guidance on issue resolution.

...use a Seeed Studio microcontroller controlling different types of accelerometers. If the person has a better approach, I have no problem following their advice. Below is a list of the components I am considering using in this project: Sensors: Microcontroller:

I need to create a small educational program for work related to PLC. OBJECTIVE: I need to do a job, where a program reads 3 numbers and sorts these 3 numbers in ascending or descending order, and checks which one has the highest value. The software to be used is OMRON's CX-Programmer. The controller would be Omron's CJ1M. This work is for educational purposes so it should be simple but well structured. The structure of the program should have some similarities with the attached images (ATTACHED IMAGES ARE AN EXAMPLE ONLY)! Please try to use simple or the more commun functions. As it is an educational program, it must be as simple as possible, but at the same time it must be well structured to presentation. Thanks IMPORTANT: The software to use is CX-Programmer (v9.73)...

I'm looking for a freelancer who is an expertise of drying - particularly apron drying. The following designs are required for this project: Feeding mechanism Fan and airflow determination Apron design Controls and PLC Material to dry : potato paste

I need to create a small educational program for work related to PLC. OBJECTIVE: I need to do a job, where a program reads 3 numbers and sorts these 3 numbers in ascending or descending order, and checks which one has the highest value. The software to be used is OMRON's CX-Programmer. The controller would be Omron's CJ1M. This work is for educational purposes so it should be simple but well structured. The structure of the program should have some similarities with the attached images (ATTACHED IMAGES ARE AN EXAMPLE ONLY)! Please try to use simple or the more commun functions. As it is an educational program, it must be as simple as possible, but at the same time it must be well structured to presentation. Thanks Regards

I'm in search of a skilled cybersecurity writer to create a comprehensive article on PLC (Programmable Logic Controller) Algorithm Security for a professional audience. Requirements: - The article should delve into in-depth technical analysis, offering thorough insights and understanding of PLC Algorithm Security. - The preferred word count for this piece is 1000 - 1500. - The target audience is primarily cybersecurity professionals; the content should be engaging and informative for this group. - A clear focus on critical insights and mitigation strategies in the realm of PLC Algorithm Security is a must. Ideal Skills and Experience: - Proven track record in cybersecurity writing. - An understanding of the nuances of PLCs, industrial automation, and cybersecur...

I'm in need of an Arduino Programmer with expertise in DC motor control, programming logic, and inductive proximity sensor integration. Specific tasks include: - Programming logic for the DC motor microcontroller - Integrating an inductive proximity sensor for object detection - Implementing a speed regulation function (slow start, slow stop, foward, reverse speed and delay start) for motor control Please find the project detail on the attached document.

I'm looking for a professional programmer who specializes in IC programming, specifically for smoke detectors. Key Tasks Include: - Reading and writing IC data for smoke detectors. - Handling and operating microcontroller IC chips effectively. The ideal candidate should have: - Solid experience in IC programming. - In-depth knowledge of microcontroller IC chips. - An understanding of smoke detector systems is a plus. Knowing how to troubleshoot and debug chips will offer a huge advantage. Please respond with examples of related projects you've completed and your approach to tasks like this.

According to the attached diagram it is necessary to measure the electrical conductivity value with an ESP32 and via RS485 Modbus transfer the value to a Siemens S71200 PLC. In addition to the creation of the software, the project must be tested online with the PLC and the acquisition system as per the diagram. The communication parameters are 9600,N,8,1 and the slave is number 2

I'm looking for a skilled professional to simulate & test of my microcontroller based hardware design, using proteus and test its performance. Also, if there is any performance bugs, need to correct it and also, build pcb prototype and physically test the performance

I'm looking for a skilled professional to cre...And Google ad campaign aimed to increase enrollment for our Data Analytics and PLC Automation courses at our Jaipur center - www.seldomindia.com. Target Audience: - Working professionals - College students Value Proposition: Our course offers: - Enhanced career opportunities - Practical skills with real-world applications - Expert-led training leveraging industry experience The ideal freelancer for this role should have a proven record in creating successful Facebook ad campaigns, specifically in the education sector. Understanding and experience in effectively targeting both working professionals and college students would be a significant advantage. Knowledge of education pertaining to data analytics and PLC automati...

...maintain the systems to ensure they are running smoothly. - Creating New Systems: Help to develop new MES and SCADA systems as needed. This is a consulting position with the possibility of further work. It is expected to be completed within 1-3 months. I need someone who can demonstrate their experience in this field with a portfolio. It's a plus if you have experience in the following: - PLC programming - HMI design - Robotic integration - SCADA and DSC - Drives implementation - CAD for industrial automation - Hydraulic and Pneumatic systems expertise - Experience with Industrial Switchgear and Solutions - Assistance with Automation & Control Panel Manufacturing - Support with Vfd Panel Supply, and Industrial Panel Manufacture - Contribution to Indus...

As a project manager requiring embedded software engineering, I need qualified candidates to handle firmware development, device driver programming, as well as embedded systems testing and debugging. The target platform is a microcontroller and the primarily language utilized will be C. Ideal Skills and Experience: - Proficient with C programming language - Extensive experience and understanding of firmware development - Competence in device driver programming - Proven background in embedded systems troubleshooting and debugging - Familiar with microcontroller platform

I need a PCB for controlling the residential electric current (220VAC) using the following componenets: - ESP32 as microcontroller -1 relay 3VD/220AC as an actuator - LoRa module (SX1278) to communicate with others equipments (already developed and manufactured). - RTC module (DS3231) for getting timeStamp. - An AC/DC currrent transofrmer (220VAC/12VDC) is needed to feed the entire circuit from the same electric source we are controling. - 2 voltage regulator: 12/5VDC and 5/3.3VDC I've design several measurements devices using ESP32, LoRa , RTC to create a monitoring net. This is a first control device that will be inluded. So there are a lot of material that this work can lean on.

...duration. - Activate a solenoid latch: This component is crucial as it performs a critical function in the project. The solenoid latch should be triggered once the motor is on and the music is playing. - Stop the music and motor: Once the solenoid latch has been activated, the MP3 player and motor should stop automatically. Ideal Skills and Experience: - Proficient in Arduino or any other microcontroller programming - Previous experience in working with motors, MP3 modules, and solenoid latches - Familiarity with crash sensor micro switches and their implementation - Strong problem-solving skills to troubleshoot any potential issues - Ability to deliver a clear and well-commented sketch for future reference. If you have the expertise, creativity, and experience to bring t...

I'm looking for an experienced IoT developer who can create an Arduino-based system that triggers actions or alerts based on scraped text data from a website. Key Responsibilities: - Develop a system using Arduino, Raspberry Pi, and ESP32 microcontroller - Implement website scraping functionality to extract specific text content - Design a mechanism to trigger predefined actions or alerts based on the scraped data Ideal Experience: - Proficient in Arduino programming - Familiarity with ESP32 microcontroller and Raspberry Pi - Experience with website scraping techniques - Ability to integrate scraped data to trigger actions or alerts on an IoT system Please note that my preferred programming language wasn't specified. Feel free to suggest the most appropriate lan...

I'm looking for a skilled PLC programmer to help set up a labeling system in our plant that counts and labels finished products. Key Responsibilities: - Program an Omron Nx102-9020 PLC to count finished products accurately - Configure the PLC to automatically print labels for the counted items Ideal Skills and Experience: - Proficiency with Omron PLC programming - Experience in industrial automation and control systems - Knowledge of labeling systems and their integration with PLCs - Strong problem-solving and troubleshooting skills - Attention to detail and precision in system setup.

...module in my circuit design utilizing a SAMD51 microcontroller, I'm in need of expert assistance to address some issues with my current PCB design. I have the existing design and fab files at hand, but the project has not achieved its full functionality. - Key Issues: The circuit is experiencing power supply issues presumed to stem from the Voltage regulator, compatibility issues with the microcontroller, and an unresponsive USB output. These are the primary targets for debugging and solution creation. - Ideal Expertise: I am seeking an experienced engineer knowledgeable in PCB design, solar power modules, and the SAMD51 microcontroller. The individual must have a track record of troubleshooting and resolving power supply issues, microcontroller misma...

I need an expert in PCB design to create a small magnetic levitation motor. My ideal designer would possess stellar skills in: - Microcontroller-based circuit design. - Magnetic levitation systems. - Power efficiency management. The project doesn't require utmost power efficiency, a basic level would suffice. Although compact, this tiny maglev motor device should be firm and durable with functionality on par with larger models. A prototype, design files and instructions for assembly/testing will be essential deliverables. Previous experience working on similar miniaturized projects would be advantageous. Your ingenuity will be crucial in the success of this project. Let’s chat more about how you can help bring my vision to life. This magnetic levitation motor is used ...

Our company background is in palm oil mill and refinery field. We needed a programmer that can program our current scada program to infuse additional sensors information coming from other siemens PLC. We have three PLC to combine.

I am seeking a seasoned Siemens PLC programmer who is skilled in industrial automation. Key Responsibilities: - Must be proficient in various programming languages including ladder logic, structured text, and function block diagram. - Experience working with different Siemens PLC models, though specific model preference was not indicated. - The project involves tasks related to Industrial automation, so any experience in this field would be highly advantageous. Ideal Skills: - Proficiency in Siemens PLC programming - Prior experience in Industrial Automation - Knowledge and experience in ladder logic, structured text, and function block diagram - Ability to work with a variety of Siemens PLC models.

I am currently in need of a seasoned PLC programmer for a process control project. I have a Panasonic Delta PLC and would prefer to make use of Ladder Logic for the programming language. Key Details: - The core of this project is process control. - You'll be working with Panasonic Delta PLC. Ideal Skills and Experience: - Expertise in PLC Programming - Familiarity with Panasonic Delta PLCs - Proficiency in Ladder Logic - Background in process control The freelancer with these specific skills and experiences will be given top consideration. The project is set to begin immediately upon finding a suitable candidate.

...at designing and developing a joystick controller and driver unit for application in the biomedical technology sector. Key Requirements: - The product should be compatible with medical equipment in a way that it can seamlessly drive a 24V wheelchair. - The joystick controller and the driver unit should be a complete, integrated system. Communication Interface: - I prefer a programmable microcontroller and driver unit that can communicate with UART communication protocol Ideal Skills: - Proficiency in industrial product design, especially joystick controllers and driver units. - Experience in medical technology will be a valuable asset. - Knowledge in wired communication protocols like UART is essential for the job. the most important detail of the project as follow : A...

I run an industrial automation company specializing in PLC programming, HMI design,SCADA & DCS Design, robotic integration, and more. I am in need of a freelancer well-versed in these areas to assist us with a variety of tasks. Key services required include: - PLC programming - HMI design - Robotic integration - SCADA and DSC - Drives implementation - CAD for industrial automation - Hydraulic and Pneumatic systems expertise - Experience with Industrial Switchgear and Solutions - Assistance with Automation & Control Panel Manufacturing - Support with Vfd Panel Supply, and Industrial Panel Manufacture - Contribution to Industrial Automation Training & Solutions Preference for these brands: - SIEMENS -Rockwell Automation -ABB -Mitsubishi -Honeywell -DELTA Ideally...

I require an intricate hardware developer with technical mastery to custom design an...4 lines of 5V DC and a common ground 2. Isolate the inputs and ground and connect them to the Arduino-compatible microcontroller like ATmega2560. Use interrupt pins to connect. 3. The power and communication should be provided via USB. 4. Use micro-controllers with built-in boot-loader or otherwise take care of the boot-loader flashing to be compatible with Arduino framework. Preferred PCBA design software: Autodesk EAGLE or Fusion 360 Potential freelancers must possess proficient hardware development experience, Arduino platform familiarity, and a strong understanding of signal transmission systems for an effective design realization. Experience with ATmega2560 microcontroller will be an...

We are seeking a highly skilled PCB designer to develop a custom board featuring the RP2040 microchip to control multiple DC motors and MOSFETs, with integrated voltage regulation. This project requires expertise in high-power applications, voltage regulation, and serial communications. Project Requirements: Microcontroller: RP2040 chip to manage all operations. Power Handling: Board must handle input of 24V. Voltage Regulation: Conversion of 24V input to 12V and 5V outputs. MOSFETs: 5 MOSFETs for 24V, 7A control. 4 MOSFETs for 12V, 5A control. Communication: USB Type-C for robust serial communication. Inputs and Outputs: 2 analog inputs. 1 One Wire communication interface. Additional pins for digital input/output as required. Deliverables: Complete PCB design files ready for man...

... VPD sensor PH sensor EC sensor Water level sensor - Output : 2 x Peristaltic pumps 2 x 12v pumps AC Fan (PWM-controlled EC-motor) 220v water motor pump (using Solid State Relay) inputs/outputs will need to be set up and configured and based on the reading of the input sensors the Microcontroller will control the outputs. The successful freelancer will need to provide the following : Full electronic diagram. List of the parts needed other than the inputs sensors and the outputs. Programing code. Ideal skills for this project include, but are not limited to: - Proficiency in programming with the ESP32 platform - Experience in working ...

I'm in need of an experienced developer who can help me write a code for interfacing a 16x2 LCD and RC522 RFID sensor with the Megawin MG82F6D17 microcontroller. The ideal freelancer should be proficient in: - Interfacing the LCD and RC522 sensor with the MG82F6D17 microcontroller - Implementing basic text display features on the LCD - Reading ID data from the RFID tags with the RC522 sensor A deep understanding of microcontrollers and RFID technology is a must for this project. The final code should reliably display the ID data from the RFID tags on the LCD.

...an ARM Cortex microcontroller. The ideal candidate should be proficient in C/C++ programming languages. Key Requirements: - Embedded Software Development: The primary task for this project is to design, implement, and debug the embedded software. Please have a proven track record of working with embedded systems. - ARM Cortex Experience: Familiarity with ARM Cortex microcontrollers is crucial. You should be comfortable with the architecture and able to optimize performance for the given use case. - C/C++ Proficiency: Strong programming skills in C/C++ are a must. You will be developing applications on this platform, so experience in these languages is critical. Your responsibilities will include: - Designing and developing embedded software for an ARM Cortex microcontrol...

...experience in developing a Mitsubishi PLC program. The program is intended to control equipment using PID (Proportional, Integral, Derivative) control system. It should be able to handle both analog and digital input/output signals. Key requirements include: - Developing a Mitsubishi PLC program for PID control - Integrating both analog and digital input/output signals into the PLC program - Ensuring the program is efficient and effective in controlling the equipment The ideal candidate should have: - Proven experience in developing Mitsubishi PLC programs - Expertise in PID control system - Previous work with both analog and digital signals - Ability to deliver efficient and effective control systems I have a small test job that needs completing The ...